EXTERNAL CAGE ® Liquid Displacer Level Switches DESCRIPTION Standard & tailor made designs External cage type level switches are completely self-contained units designed for side mounting to a tank or vessel with threaded or flanged pipe connections. These switches are engineered to customer specifications. F E AT U R E S • Carbon or stainless steel welded float cages (other materials available at request) • Process temperature up to 260 °C (500 °F) • Single switch level • Standard anti corrosive protection Flanged cages: - Removable sensing unit from cage allows easy maintenance - Specific gravity as low as 0,40 - Process pressure up to 345 bar (5000 psi) Sealed cages: - Sensing unit and cage are self-containing - Specific gravity as low as 0,40 - Process pressure up to 345 bar (5000 psi) Optional: - NACE construction (MR-01-75) - Interface calibration - Customized installation dimensions - Special actuating levels - Code compliance construction - Special tank connections - Class 1, Group B explosion proof electrical enclosure - Special exterior surface preparation and finish Sealed cage with flanged process connection Flanged cage with flanged process connection A G E N C Y A P P R O VA L S Agency Approval ATEX II 2G EEx d II C T6, explosion proof II 1G EEx ia II C T6, intrinsically safe CENELEC CCE ➀ EEx d II C T6, explosion proof FM Class I, Div. 1, Groups C & D Class II, Div. 1, Groups E, F & G, Type NEMA 7/9 Non-Hazardous area FM/CSA ➁ Explosion proof area – Groups B, C, D, E, F & G Type NEMA 4X/7/9 A P P L I C AT I O N S • • • • Foaming or surging liquids Agitated fluids Sewage handling Dirty liquids R1 (1) 136/MI/433, explosion proof • • • • Paints Varnishes Heavy oils Liquids with solids SAA ➁ LRS Explosion proof area Lloyds Register of Shipment (marine applications) GOST/ GOSGORTECHNADZOR ➁ Russian Authorisation Standards Other approvals are available, consult factory for more details ➀ For CCE approved units, use the ATEX explosion proof model numbers. ➁ Consult factory for proper model numbers. Worldwide level and flow solutions P R I N C I P L E O F O P E R AT I O N The displacer A , which is heavier than the liquid, rests its weight on a spring. Rising liquid level imparts buoyancy to the displacer allowing the spring to move upward. The attraction sleeve B , attached to the spring, moves upward into the field of a permanent magnet C . Magnet motion tilts the switch D for actuation. A non-magnetic barrier tube E provides a static seal between the switch mechanism and the displacer assembly. D 4 5 D 6 4 6 C C B 5 B E A A MOUNTING Sealed Cages Flanged Cages H13 - H31 - H51 N15 - N32 - N52 H13 - H31 - H51 N15 - N32 - N52 EXPEDITE SHIP PLAN (ESP) Several mechanical switches are available for quick shipment, within max. 3 weeks after factory receipt of purchase order, through the Expedite Ship Plan (ESP). Models covered by ESP service are conveniently grey coded in the selection data charts. To take advantage of ESP, simply match the grey coded model number codes (standard dimensions apply). ESP service may not apply to orders of ten units or more. Contact your local representative for lead times on larger volume orders, as well as other products and options. 2 AVA I L A B L E S W I T C H M E C H A N I S M S Type of switch module ➀ Max. Process Temp. ➁ Switch ratings – A res. ➂ Code 24 V DC 240 V AC 120 V AC ➀ ➁ ➂ ➃ Micro switch max 120 °C (250 °F) 6 15 15 B Micro switch max 230 °C (450 °F) 10 Micro switch - DC current max 120 °C (250 °F) 10 15 15 C – 10 D Micro switch with gold alloy contacts max 120 °C (250 °F) Hermetically sealed micro switch max 260 °C (500 °F) 1 – 1 U 5 5 5 HS ➃ Hermetically sealed micro switch with silver plated contacts max 230 °C (450 °F) 3 Hermetically sealed micro switch with gold plated contacts max 230 °C (450 °F) 0,5 1 1 W 0,5 0,5 X Proximity switch - type SJ 3.5 SN max 100 °C (210 °F) NA NA NA V Mercury switch max 260 °C (500 °F) 10 6,5 13 A Pneumatic bleed type (open air) max 200 °C (400 °F) NA NA NA J Pneumatic non bleed type (closed circuit) max 200 °C (400 °F) NA NA NA K For applications with heavy vibration, consult factory for suited switch modules. Max process temperature is specified at 40 °C (100 °F) ambient temperature and for non condensing applications. For more details - see bulletin BE 42-120. For condensing applications, max process temperature is down-rated to 200 °C (400 °F) @ 40 °C (100 °F) ambient. Type B, C, D & U Type HS Type W & X Type V Type A Type J & K AVA I L A B L E H O U S I N G S • • • • • For Non Ex use IP 66 Die cast Aluminium 2 Entries (one plugged) Standard blue anti corrosive coating • Housing heater/drain available, consult factory • • • • • For Exd/Exi use IP 66 Die cast Aluminium 2 Entries (one plugged) Standard blue anti corrosive coating • ATEX II 2G EEx d II C T6 • ATEX II 1G EEx ia II C T6 • • • • For Exd use IP 66 Cast Iron One entry (2 entries at request) • Standard blue anti corrosive coating • CENELEC EEx d II C T6 • • • • For pneumatic switches IP 53 (NEMA 3R) IP 55 optional at request Alu base / cold rolled steel cover • Standard blue anti corrosive coating • • • • • For Exd use IP 66 (NEMA 7/9) Die cast Aluminium 2 Entries (one plugged) Standard blue anti corrosive coating • FM, Class I, Div. 1, Groups C & D • FM, Class II, Div. 1, Groups E, F & G 3 S E L E C T I O N D ATA Specific gravity and pressure limits – as per selected material of construction (see right page) Sealed Cages Process Temp °C (°F) Model Number Carbon steel cages Stainless steel cages Min. S.G. Min. S.G. Pressure bar (psi) Material code A & B 40 (100) H13 150 (300) - 96,5 (1400) 0,40 Process Temp °C (°F) 103 (1500) N15 150 lbs rating 150 (300) 96,5 (1400) 82,7 (1200) - - - - - - - - - - - - - - - - - 40 (100) 207 (3000) 207 (3000) 0,40 196 (2848) 0,40 196 (2848) Min. S.G. Pressure bar (psi) Material code A & B 11,7 (170) 40 (100) 51,0 (740) 0,40 33,1 (480) 99,3 (1440) 0,40 90,6 (1315) 65,8 (955) 40 (100) 207 (3000) 207 (3000) 0,40 196 (2848) 345 (5000) 345 (5000) 40 (100) 345 (5000) 310 (4500) 150 (300) 310 (4500) 77,2 (1120) 82,7 (1200) 40 (100) 200 (400) 0,40 260 (500) 150 (300) N52 38,6 (560) 102 (1480) 193 (2800) 345 (5000) 49,6 (720) 0,40 40 (100) 200 (400) 0,40 11,7 (170) 41,4 (600) 193 (2800) 345 (5000) 14,8 (215) 260 (500) 193 (2800) 0,40 0,40 45,2 (655) 200 (400) 150 (300) 19,0 (275) 15,9 (230) 260 (500) 150 (300) N32 Pressure bar (psi) Material code D 19,6 (285) 0,40 150 (300) N15 600 lbs rating - Stainless steel cages Min. S.G. 40 (100) N15 300 lbs rating - - 150 (300) H51 0,40 Model Number 82,7 (1200) - H31 103 (1500) Carbon steel cages Pressure bar (psi) 260 (500) - - Material code D Flanged Cages 0,40 0,40 177 (2570) 345 (5000) 345 (5000) 200 (400) 192 (2795) 0,40 321 (4660) 310 (4500) 295 (4280) A complete measuring system consists of: 1. Order code for caged models (each unit can be factory calibrated when specific level differentials are specified separately). 2. Order code for modified models or adders: put an "X" in front of the closest matching order code and specify the modifications/adders separately eg. XN15-AB20-AAQ X = with material certification EN 10204 / DIN 50049-3.1.B Select pneumatic switch mechanism & enclosure Pneumatic switch type Max supply pressure bar (psi) Max liquid temperature °C (°F) Bleed orifice Ø mm (inches) Series J (open air) 6,9 (100) 4,1 (60) 200 (400) 200 (400) 1,60 (0.063) 2,39 (0.094) Series K (closed circuit) 6,9 (100) 200 (400) – NEMA 3R (IP 53) material code A ➀ material codes B & D ➁ JDE JKE JEE JLE KOE KPE Select electric switch mechanism & enclosure: see page 3 for switch ratings qty and switch type A B C D HS ➀ ➂ U V W X Weather proof (IP 66) CENELEC (IP 66) FM (IP 66) II 2G EEx d II C T6 II 1G EEx ia II C T6 EEx d II C T6 NEMA 7/9 cast Aluminium cast Aluminium cast Aluminium cast Iron cast Alu. M20 x 1,5 1" NPT M20 x 1,5 1" NPT M20 x 1,5 1" NPT M20 x 1,5 3/4" NPT 1 x SPDT A2Q AAQ AH9 AA9 – – AK5 AU5 AKQ 1 x DPDT A8Q ADQ AJ9 AB9 – – AD5 AW5 ANQ 1" NPT 1 x SPDT B2Q BAQ BH9 BA9 – – BK5 BU5 BKQ 1 x DPDT B8Q BDQ BJ9 BB9 – – BD5 BW5 BNQ 1 x SPDT C2Q CAQ CH9 CA9 C2S CAS CK5 CU5 CKQ 1 x DPDT C8Q CDQ CJ9 CB9 C8S CDS CD5 CW5 CNQ 1 x SPDT D2Q DAQ DH9 DA9 – – DK5 DU5 DKQ 1 x DPDT D8Q DDQ DJ9 DB9 – – DD5 DW5 DNQ HM3 1 x SPDT H7A HM2 HFC HA9 – – HB3 HB4 1 x DPDT H7C HM6 HGC HB9 – – HB7 HB8 HM7 1 x SPDT U2Q UAQ UH9 UA9 U2S UAS UK5 UU5 UKQ 1 x DPDT U8Q UDQ UJ9 UB9 U8S UDS UD5 UW5 UNQ – – – – – V5S VBS – – – 1 x SPDT W2Q WAQ WH9 WA9 W2S WAS WK5 WU5 WKQ 1 x DPDT W8Q WDQ WJ9 WB9 W8S WDS WD5 WW5 WNQ 1 x SPDT X2Q XAQ XH9 XA9 X2S XAS XK5 XU5 XKQ 1 x DPDT X8Q XDQ XJ9 XB9 X8S XDS XD5 XW5 XNQ ➀ For all models except H51/N52 ➁ For all models incl. H51/N52 with material code A ➂ Only in combination with material code A 4 ATEX (IP 66) S E L E C T I O N D ATA 1. Order code for liquid float level switches in an external cage BASIC MODEL NUMBER1 – Sealed cages H 1 3 H 3 1 H 5 1 down to S.G. 0,4 down to S.G. 0,4 down to S.G. 0,4 up to 103 bar (1500 psi) up to 207 bar (3000 psi) up to 345 bar (5000 psi) max pressure varies per material of construction and temperature - select as