SPEC NO: MF-PO-S-0001 Proprietary Information REV: 14.0 PAGE 3 OF 9 TITLE: TAPE AND REEL PACKAGE SPECIFICATION 编带卷盘产品封装规范 1. PURPOSE 目的 1.1. The document specifies the Tape & Reel packaging for surface mount products. These packages conform to EIA-481-1/2/3, JEDEC and IEC60286-3 standards. All products are lead scanned and co-planarity checked by 3D imaging. 本文件规定贴片产品的编带卷盘封装规范。封装符合 EIA-481-1/2/3 ，JEDEC 和 IEC60286-3 标准。所有产品都通过铅扫描，并使用三维成像进行共面性检查。 2. SCOPE 范围 2.1. This specification applies to all MPS devices. 本规范适用于所有 MPS 产品。 3. Table of Standard Tape and Reel Configurations 标准编带卷盘封装规范 Package Description 封装 Part Number 产品号 MP####xH-Z MP####xK-Z MP####xP-Z MP####xP-Z MP####XP-Z MP####QD-Z MP####xQG-Z MP####QH-Z MP####xQF-Z MP####xG-Z MP####xD-Z MP####xQA-Z MP####xD-Z MP####xQ-Z MP####xL-Z MP####xQV-Z MP####xR-Z MP####xV-Z MP####xQW-Z MP####x V-Z MP####xU-Z MP####xQJ-Z MP####xQX-z MP####xQK-Z MP####xQN-Z MP####x E-Z MP####x S-Z MSOP8/10 w/Exposed Pad MSOP8/10 PDIP8 PDIP16 PDIP8 w/Exposed Pad QFN 1.0x1.5 QFN 1.4x1.8 QFN 1.5x2.0 QFN 1.6x1.2 QFN 2x2 QFN 2x3 QFN 2.2X2.6 QFN 3x2 QFN 3x3 QFN 3x4 QFN 3x5 QFN 4x4 QFN 4x5 QFN 4x6 QFN 5x4 QFN 5x5 QFN 5x6 QFN 5x8 QFN 6x6 QFN 7x7 SC70 SOD123 Quantity /Reel 每盘数量 Quantity /Rail* 2500 2500 N/A N/A N/A 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 2500 2500 2500 2500 3000 3000 50 50 50 25 50 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Carrier Reel Tape Carrier Diameter Width Tape Pitch 卷盘直径 载带宽度 载带线距 13 in. 13 in. N/A N/A N/A 13 in. 13 in. 13 in. 13 in. 13 in. 13 in. 13 in. 13 in. 13 in. 13 in. 13 in. 13 in. 13 in. 13 in. 13 in. 13 in. 13 in. 13 in 13 in. 13 in. 7 in. 7 in. 12 mm 12 mm N/A N/A N/A 8 mm 8 mm 8 mm 8 mm 12 mm 12 mm 12 mm 12 mm 12 mm 12 mm 12 mm 12 mm 12 mm 12 mm 12 mm 12 mm 12 mm 16 mm 12 mm 16 mm 8 mm 8 mm 8 mm 8 mm N/A N/A N/A 4 mm 4 mm 4 mm 4 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 12 mm 4 mm 4 mm DO NOT COPY WITHOUT WRITTEN PERMISSION FROM MONOLITHIC POWER SYSTEMS QA-DC-F-0003 rev 5.0 02/17/2012 SPEC NO: MF-PO-S-0001 Proprietary Information PAGE 4 OF 9 TITLE: TAPE AND REEL PACKAGE SPECIFICATION 编带卷盘产品封装规范 Package Description 封装 Part Number 产品号 REV: 14.0 Quantity /Reel 每盘数量 Quantity /Rail* Carrier Reel Tape Carrier Diameter Width Tape Pitch 卷盘直径 载带宽度 载带线距 MP####xS-Z MP####xN-Z MP####xS-Z MP####xS-Z MP####xN-Z MP####xY-Z MP####xY-Z SOIC8 (Narrow Body) SOIC8 w/Exposed Pad (Narrow Body) SOIC14 (Narrow Body) SOIC16 (Narrow Body) SOIC16 w/Exposed Pad (Narrow Body) SOIC18 (Wide Body) SOIC20 (Wide Body) 2500 2500 2500 2500 2500 1000 1000 100 100 50 50 50 40 37 13 in. 13 in. 13 in. 13 in. 13 in. 13 in. 13 in. 12 mm 12 mm 16 mm 16 mm 16 mm 24 mm 24 mm 8 mm 8 mm 8 mm 8 mm 8 mm 12 mm 12 mm