MB12S thru MB110S MOSPEC Surface Mount Schottky Bridge Rectifier Reverse Voltage 20 to 100 Volts Forward Current 1.0 Ampere Features ◆ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ◆ High surge overload rating:30A peak ◆ Saves space on printed circuit boards ◆ High temperature soldering guaranteed:260℃/10 seconds Mechanical Data ◆ Case:Molded plastic body over passivated junctions ◆ Terminals: plated leads solderable per MIL-STD-750, Method 2026 ◆ Mounting Position:Any ◆ Weight:0.078 oz.,0.22g Maximum Ratings & Electrical Characteristics (TA=25℃ unless otherwise noted) Parameter Symbol MB12S MB14S MB16S MB18S MB110S Unit Maximum repetitive peak reverse voltage VRRM 20 40 60 80 100 V Maximum RMS voltage VRMS 14 28 42 56 70 V Maximum DC blocking voltage VDC 20 40 60 80 100 V Maximum Average forward output current IF(AV) 1.0 A IFSM 30 A Peak forward surge current 8.3 MS single HALF sine-wav superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.0A Maximum DC reverse current at TA=25℃ rated DC blocking voltage per leg TA=100℃ Typical thermal resistance per leg(Note1) Operation junction temperzture range Storage temperature range VF IR 0.50 0.70 0.85 V 0.5 mA 20 RθJA 88 RθJL 28 Tj -55 to +150 ℃ TSTG -55 to +150 ℃ ℃/W Notes: 1. Thermal resistance form junction to ambient and from junction to lead P.C.B. mounted on 0.2×0.2"(5.0×5.0mm) copper pad areas. MOSPEC MB12S thru MB110S Surface Mount Schottky Bridge Rectifier Reverse Voltage 20 to 100 Volts Forward Current 1.0 Ampere Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted)