Thick Film Chip Resistors NRCA Series FEATURES • • • • • EIA STANDARD SIZING 0402(1/16W), 0603(1/10W), 0805(1/8W), 1206(1/4W), 1210(1/2W), 2010(1/2W), 2512(1W) HIGH RELIABILITY AUTOMOTIVE GRADE AEC Q-200 QUALIFIED SULFUR RESISTANT (H2S 3PPM, 40°C, RH 90%, 1000 HOURS) BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE AVAILABLE IN ZERO OHM (JUMPER) Automotive Grade Resistors Type EIA Size Max.*1 Max.*2 Power Rating Working Overload at 70°C Voltage Voltage NRCA04 0402 1/16 (0.063) W 50V 100V NRCA06 0603 1/10 (0.10) W 75V 150V NRCA10 0805 1/8 (0.125) W 150V 300V NRCA12 1206 1/4 (0.25) W 200V 400V NRCA25 1210 1/2 (0.50) W 200V 400V NRCA50 2010 1/2 (0.50) W 200V 400V NRCA100 2512 1 (1.0) W 250V 500V NRCA04ZO NRCA06ZO NRCA10ZO NRCA12ZO NRCA25ZO NRCA50ZO NRCA100ZO 0402 0603 0805 1206 1210 2010 2512 Resistance Tolerance (Code) Temperature Resistance Resistance Coefficient Range Value (ppm/°C) (Ω) +400/-200 1.0 ~ 10 ±1% (F), ±100 10.2 ~ 1M ±5% (J) ±200 1.02M ~ 10M +400/-200 1.0 ~ 10 ±1% (F), ±100 10.2 ~ 1M ±5% (J) ±200 1.02M ~ 10M +400/-200 1.0 ~ 10 ±1% (F), ±100 10.2 ~ 1M ±5% (J) ±200 1.02M ~ 10M +400/-200 1.0 ~ 10 ±1% (F), ±100 10.2 ~ 1M E-24,E-96 ±5% (J) ±200 1.02M ~ 10M +400/-200 1.0 ~ 10 ±1% (F), ±100 10.2 ~ 1M ±5% (J) ±200 1.02M ~ 10M ±200 1.0 ~ 9.96 ±1% (F), ±100 10 ~ 1M ±5% (J) ±200 1.02M ~ 10M ±200 1.0 ~ 9.96 ±1% (F), ±100 10 ~ 1M ±5% (J) ±200 1.02M ~ 10M Rated Current 1.0A (0.05Ω max. DC Resistance) Rated Current 1.0A (0.05Ω max. DC Resistance) Rated Current 1.5A (0.05Ω max. DC Resistance) Rated Current 2.0A (0.05Ω max. DC Resistance) Rated Current 3.0A (0.05Ω max. DC Resistance) Rated Current 3.2A (0.05Ω max. DC Resistance) Rated Current 4.5A (0.05Ω max. DC Resistance) Zero Ohm Temperature Range -55°C ~ +155°C Power Derating Curve: For operation above 70°C, power rating must be derated according to the following chart: Note *1 - Maximum allowable continuous Working Voltage for all resistors is the lower of the two values: “Maximum Working Voltage” as specified above (or) 100 80 Note *2 - Maximum allowable Overload voltage is two times the Maximum Working Voltage (see Note *1 above). RATE (%) Power rating (Watts) x Resistance (Ohms) 60 40 20 0 -20 20 60 70 100 140 160 155 o C 0402/0603/0805/1206/1210/2010/2512 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 1 Thick Film Chip Resistors NRCA Series DIMENSIONS (mm) Type NRCA04 NRCA06 NRCA10 NRCA12 NRCA25 NRCA50 NRCA100 NRCA04ZO NRCA06ZO NRCA10ZO NRCA12ZO NRCA25ZO NRCA50ZO NRCA100ZO Power Rating 1/16W 1/10W 1/8W 1/4W 1/2W 1/2W 1W JUMPER JUMPER JUMPER JUMPER JUMPER JUMPER JUMPER EIA Size 0402 0603 0805 1206 1210 2010 2512 0402 0603 0805 1206 1210 2010 2512 L 1.00 ± 0.05 1.60 ± 0.10 2.00 ± 0.10 3.10 ± 0.10 3.10 ± 0.10 5.00 ± 0.20 6.40 ± 0.20 W H T t 0.50 ± 0.05 0.35 ± 0.05 0.20 ± 0.10 0.80 ± 0.10 0.45 ± 0.15 0.30 ± 0.10 1.25 ± 0.10 0.50 ± 0.15 0.40 ± 0.20 1.60 ± 0.10 0.60 ± 0.15 0.50 ± 0.20 