per table on left page - up to 102 bar (1480 psi) up to 207 bar (3000 psi) up to 345 bar (5000 psi) max pressure varies per material of construction and temperature - select as per table on left page - – Flanged cages down to S.G. 0,4 down to S.G. 0,4 down to S.G. 0,4 MATERIALS OF CONSTRUCTION Code N 1 5 N 3 2 N 5 2 A B D Cage & process connection material Displacer and trim Magnetic sleeve 400 series SST Carbon steel 316 SST (1.4401) 316/316L (1.4401/1.4404) 316 SST (1.4401) PROCESS CONNECTION Threaded NPT connection upper side / bottom side / side All models For models N15 For models N15 except N15 150 lbs 300 lbs 600 lbs ≤ 2500 lbs 150 lbs 300 lbs 600 lbs 1" B21 B23 B20 B20 B41 B43 B40 11/2" C21 C23 C20 C20 C41 C43 C40 2" D21 D23 D20 D20 D41 D43 D40 Socket weld connection upper side / bottom side / side All models For models N15 For models N15 except N15 150 lbs 300 lbs 600 lbs ≤ 2500 lbs 150 lbs 300 lbs 600 lbs 1" B31 B33 B30 B30 B51 B53 B50 11/2" C31 C33 C30 C30 C51 C53 C50 2" D31 D33 D30 D30 D51 D53 D50 ANSI Flanges upper side / bottom side / side For models H13/N15 For models H13/N15 150 lbs RF 300 lbs RF 600 lbs RF 600 lbs RJ 150 lbs RF 300 lbs RF 600 lbs RF 1" N30 N40 N50 N60 S30 S40 S50 11/2" P30 P40 P50 P60 T30 T40 T50 2" Q30 Q40 Q50 Q60 V30 V40 V50 For models For models H31/N32 For models For models For models H31/N32 H31/N32 & H51/N52 H51/N52 H31/N32 & H51/N52 900 lbs RJ 1500 lbs RJ 2500 lbs RJ 900 lbs RJ 1500 lbs RJ 1" N70 N80 N90 S70 S80 11/2" P70 P80 P90 T70 T80 2" Q70 Q80 Q90 V70 V80 DIN Flanges - Form to DIN 2526 upper side / bottom side / side For models H13/N15 For models H13/N15 PN 16 (DIN 2633) PN 25/40 (DIN 2635) PN 64 (DIN 2636) PN 100 (DIN 2637) PN 16 (DIN 2633) PN 25/40 (DIN 2635) PN 64 (DIN 2636) Form C Form C Form E Form E Form C Form C Form E DN 25 1FA 1HA 1JA 1KA 1FB 1HB 1JB DN 40 2FA 2HA 2JA 2KA 2FB 2HB 2JB DN 50 3FA 3HA 3JA 3KA 3FB 3HB 3JB All models except N15 ≤ 2500 lbs B40 C40 D40 All models except N15 ≤ 2500 lbs B50 C50 D50 600 lbs RJ S60 T60 V60 For models H51/N52 2500 lbs RJ S90 T90 V90 PN 100 (DIN 2637) Form E 1KB 2KB 3KB SWITCH MECHANISM & ENCLOSURE (see left page) complete order code for caged models 5 P H Y S I C A L S P E C I F I C AT I O N S Description Specification Measured variable Liquid level / interface level Physical range Standard models: min S.G. 0,40 Process temperature Process pressure (for higher ratings consult factory) Up to 345 bar (5000 psi) @ 40 °C (100 °F) Up to 260 °C (500 °F) @ 82,7 bar (1200 psi) Cage and process connection material Carbon steel or stainless steel (others at request) Wetted materials Displacer and trim 316 SST (1.4401) Magnetic sleeve 316 SST (1.4401), or 400 series SST Spring Inconel E L E C T R I C A L S P E C I F I C AT I O N S Description Specification Switch ratings Up to 15 A @ 240 V AC (depending on switch mechanism) Up to 10 A @ 120 V DC (depending on switch mechanism) Signal Output Single SPDT or DPDT contacts or single pneumatic Switch Types (see table on page 3) Dry contact with standard or gold alloy