GS280 280W AC-DC Industrial Adaptor series ■ Features : Universal AC input / Full range Built-in active PFC function No load power consumption<0.5W Energy efficiency Level Ⅴ Comply with EISA 2007, NRCan, AU/NZ MEPS and EU ErP 3 pole AC inlet IEC320-C14 Class I power (with earth pin) Protections: Short circuit / Overload / Over voltage / Over temperature Fully enclosed plastic case Fanless design, cooling by free air convection LED indicator for power on 2 years warranty (only for 12V/15V) SPECIFICATION GS280A12-C4P ORDER NO. SAFETY MODEL NO. DC VOLTAGE OUTPUT GS280A12 Note.2 12V PROTECTION NOTE GS280A24-C4P GS280A48-C4P GS280A20 20V GS280A24 24V GS280A48 48V 18.5A 16A 13A 11.67A 5.84A 0 ~ 18.5A 0 ~ 16A 0 ~ 13A 0 ~ 11.67A 0 ~ 5.84A RATED POWER (max.) 222W RIPPLE & NOISE (max.) Note.3 120mVp-p 240W 260W 280.08W 280.32W 120mVp-p 150mVp-p 280mVp-p 280mVp-p VOLTAGE TOLERANCE Note.4 ±5.0% ±5.0% ±4.0% ±3.0% ±2.0% LINE REGULATION Note.5 ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±5.0% ±5.0% ±4.0% ±3.0% ±2.0% 93% 94% SETUP, RISE TIME Note.6 2000ms, 20ms / 230VAC HOLD UP TIME (Typ.) VOLTAGE RANGE Note.7 90 ~ 264VAC 16ms / 230VAC 2000ms, 20ms / 115VAC at full load 16ms / 115VAC at full load 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.95 / 230VAC EFFICIENCY (Typ.) 89% AC CURRENT (Typ.) INRUSH CURRENT (max.) 3A / 115VAC PF>0.98 / 115VAC at full load 89.5% 92% 1.5A / 230VAC 120A / 230VAC LEAKAGE CURRENT(max.) 1.5mA / 240VAC OVERLOAD 105 ~ 135% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 105 ~ 135% rated output voltage Protection type : Shut down o/p voltage, re-power on to recover OVER VOLTAGE OVER TEMPERATURE Shut down o/p voltage, re-power on to recover WORKING TEMP. WORKING HUMIDITY -30 ~ +60℃ (Refer to "Derating Curve") 20% ~ 90% RH non-condensing SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note. 8) EMC EMISSION EMC IMMUNITY CONNECTOR GS280A20-C4P GS280A15 15V CURRENT RANGE ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION OTHERS GS280A15-C4P RATED CURRENT LOAD REGULATION INPUT (except for 48V) -40 ~ +85℃, 10 ~ 95% RH ±0.03% / ℃ (0~40℃) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, CSA C22.2, TUV EN60950-1, BSMI CNS14336, CCC GB4943, PSE J60950-1(except for 48V) approved I/P-O/P: 3KVAC I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55022 class B, EN61000-3-2,3, FCC PART 15 / CISPR22 class B, CNS13438 class B, GB9254, GB17625.1 Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A PACKING PLUG 173.6Khrs min. MIL-HDBK-217F(25℃) 220*95*46mm (L*W*H) 1.25Kg; 12pcs/16Kg/1.27CUFT See page 2 ; Other type available by customer requested CABLE See page 2 ; Other type available by customer requested MTBF DIMENSION 1. All parameters are specified at 230VAC input, rated load, 25℃ 70% RH ambient. 2. DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3. Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4. Tolerance: includes set up tolerance, line regulation, load regulation. 5. Line regulation is measured from low line to high line at rated load. 6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 7. Derating may be needed under low input voltage. Please check the derating curve for more details. 8. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) File Name:GS280-SPEC 2015-06-01 GS280 280W AC-DC Industrial Adaptor Mechanical Specification Case No. GS280A 46 series Unit:mm 220 POWER LED UL2464 16AWGx4C 1000 ± 50mm 50 ± 3mm 95 4 3 2 1 Plug Assignment , Standard power supply model s male connector : Housing AMP 1-480702-0 with inner pin 9848TP (6.35mm), or equivalent Female connector (not provided with the power supply) : Housing AMP 1-480703-0 with inner pin 9848TR (6.35mm), or equivalent C4P PIN NO. OUTPUT 4 3 2 1 1,2 +V 3,4 -V -V connected to AC FG Female plug(customer side, not provide with the power supply): AMP 1-480703-0 equivalent Derating Curve Static Characteristics 100 100 230VAC for others LOAD (%) LOAD (%) 90 80 110VAC for 12V~15V 60 50 40 80 70 60 50 20 -30 40 0 10 20 30 35 40 50 AMBIENT TEMPERATURE (℃) 60 70 (HORIZONTAL) 90 95 100 110 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:GS280-SPEC 2015-06-01