2.60 ± 0.10 0.55 ± 0.10 0.50 ± 0.20 2.50 ± 0.20 0.55 ± 0.10 0.65 ± 0.25 3.20 ± 0.20 0.60 ± 0.10 0.65 ± 0.25 Same as NRCA04 Same as NRCA06 Same as NRCA10 Same as NRCA12 Same as NRCA25 Same as NRCA50 Same as NRCA100 0.25 ± 0.10 0.30 ± 0.15 0.40 ± 0.20 0.45 ± 0.20 0.50 ± 0.20 0.60 ± 0.25 0.90 ± 0.25 CONSTRUCTION 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Thick Film Chip Resistors NRCA Series Examples of Resistance Code: 4R7 = 4.7 ohms 100 = 10 ohms 101 = 100 ohms 102 = 1K ohms PART NUMBER SYSTEM (E-24 VALUES) NRCA12 J 103 TR 10 Q Y F RoHS compliant 103 = 10K ohms 104 = 100K ohms 105 = 1 meg ohms 106 = 10meg ohms Q = AEC Q-200 Qualified Optional 10,000 piece reel Tape & Reel Packaging Resistance Code: First 2 figures are significant, 3rd digit is the multiplier, “R” indicates a decimal point. Tolerance Code: J=5% Series and Size "Y" denotes suitable for automotive equipment, sourced to special production and inspection at TS-16949 certified production site PART NUMBER SYSTEM (E-96 VALUES) NRCA12 F 1003 TR 10 Q Y F RoHS compliant Examples of Resistance Code: 10R0 = 10 ohms 47R5 = 47.5 ohms 1000 = 100 ohms 1001 = 1K ohms 1002 = 10K ohms 1003 = 100K ohms Q = AEC Q-200 Qualified Optional 10,000 piece reel Tape & Reel Packaging Resistance Code: First 3 figures are significant, 4th digit is the multiplier, “R” indicates a decimal point. Tolerance Code: F=1% Series and Size 1004 = 1meg ohms 1050 = 105 ohms 1501 = 1.5K ohms 1052 = 10.5K ohms 1153 = 115K ohms 1214 = 1.21meg ohms "Y" denotes suitable for automotive equipment, sourced to special production and inspection at TS-16949 certified production site Marking (No marking on 0402 size). 1. For E-12 & E-24 Series (±5% = J) Tolerance In 0603, 0805, 1206 and 1210 sizes: 3 DIGIT SYSTEM - First two digits are significant and third digit is multiplier, “R” indicates decimal on values under 10 ohms. Examples: 1R0 = 1.0 ohms 102 = 1K ohms 103 = 10k ohms 101 = 100 ohms 470 = 47 ohms 104 = 100K ohms 105 = 1 Megohms 2. For E-12 & E-24 Series (±5% = J) Tolerance In 2010 and 2512 sizes: 4 DIGIT SYSTEM - First 3 digits are significant and fourth digit is multiplier, “R” indicates decimal on values under 100 ohms. Examples: 1R00 = 1.0 ohms 10R0 = 10 ohms 1003 = 100 Kohms 1000 = 100 ohms 1004 = 1 Megohms 1001 = 1K ohms 3. For E-96 Series (±1% Tolerance) in 0805, 1206, 1210, 2010 AND 2512 sizes: 4 DIGIT SYSTEM - First 3 digits are significant and fourth digit is multiplier, “R” indicates decimal on values under 100 ohms. Examples: 1R00 = 1.0 ohms 10R0 = 10 ohms 1003 = 100 Kohms 1000 = 100 ohms 1004 = 1 Megohms 1001 = 1K ohms 1052 = 10.5K ohms 1002 = 10K ohms 2213 = 221K ohms 4. For E-96 Series (±1% Tolerance) in 0603 size 3 DIGIT SYSTEM (Due to space restrictions) NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 3 Thick Film Chip Resistors NRCA Series STANDARD E-24 AND E-96 VALUES AND 0603 1% TOLERANCE RESISTANCE