GSC18E 18W Single Output LED Power Supply F 110 M M ■ Features ‧ Universal AC input / Full range (up to 277VAC) ‧ 2 pole EURO plug ‧ Built-in active PFC function ‧ Constant current design ‧ Protections: Short circuit ‧ Cooling by free air convection ‧ Fully isolated plastic case ‧ Class Ⅱ power unit, no FG ‧ No load power consumption<0.15W ‧ Low cost, high reliability ‧ 100% full load burn-in test ‧ 3 years warranty SELV IP30 series 05 ■ Applications ‧Indoor LED lighting ‧Office lighting ‧Commercial lighting ‧Indoor LED decorative lighting ■ Description GSC18E series is a 18W external wall-mounted LED power supply with PFC function. The design of this pr oduct is based on th e “ plug and play ” conc ept for adapto rs. Th e AC input side expl oits the 2- Pol e (Class Ⅱ, no FG) standard European plug, and the output side is equipped with the highly accepted DC connector (2.1x5.5x11mm) in the market. This product accepts 90~277VAC input and offers various constant current output models with 350mA/500mA/700mA/1050mA/1400mA. The design complies with the lighting requirements of EMI EN55015 and the harmonic current demand per EN61000-3-2 Class C. In addition, the no load power consumption is less than 0.15W, and the setup time is less than 500ms, making GSC18E conform to the ErP regulation required by European Union for lighting systems as well. ■ Model Encoding GSC 18 E - 350 Output current European 2 pin AC inlet Output wattage Series name File Name:GSC18E-SPEC 2015-04-16 GSC18E 18W Single Output LED Power Supply series SPECIFICATION MODEL RATED CURRENT GSC18E-350 GSC18E-500 GSC18E-700 GSC18E-1050 GSC18E-1400 350mA 500mA 700mA 1050mA 1400mA 18 ~ 36V 13 ~ 26V 8 ~ 17V 6 ~ 13V OPERATING VOLTAGE RANGE Note.4 26 ~ 52V CURRENT ACCURACY Note.3 ±8.0% OUTPUT INPUT 18W 18.2W 17.9W 18.2W RIPPLE & NOISE (max.) Note.2 4.6Vp-p RATED POWER 3Vp-p 2.5Vp-p 1.6Vp-p 1.6Vp-p NO LOAD OUTPUT VOLTAGE (max.) 70V 50V 35V 25V 18V SETUP TIME 500ms / 230VAC 1000ms / 115VAC at full load VOLTAGE RANGE 90 ~ 277VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 89% AC CURRENT (Typ.) INRUSH CURRENT(max.) 0.6A/115VAC 0.3A/230VAC 0.2A/277VAC COLD START 17A(twidth=110μs measured at 50% Ipeak) at 230VAC LEAKAGE CURRENT WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT EMC CONNECTOR NOTE 88.5% 88.5% 87% <0.5mA / 240VAC 20 ~ 95% RH non-condensing -40 ~ +80℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS Dekra GS/ENEC EN61347-1, EN61347-2-13 listed, EN62384 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55015, EN61000-3-2 Class C (≧50% load) ; EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11,EN61547, light industry level, criteria A EMC EMISSION DIMENSION PACKING PLUG CABLE 85.5% Hiccup mode, recovers automatically after fault condition is removed. -30 ~ +50℃ (Refer to "Derating Curve") VIBRATION EMC IMMUNITY MTBF OTHERS 127 ~ 392VDC POWER FACTOR (Typ.) PF>0.98/115VAC, PF>0.92/230VAC, PF>0.91/277VAC at full load (Please refer to "Power Factor Characteristic" curve) TOTAL HARMONIC DISTORTION Total harmonic distortion will be lower than 20% when output loading is 75% or higher PROTECTION SHORT CIRCUIT SAFETY & 18.2W 338.3K hrs min. MIL-HDBK-217F (25℃) 79*54*33mm (L*W*H) 191g ; 60pcs / 12.5kg / CARTON 2.1ψ * 5.5ψ * 11mm, tuning fork type, center positive for stock See page 4 ; Other type available by customer requested 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Please see "AC input voltage drop vs. output current characteristics" table. 4. Constant current operation region is within 50% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. 5. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers. File Name:GSC18E-SPEC 2015-04-16 GSC18E 18W Single Output LED Power Supply series Block Diagram fosc : 100KHz EMI FILTER & RECTIFIERS I/P RECTIFIERS & FILTER POWER SWITCHING +V -V O.L.P. PWM & PFC CONTROL Derating Curve Static Characteristics 100 100 90 80 80 70 60 60 40 50 20 40 -30 -20 -10 0 15 30 40 50 60 (HORIZONTAL) 90 100 AMBIENT TEMPERATURE (℃) 125 135 145 155 165 175 180 200 230 277 INPUT VOLTAGE (V) 50 / 60Hz Power Factor Characteristic Constant Current Mode 1 0 .9 8 0 .9 6 0 .9 4 0 .9 2 277VAC 0 .9 230VAC 0 .8 8 115VAC 0 .8 6 0 .8 4 0 .8 2 0 .8 50% 60% 70% 80% 90% 100% (18W) LOAD File Name:GSC18E-SPEC 2015-04-16 GSC18E 18W Single Output LED Power Supply series EFFICIENCY vs LOAD (GSC18E-350) GSC18E series possess superior working efficiency that up to 89% can be reached in field applications. 94 93 92 91 277VAC 90 230VAC 115VAC 89 88 87 86 50% 60% 70% 80% 90% 100% LOAD AC input voltage drop vs. Output current characteristics AC input drop 10% 8% 5% 3% Io drop <25% <23% <15% <10% Note : Output current will return to the rated value within 80ms Mechanical Specification Unit:mm UL1185 18AWG 1500±50mm 10 70±10mm 65 C"+" T case 11±0.5mm ID 2.1 x OD 5.5 NAME PLATE ※ T case: Max. Case Temperature. 79 33 Installation Manual Please refer to : http://www.meanwell.com/webnet/search/InstallationSearch.html File Name:GSC18E-SPEC 2015-04-16