contacts, Mercury, Hermetically sealed, Hermetically sealed with gold or silver plated contacts, Proximity switch, or single pneumatic bleed and non bleed Approvals (see table on page 1) ATEX II 2G EEx d II C T6, explosion proof ATEX II 1G EEx ia II C T6, intrinsically safe CENELEC EEx d II C T6, explosion proof FM/CSA/SAA, explosion proof LRS, Lloyds Register of Shipment (marine applications) GOST/GOSGORTECHNADZOR, Russian Authorisation standards Other approvals are available, consult factory. Cable entries M20 x 1,5 ISO, 1" NPT and 3/4" NPT (or others at request) ELECTRICAL CONNECTION Safe area Hazardous area Safe area Hazardous area I.S. Power Relay Power A C T U AT I N G L E V E L S HL LL Upper side / bottom NPT & Socket weld 6 HL LL Side / Side NPT & Socket weld HL LL Upper side / bottom Flanged HL LL Side / Side Flanged SEALED CAGE MODEL - dimensional specifications in mm (inches) – H13 / H31 / H51 Models – X X X Y Y Z Z X Y Y Z Z V V V W W V W C W C A A C A C A 133 (5.24) 133 (5.24) B B B B Threaded & socket weld upper side/bottom aluminium housing Flanged upper side/bottom aluminium housing Threaded & socket weld side/side aluminium housing Flanged side/side aluminium housing – N15 / N32 / N52 Models – X Y Y Y Z X X X Y Z Z Z V W V V V W W W C C C A A C 133 (5.24) B A A B 133 (5.24) B B Threaded & socket weld upper side/bottom cast iron housing Flanged upper side/bottom cast iron housing Threaded & socket weld side/side cast iron housing Housing type Models WeatherproofFM (NEMA 7/9) ATEX (Cast Alu) CENELEC (Cast Iron) V W mm inches Models with HS-switch 257 10.12 Models excl. HS-switch 202 7.94 All 249 All 165 Pneumatics Switch Module J Pneumatics Switch Module K Flanged side/side cast iron housing øX Y Z mm inches mm inches mm inches 42 1.66 151 5.93 109 4.29 M20 x 1,5 (*) or 1" NPT (2 entries - 1 plugged) (*) not for FM (NEMA 7/9) 9.80 45 1.77 143 5.63 110 4.33 M20 x 1,5 or 3/4" NPT (single entry - 2 entries at request) 110 4.33 6.50 39 1.54 118 4.65 130 5.12 1/4" NPT Allow 200 mm (7.87") overhead clearance / All housings are 360 ° rotatable ACTUATING LEVELS IN mm (inches) FOR DIFFERENT SPECIFIC GRAVITIES S.G. 0,4 0,5 0,6 0,7 0,8 0,9 1,0 1,1 High Level (HL) 96 (3.78) 126 (4.96) 147 (5.79) 161 (6.34) 172 (6.77) 181 (7.13) 187 (7.36) 193 (7.60) Low Level (LL) 198 (7.80) 211 (8.31) 219 (8.62) 225 (8.86) 229 (9.02) 233 (9.17) 236 (9.29) 238 (9.37) 7 DIMENSIONS in mm (inches) Process connection size 1" - DN 25 1 1/2" - DN 40 2" - DN 50 1" - DN 25 1 1/2" - DN 40 2" - DN 50 1" - DN 25 1 1/2" - DN 40 2" - DN 50 Mounting configuration threaded/socket welded upper side/bottom threaded/socket welded side/side flanged upper side/bottom flanged side/side threaded/socket welded upper side/bottom threaded/socket welded side/side flanged upper side/bottom flanged side/side threaded/socket welded upper side/bottom threaded/socket welded side/side flanged upper side/bottom flanged side/side threaded upper side/bottom threaded side/side socket welded upper side/bottom socket welded side/side flanged