P300A thru P300M General Purpose Plastic Rectifiers Reverse Voltage 50 to 1000 Volts Forward Current 3.0 Amperes Features Plastic package has Underwriters Laboratories Flammability Classification 94V-0 High surge current capability Typical IR less than 0.1uA Construction utilizes void-free molded plastic technique 3.0 Amperes operation at TA=90oC with no thermal runaway High temperature soldering guaranteed: 250oC/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension TJ is 150oC (Max.) and TSTG is 175oC (Max.) with PI glue Mechanical Data Case: JEDEC DO-201AD, molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.04 ounce, 1.1 grams Maximum Ratings and Electrical Characteristics Ratings at 25oC ambient temperature unless otherwise specified. Parameter Symbols P 300A P 300B P 300D P 300G P 300J P 300K P 300M Units Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage V DC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55oC IF(AV) 3.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 200.0 Amps Maximum instantaneous forward voltage at 3.0A VF 1.2 Volts IR 5.0 25 uA trr 1.0 us pF Maximum DC reverse current at rated DC blocking voltage TA=25oC TA=100oC Typical reverse recovery time at IF=0.5A, IR=1.0A, Irr=0.25A Typical junction capacitance at 4.0V, 1MHz Typical thermal resistance (Note 1) Operating junction temperature range Storage temperature range Notes: CJ 30 RθJA RθJL 20.0 5.0 TJ -55 to +125 o C TSTG -55 to +150 o C o C/W 1. Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted with 0.8" x 0.8" (20 x 20mm) copper heatsinks 65 RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) 66