G2SB460-E THRU G2SB480-E SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 600V to 800V Current:4.0A Features GBL Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Glass passivated chip junction High case dielectric strength Typical IR less than 0.1µA High surge current capability Ideal for printed circuit boards High temperature soldering guaranteed: 260°C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3kg ) tension Halogen Free Mechanical Data Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Mounting Position: Any Weight: 0.071 oz., 2.0 g Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) Symbol G2SB460-E G2SB480-E units Maximum Recurrent Peak Reverse Voltage Vrrm 600 800 V Maximum RMS Voltage Vrms 420 560 V Maximum DC blocking Voltage Vdc 600 800 V Maximum average forward Tc=50°C(Note1) rectified output current at Ta=40°C(Note2) Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load Maximum Instantaneous Forward Voltage at forward current 2.0A Rating for fusing (t<8.3ms) If(av) 4.0 3.0 A Ifsm 150 A Vf 1.0 V I2t 93 A2Sec Typical thermal resistance per leg Rth(ja) Rth(jl) 5.0 500 47 10 Storage and Operation Junction Temperature Tj, Tstg -55 to +150 Maximum DC Reverse Current at rated DC blocking voltage Ta =25°C Ta =125°C Ir µA ℃/W ℃ Note: 1. Unit mounted on 3.0 x 3.0 x 0.11" thick (7.5 x 7.5 x 0.3 cm) Aluminum plate 2. Unit mounted on P.C.B. at 0.375" (9.5mm) lead length and 0.5 x 0.5"(12 x 12mm) copper pads Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES G2SB460-E THRU G2SB480-E Rev.A1 www.gulfsemi.com