upper side/bottom flanged side/side threaded upper side/bottom threaded side/side socket welded upper side/bottom socket welded side/side flanged upper side/bottom flanged side/side threaded upper side/bottom threaded side/side socket welded upper side/bottom socket welded side/side flanged upper side/bottom flanged side/side threaded/socket welded upper side/bottom threaded/socket welded side/side flanged 1500 lbs RJ upper side/bottom flanged 1500 lbs RJ side/side flanged 2500 lbs RJ upper side/bottom flanged 2500 lbs RJ side/side threaded/socket welded upper side/bottom threaded/socket welded side/side flanged 1500 lbs RJ upper side/bottom flanged 1500 lbs RJ side/side flanged 2500 lbs RJ upper side/bottom flanged 2500 lbs RJ side/side threaded/socket welded upper side/bottom threaded/socket welded side/side flanged 1500 lbs RJ upper side/bottom flanged 1500 lbs RJ side/side flanged 2500 lbs RJ upper side/bottom flanged 2500 lbs RJ side/side mm 425 292 550 292 425 292 560 292 425 292 565 292 inches 16.73 11.50 21.65 11.50 16.73 11.50 22.05 11.50 16.73 11.50 22.24 11.50 Dimensions B mm inches 69 2.72 69 2.72 170 6.69 170 6.69 81 3.19 81 3.19 180 7.09 180 7.09 84 3.31 84 3.31 185 7.28 185 7.28 H31 425 292 425 292 565 292 425 292 425 292 575 292 425 292 425 292 595 292 16.73 11.50 16.73 11.50 22.24 11.50 16.73 11.50 16.73 11.50 22.64 11.50 16.73 11.50 16.73 11.50 23.43 11.50 92 92 99 99 195 195 94 94 102 102 205 205 97 97 112 112 225 225 3.62 3.62 3.90 3.90 7.68 7.68 3.70 3.70 4.02 4.02 8.07 8.07 3.82 3.82 4.41 4.41 8.86 8.86 630 630 630 630 770 630 630 630 630 630 780 630 630 630 630 630 800 630 24.80 24.80 24.80 24.80 30.31 24.80 24.80 24.80 24.80 24.80 30.71 24.80 24.80 24.80 24.80 24.80 31.50 24.80 H51 425 292 565 292 580 292 425 292 575 292 605 292 425 292 595 292 620 292 16.73 11.50 22.24 11.50 22.83 11.50 16.73 11.50 22.64 11.50 23.82 11.50 16.73 11.50 23.43 11.50 24.41 11.50 99 99 195 195 211 211 102 102 205 205 235 235 112 112 225 225 250 250 3.90 3.90 7.68 7.68 8.31 8.31 4.02 4.02 8.07 8.07 9.25 9.25 4.41 4.41 8.86 8.86 9.84 9.84 630 630 770 630 785 630 630 630 780 630 810 630 630 630 800 630 825 630 24.80 24.80 30.31 24.80 30.91 24.80 24.80 24.80 30.71 24.80 31.89 24.80 24.80 24.80 31.50 24.80 32.48 24.80 Model H13 A C mm 425 292 550 292 425 292 560 292 425 292 565 292 inches 16.73 11.50 21.65 11.50 16.73 11.50 22.05 11.50 16.73 11.50 22.24 11.50 Dimensions B mm inches 69 2.72 69 2.72 170 6.69 170 6.69 81 3.19 81 3.19 180 7.09 180 7.09 84 3.31 84 3.31 185 7.28 185 7.28 N32 (**) 425 292 425 292 565 292 425 292 425 292 575 292 425 292 425 292 595 292 16.73 11.50 16.73 11.50 22.24 11.50 16.73 11.50 16.73 11.50 22.64 11.50 16.73 11.50 16.73 11.50 23.43 11.50 92 92 99 99 195 195 94 94 102 102 205 205 97 97 112 112 225 225 3.62 3.62 3.90 3.90 7.68 7.68 3.70 3.70 4.02 4.02 8.07 8.07 3.82 3.82 4.41 4.41 8.86 8.86 735 735 735 735 875 735 735 735 735 735 885 735 735 735 735 735 905 735 28.94 28.94 28.94 28.94 34.45 28.94 28.94 28.94 28.94 28.94 34.84 28.94 28.94 28.94 28.94 28.94 35.63 28.94 