MP####xWR-Z SOIC24 w/Heat Slug and Reverse Lead Bend (Wide Body) 1000 31 13 in. 24 mm 12 mm MP####xY-Z MP####xT-Z MP####xJ-Z MP####xE-Z MP####xM-Z MP####xM-Z SOIC28 (Wide Body) SOT23-3/5/6/8 TSOT23-5/6/8 SC70-5 TSSOP8 TSSOP14/16 1000 3000 3000 3000 2500 2500 MP####xF-Z MP####xM-Z MP####xF-Z MP####xM-Z MP####xF-Z MP####xFR-Z MP####xZ-Z MP####xC-Z MP####xC-Z MP####xC-Z MP####xC-Z MP####xC-Z TSSOP16 w/Exposed Pad TSSOP20 TSSOP20 w/Exposed Pad TSSOP28 TSSOP28 w/Exposed Pad TSSOP38 w/Exposed Pad, Reverse Lead Bend TO220 WLCSP 0.8x0.8 WLCSP 1.0x1.5 WLCSP 1.5x1.5 WLCSP 1.6x2.0 WLCSP 0.8x1.6 2500 2500 2500 2500 2500 2500 N/A 3000 3000 3000 3000 3000 27 N/A N/A N/A 100 95 95 75 75 50 50 31 50 N/A N/A N/A N/A N/A 13 in. 7 in. 7 in. 7 in. 13 in. 13 in. 13 in. 13 in. 13 in. 13 in. 13 in. 13 in. N/A 7in. 7in. 7in. 7 in 7 in 24 mm 8 mm 8 mm 8 mm 12 mm 16 mm 16 mm 16 mm 16 mm 16 mm 16 mm 16 mm N/A 8 mm 8 mm 8 mm 8 mm 8 mm 12 mm 4 mm 4 mm 4 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm N/A 4 mm 4 mm 4 mm 4 mm 4 mm * N/A indicates “not available” in rails. For 500 piece tape & reel prototype quantities, see factory. (Order code for 500 piece partial reel is “-P”, tape & reel dimensions same as full reel.) Rail 栏的N/A 表示该产品不适合用Tube 出货。对于每卷500 个的编带&卷盘，参见工厂规范。（针对500每卷的订单 编号.应带后缀-P，外观尺寸与整卷出货一致） DO NOT COPY WITHOUT WRITTEN PERMISSION FROM MONOLITHIC POWER SYSTEMS QA-DC-F-0003 rev 5.0 02/17/2012 SPEC NO: MF-PO-S-0001 Proprietary Information REV: 14.0 PAGE 5 OF 9 TITLE: TAPE AND REEL PACKAGE SPECIFICATION 编带卷盘产品封装规范 4. Table of Module Tape and Reel Configurations 模块产品编带卷盘封装规范 Part Number 产品号 Module Package Description 模块产品封装规范 Quantity /Reel 每盘数量 Quantity /Rail* Carrier Reel Tape Carrier Diameter Width Tape Pitch 卷盘直径 载带宽度 载带线距 MPM####xQB-Z MPM QFN2.5x3.0x0.9 5000 N/A 13 in. 12 mm 8 mm MPM####xQV-Z MPM QFN3.0x5.0x1.6 2500 N/A 13 in. 12 mm 8 mm DO NOT COPY WITHOUT WRITTEN PERMISSION FROM MONOLITHIC POWER SYSTEMS QA-DC-F-0003 rev 5.0 02/17/2012 SPEC NO: MF-PO-S-0001 Proprietary Information REV: 14.0 PAGE 6 OF 9 TITLE: TAPE AND REEL PACKAGE SPECIFICATION 编带卷盘产品封装规范 Pin 1 Orientation by Package Type • SOIC, TSSOP and MSOP • QFN Packages Pin 1 • 1 1 ABCD 1 1 ABCD 1 1 1 ABCD SOT23, TSOT23 & SC70 Packages 5. Partial Reels 非完整卷盘 5.1. MPS may offer partial reel with only 500 units in the reel. MPS 会提供只含 500 颗产品的非完整卷盘。 5.2. The reel size of partial reel will be the same as standard Tape and Reel, as exhibited on the item 3.0 table. However, the reel size of partial reel of QFN packages shipped out from MPS/USA might be 7”. 非完整卷盘的尺寸与 3.0 表中的标准的 T&R 一样，然而，从 MPS/USA 出货的 QFN 封装 的非完整卷盘的尺寸可能是 7”. DO NOT COPY WITHOUT WRITTEN PERMISSION FROM MONOLITHIC POWER SYSTEMS QA-DC-F-0003 rev 5.0 02/17/2012