DCW12 12W DC-DC Regulated Dual Output Converter series ■ Features : •2:1 wide input range •1500VDC I/O isolation •Built-in remote ON/OFF control •Built-in EMI filter •Protections: Short circuit / Overload •Cooling by free air convection •Five-sided shield metal case •100% full load burn-in test •Low cost / High reliability •2 years warranty SPECIFICATION ORDER NO. OUTPUT DCW12A-05 DCW12B-05 DCW12C-05 DCW12A-12 DCW12B-12 DCW12C-12 DCW12A-15 DCW12B-15 DCW12C-15 DC VOLTAGE ±5V ±12V ±15V CURRENT RANGE ±240 ~ ±1200mA ±100~ ±500mA ±80 ~ ±400mA RATED POWER 12W 60mVp-p 60mVp-p 100uF 47uF RIPPLE & NOISE (max.) Note.2 50mVp-p LINE REGULATION Note.3 ±0.5% LOAD REGULATION Note.4 ±0.5% VOLTAGE ACCURACY ±2.0% SWITCHING FREQUENCY 400KHz min. EXTERNAL CAPACITANCE LOAD (max.) 670uF VOLTAGE RANGE A: 9 ~ 18VDC B: 18 ~ 36VDC C: 36 ~ 72VDC 80% 80% 81% 84% EFFICIENCY (Typ.) INPUT Full load DC CURRENT No load A: 70mA Pi network FILTER PROTECTION Note.5 A: 1245mA B: 625mA B: 35mA 84% 84% 83% C: 25mA PROTECTION Fuse recommended OVERLOAD 110 ~ 180% rated output load Protection type : Hiccup mode, recovers automatically after fault condition is removed All output equipped with over current protection SHORT CIRCUIT 84% 83% C: 320mA Protection type : Hiccup mode, recovers automatically after fault condition is removed WORKING TEMP. -40 ~ +71℃ (Refer to "Derating Curve") WORKING HUMIDITY 20% ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +105℃, 10 ~ 95% RH ±0.05% / ℃ (0 ~ 50℃) TEMP. COEFFICIENT VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes WITHSTAND VOLTAGE I/P-O/P:1.5KVDC ISOLATION RESISTANCE I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH SAFETY & ISOLATION CAPACITANCE 2200pF max. EMC Compliance to EN55022 Class A, FCC part 15 Class A EMC EMISSION Compliance to EN61000-4-2,3,4,5,6,8, light industry level, criteria A EMC IMMUNITY Power ON: R.C. ~ -Vin > 4VDC or open ; Power OFF: R.C. ~ -Vin < 1VDC or short REMOTE CONTROL MTBF 600Khrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 31.8*20.3*12.2mm (L*W*H) or 1.25"*0.80"*0.48" inch (L*W*H) 18.5g PACKING Derating Curve Pin Configuration Mechanical Specification Unit:mm(inch) 3 BOTTOM VIEW 16 9 14 11 SIDE VIEW 5.08(0.20) 15.24(0.60) 2.54(0.10) 3.81(0.15) 12.2(0.48) 31.8(1.25) 22 2.0(0.08) 2.54(0.10) 2.54(0.10) 15.26(0.60) 23 1 2 Pin No. Output 1 2&3 9 11 14 16 22 & 23 R.C. - Vi n COM - Vo u t + Vo u t COM + Vi n 100 LOAD (%) 0.6ψ + 0.2/-0 20.3(0.80) 60 -40 0 25 50 60 71 100 Ta (℃) NOTE 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 20% to 100% rated load. 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds. File Name:DCW12-SPEC 2014-08-13