CODES Note: 0603 1% resistor values that are exclusive to E-24 (ex. 12K) are marked with the three character 5% tolerance code E-24 Value 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 E-96 Value Code 100 01 110 05 121 09 133 13 147 17 162 21 178 25 196 29 215 33 237 37 261 41 287 45 316 49 348 53 383 57 422 61 464 65 511 69 562 73 619 77 681 81 750 85 825 89 909 93 Value Code 102 02 113 06 124 10 137 14 150 18 165 22 182 26 200 30 221 34 243 38 267 42 294 46 324 50 357 54 392 58 432 62 475 66 523 70 576 74 634 78 698 82 768 86 845 90 931 94 Value Code 105 03 115 07 127 11 140 15 154 19 169 23 187 27 205 31 226 35 249 39 274 43 301 47 332 51 365 55 402 59 442 63 487 67 536 71 590 75 649 79 715 83 787 87 866 91 953 95 Value Code 107 04 118 08 130 12 143 16 158 20 174 24 191 28 210 32 232 36 255 40 280 44 309 48 340 52 374 56 412 60 453 64 499 68 549 72 604 76 665 80 732 84 806 88 887 92 976 96 MULTIPLIER CODE Code A B,b C D,d E F G H X Y Z Multiplier 100 101 102 103 104 105 106 107 10-1 10-2 10-3 CODING FORMULA XX Example: X 10.2kΩ = 102 x 102 Ω = 02C 02 C 33.2 Ω = 332 x 10-1 = 51X 51 X Multiplier Code Resistance Code TAPING SPECIFICATIONS (1) Carrier Material Type NRCA04 NRCA06 NRCA10 NRCA12 NRCA25 NRCA50 NRCA100 4 Power Rating 1/16W 1/10W 1/8W 1/4W 1/2W 1/2W 1W EIA Size 0402 0603 0805 1206 1210 2010 2512 Fig. A A A A A B B NIC COMPONENTS CORP. www.niccomp.com Carrier Tape Material Paper Paper Paper Paper Paper Plastic Plastic www.lowESR.com MARKING EXAMPLES 10Ω = 01X 7.5k Ω = 85B or 85b 150k Ω = 18D or 18d 1 MegΩ = 01E 0603 1% E-12/E-24 Values 160Ω = 161 12KΩ = 123 8.2MΩ = 825 Width (mm) 8 8 8 8 8 12 12 www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Thick Film Chip Resistors NRCA Series (2) PAPER TAPE DIMENSIONS (mm) FIG. A Type EIA Size A B NRCA04 0402 0.70 ± 0.10 NRCA06 0603 1.10 ± 0.20 NRCA10 0805 1.65 ± 0.20 NRCA12 1206 2.00 ± 0.20 NRCA25 1210 3.00 ± 0.20 * Same for JUMPER (ZO) types. D 1.20 ± 0.10 1.90 ± 0.20 2.40 ± 0.20 3.60 ± 0.20 3.60 ± 0.20 E 1.5 +0.1/-1 F 1.75 ± 0.1 Po 3.5 ± 0.05 P0 4.0 ± 0.1 P1 T2 2.0 ± 0.1 0.4 ± 0.05 0.65 ± 0.05 4.0 ± 0.1 W 8.0 ± 0.2 1.0 max. D E Cover tape F W B A T P1 (3) EMBOSSED PLASTIC TAPE SPECIFICATION FIG. B. Type EIA Size A B NRCA50 2010 2.80 ± 0.20 5.50 ± 0.20 NRCA100 2512 3.60 ± 0.20 6.90 ± 0.20 * Same for JUMPER (ZO) types. D E F P0 P1 T W 1.5 ± 0.1 1.75 ± 0.1 5.50 ± 0.05 4.0 ± 0.1 4.0 ± 0.05 1.2 max. 12.0 ± 0.1 P0 D E Cover tape F W B A 1.1 Max. P1 (4) REEL DIMENSIONS AND QUANTITIES FIG. C. 178∅ ±2 60∅ ±2 13∅ ±0.2 2.0 ± 0.5 Type EIA Size NRCA04 NRCA06 NRCA10 NRCA12 NRCA25 NRCA50 NRCA100 0402 0603 0805 1206 1210 2010 2512 L 9.0 ± 0.5 14.0 ± 0.2 7" reel 10,000 5,000 5,000 5,000 5,000 4,000 4,000 Quantity* 10" reel n/a 10,000 10,000 10,000 10,000 n/a n/a 13" reel n/a 20,000 20,000 20,000 20,000 n/a n/a * Same for JUMPER (ZO) types. L NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 5