GS15A 15W AC-DC Industrial Adaptor series ■ Features : Universal AC input / Full range 3 pole AC inlet IEC320-C14 No load power consumption <0.075W Energy efficiency Level Ⅵ Comply with EISA 2007/DoE, EU ErP and meet CoC version 5 Class I power ( with earth pin) Protections: Short circuit / Overload / Over voltage Pass LPS Fully enclosed plastic case 2 years warranty SPECIFICATION ORDER NO. SAFETY MODEL NO. DC VOLTAGE OUTPUT GS15A-1P1J GS15A-11P1J GS15A-2P1J GS15A-3P1J GS15A-4P1J GS15A-5P1J GS15A-6P1J GS15A-1 GS15A-1-1 GS15A-2 GS15A-3 GS15A-4 GS15A-5 GS15A-6 GS15A-8 7.5V 9V 12V 15V 18V 24V 48V 0.31A Note.2 5V GS15A-8P1J RATED CURRENT 2.40A 1.60A 1.66A 1.25A 1.00A 0.83A 0.62A CURRENT RANGE 0 ~ 2.40A 0 ~ 1.60A 0 ~1.66A 0 ~ 1.25A 0 ~ 1.00A 0 ~ 0.83A 0 ~ 0.62A 0 ~ 0.31A RATED POWER 12W 12W 15W 15W 15W 15W 15W 15W RIPPLE & NOISE (max.) Note.3 50mVp-p 80mVp-p 80mVp-p 80mVp-p 100mVp-p 120mVp-p 150mVp-p 240mVp-p VOLTAGE TOLERANCE Note.4 ±5.0% ±5.0% ±5.0% ±3.0% ±3.0% ±3.0% ±2.0% ±2.0% LINE REGULATION Note.5 ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION Note.6 ±5.0% ±5.0% ±5.0% ±3.0% ±3.0% ±3.0% ±2.0% ±2.0% 85% 85% 85% 85% 85.5% 87% SETUP, RISE, HOLD UP TIME 3000ms, 50ms, 16ms at full load 90 ~ 264VAC 135 ~ 370VDC VOLTAGE RANGE INPUT FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 80% AC CURRENT INRUSH CURRENT (max.) 0.5A / 100VAC 0.25mA / 240VAC OVERLOAD 105 ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed >120% rated output voltage Protection type : Clamp by zener diode 0 ~ +50℃ (Refer to "Derating Curve") 20% ~ 90% RH non-condensing -20 ~ +85℃, 10 ~ 95% RH OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note. 7) EMC EMISSION EMC IMMUNITY MTBF CONNECTOR NOTE 50A / 230VAC LEAKAGE CURRENT(max.) PROTECTION OTHERS 82.5% ±0.03% / ℃ (0 ~ 40℃) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, CSA C22.2, TUV EN60950-1 approved I/P-O/P:3KVAC , I/P-FG:1.5KVAC I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55022 Class B, EN61000-3-2,3, FCC part 15 Class B Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A DIMENSION PACKING PLUG 500Khrs min. MIL-HDBK-217F(25℃) 100*58.5*32.8mm (L*W*H) 190g ; 90pcs / 18Kg / CARTON See page 2 ; Other type available by customer requested CABLE See page 2 ; Other type available by customer requested 1.All parameters are specified at 230VAC input, rated load, 25℃ 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load. 7.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) File Name:GS15A-SPEC 2015-09-15 GS15A 15W AC-DC Industrial Adaptor Mechanical Specification series Unit:mm 32.8 UL1185 18AWG 1200 +150/-0mm for 5~15V UL1185 18AWG 1800 +150/-0mm for 18~48V 100 32.8 11±0.5 58.5 C"+" ID 2.1 x OD 5.5 Outside 32.8 100 Plug Assignment 64 29.25 Standard plug: P1J 58.5 36 58.5 Inside P1J P/N OUTPUT CENTER + NAME PLATE Derating Curve Static Characteristics 100 90 LOAD (%) LOAD (%) 100 70 80 70 60 50 40 0 10 20 30 40 AMBIENT TEMPERATURE (℃) 50 90 95 100 110 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:GS15A-SPEC 2015-09-15