N52 (**) 425 292 565 292 580 292 425 292 575 292 605 292 425 292 595 292 620 292 16.73 11.50 22.24 11.50 22.83 11.50 16.73 11.50 22.64 11.50 23.82 11.50 16.73 11.50 23.43 11.50 24.41 11.50 99 99 195 195 211 211 102 102 205 205 235 235 112 112 225 225 250 250 3.90 3.90 7.68 7.68 8.31 8.31 4.02 4.02 8.07 8.07 9.25 9.25 4.41 4.41 8.86 8.86 9.84 9.84 835 835 975 835 990 835 835 835 985 835 1015 835 835 835 1005 835 1030 835 32.87 32.87 38.39 32.87 38.98 32.87 32.87 32.87 38.78 32.87 39.96 32.87 32.87 32.87 39.57 32.87 40.55 32.87 Model mm 623 623 748 623 623 623 758 623 623 623 763 623 inches 24.53 24.53 29.45 24.53 24.53 24.53 29.84 24.53 24.53 24.53 30.04 24.53 N15 (*) A C mm 630 630 755 630 630 630 765 630 630 630 770 630 inches 24.80 24.80 29.72 24.80 24.80 24.80 30.12 24.80 24.80 24.80 30.31 24.80 (*) Add 33 mm (1.3") to ‘C’-dimension for cast iron EEx d II C T6 housings (**) Add 51 mm (2") to ‘C’-dimension for cast iron EEx d II C T6 housings QUALITY ASSURANCE - ISO 9001 THE QUALITY ASSURANCE SYSTEM IN PLACE AT MAGNETROL GUARANTEES THE HIGHEST LEVEL OF QUALITY DURING THE DESIGN, THE CONSTRUCTION AND THE SERVICE OF CONTROLS. OUR QUALITY ASSURANCE SYSTEM IS APPROVED AND CERTIFIED TO ISO 9001 AND OUR TOTAL COMPANY IS COMMITTED TO PROVIDING FULL CUSTOMER SATISFACTION BOTH IN QUALITY PRODUCTS AND QUALITY SERVICE. PRODUCT WARRANTY ALL MAGNETROL MECHANICAL LEVEL CONTROLS ARE WARRANTED FREE OF DEFECTS IN MATERIALS AND WORKMANSHIP FOR FIVE FULL YEARS FROM THE DATE OF ORIGINAL FACTORY SHIPMENT. IF RETURNED WITHIN THE WARRANTY PERIOD; AND, UPON FACTORY INSPECTION OF THE CONTROL, THE CAUSE OF THE CLAIM IS DETERMINED TO BE COVERED UNDER THE WARRANTY; THEN, MAGNETROL INTERNATIONAL WILL REPAIR OR REPLACE THE CONTROL AT NO COST TO THE PURCHASER (OR OWNER) OTHER THAN TRANSPORTATION. MAGNETROL SHALL NOT BE LIABLE FOR MISAPPLICATION, LABOR CLAIMS, DIRECT OR CONSEQUENTIAL DAMAGE OR EXPENSE ARISING FROM THE INSTALLATION OR USE OF THE EQUIPMENT. THERE ARE NO OTHER WARRANTIES EXPRESSED OR IMPLIED, EXCEPT, SPECIAL WRITTEN WARRANTIES COVERING SOME MAGNETROL PRODUCTS. BULLETIN N°: EFFECTIVE: SUPERSEDES: UNDER RESERVE OF MODIFICATIONS Heikensstraat 6, 9240 Zele, België Tel. +32 (0)52.45.11.11 • Fax. +32 (0)52.45.09.93 • E-Mail: [email protected] DEUTSCHLAND Schloßstraße 76, D-51429 Bergisch Gladbach-Bensberg Tel. 02204 / 9536-0 • Fax. 02204 / 9536-53 • E-Mail: [email protected] FRANCE Le Vinci 6 - Parc d’activités de Mitry Compans, 1, rue Becquerel, 77290 Mitry Mory Tél. 01.60.93.99.50 • Fax. 01.60.93.99.51 • E-Mail: [email protected] ITALIA Via Arese 12, I-20159 Milano Tel. (02) 607.22.98 (R.A.) • Fax. (02) 668.66.52 • E-Mail: [email protected] UNITED KINGDOM Unit 1 Regent Business Centre, Jubilee Road Burgess Hill West Sussex RH 15 9TL Tel. (01444) 871313 • Fax (01444) 871317 • E-Mail: [email protected] INDIA B4/115 Safdurjung Enclave, New Delhi 110 029 Tel. 91 (11) 6186211 • Fax 91 (11) 6186418 • E-Mail: [email protected] www.magnetrol.com BENELUX OUR NEAREST REPRESENTATIVE BE 46-121.9 MARCH 2002 February 1996