Pb-Free Thick Film Chip Resistors NRCL Series FEATURES • LEAD (Pb)-FREE CONSTRUCTION • COMPLIES WITH RoHS DIRECTIVE 2002/95/EC WITHOUT EXEMPTIONS • EIA STANDARD SIZING 0201 (1/20W), 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W) AND 1210 (1/3W) • THICK FILM CONSTRUCTION USING HIGH PURITY ALUMINA SUBSTRATE WITH PB-FREE RESISTIVE PASTE COVERED WITH PROTECTIVE OVERCOAT • HIGH TEMPERATURE (+260°C) REFLOW SOLDERING COMPATIBLE • AVAILABLE IN ZERO OHM (JUMPER) Type EIA Size NRCL02 0201 NRCL04 0402 NRCL06 0603 NRCL10 0805 NRCL12 1206 NRCL25 1210 NRCL02ZO NRCL04ZO NRCL06ZO NRCL10ZO NRCL12ZO NRCL25ZO 0201 0402 0603 0805 1206 1210 RoHS Compliant Pb Free (<100ppm) Max.*1 Max.*2 Resistance Temperature Resistance Operating Power Rating Resistance Working Overload Tolerance Coefficient Range Temperature at 70°C Value Voltage Voltage (Code) (ppm/°C) (Ω) Range (°C) ±200 100 ~ 1M ±1% (F) +800/-100 1.0 ~ 9.76 E-24,E-96 +600/-0 10 ~ 97.6 1/20 (0.05) W 25V 50V -55 ~ +125 ±200 100 ~ 10M ±5% (J) +800/-100 1.0 ~ 9.1 E-24 +600/-0 10 ~ 91 ±1% (F) ±200 10 ~ 1M E-24,E-96 +500/-300 1.0 ~ 9.1 1/16 (0.063) W 50V 100V ±5% (J) ±200 10 ~ 1M E-24 ±300 1.1M ~ 10M ±1% (F) ±100 10 ~ 1M E-24,E-96 1/10 (0.10) W 50V 100V +500/-300 1.0 ~ 9.1 ±5% (J) E-24 ±200 10 ~ 10M ±1% (F) ±100 10 ~ 1M E-24,E-96 -55 ~ +155 1/8 (0.125) W 150V 300V +500/-300 1.0 ~ 9.1 ±5% (J) E-24 ±200 10 ~ 1M ±1% (F) ±100 10 ~ 10M E-24,E-96 1/4 (0.25) W 200V 400V +500/-300 1.0 ~ 9.1 ±5% (J) E-24 ±200 10 ~ 10M ±1% (F) ±100 10 ~ 1M E-24,E-96 1/3 (0.33) W 200V 400V +500/-300 1.0 ~ 9.1 ±5% (J) E-24 ±200 10 ~ 10M Rated Current 1.0A (0.05Ω max. DC Resistance) -55 ~ +125 Rated Current 1.0A (0.05Ω max. DC Resistance) Rated Current 1.0A (0.05Ω max. DC Resistance) Zero Ohm Jumper Rated Current 1.5A (0.05Ω max. DC Resistance) -55 ~ +155 Rated Current 2.0A (0.05Ω max. DC Resistance) Rated Current 2.5A (0.05Ω max. DC Resistance) Note *1 - Maximum allowable continuous Working Voltage for all resistors is the lower of the two values: “Maximum Working Voltage” as specified above (or) Power Derating Curve: For operation above 70°C, power rating must be derated according to the following chart: 100 80 Note *2 - Maximum allowable Overload voltage is 2.5 times the Maximum Working Voltage (see Note *1 above). RATE (%) Power rating (Watts) x Resistance (Ohms) 60 40 20 0 NIC COMPONENTS CORP. www.niccomp.com -20 www.lowESR.com 20 60 100 www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE 140 160 125 155 o C www.SMTmagnetics.com 1 Pb-Free Thick Film Chip Resistors NRCL Series DIMENSIONS (mm) Type NRCL02 NRCL04 NRCL06 NRCL10 NRCL12 NRCL25 NRCL02ZO NRCL04ZO NRCL06ZO NRCL10ZO NRCL12ZO NRCL25ZO Power Rating 1/20W 1/16W 1/10W 1/8W 1/4W 1/3W Jumper Jumper Jumper Jumper Jumper Jumper EIA Size 0201 0402 0603 0805 1206 1210 0201 0402 0603 0805 1206 1210 L W 0.6 ± 0.03 1.0 ± 0.05 1.6 ± 0.10 2.0 ± 0.10 3.1 ± 0.10 3.1 ± 0.10 H T 0.3 ± 0.03 0.23 ± 0.03 0.15 ± 0.05 0.50 ± 0.05 0.35 ± 0.05 0.25 ± 0.10 0.8 ± 0.10 0.45 ± 0.15 0.30 ± 0.15 1.25 ± 0.10 0.50 ± 0.15 0.40 ± 0.20 1.60 ± 0.10 0.60 ± 0.15 0.45 ± 0.20 2.60 ± 0.10 0.55 ± 0.10 0.50 ± 0.20 Same as NRCL02 Same as NRCL04 Same as NRCL06 Same as NRCL10 Same as NRCL12 Same as NRCL25 t 0.10 ± 0.05 0.20 ± 0.10 0.30 ± 0.10 0.40 ± 0.20 0.50 ± 0.20 0.50 ± 0.20 CONSTRUCTION OVERCOAT COLOR 0201 - Black 0402 ~ 1210 - Blue Examples of Resistance Code: 4R7 = 4.7 ohms PART NUMBER SYSTEM (5% tolerance E-24 values) 100 = 10 ohms NRCL 10 J 103 TR 10 F 101 = 100 ohms RoHS compliant 102 = 1K ohms Opt. reel quantity for 0201 ~ 1210 case sizes Tape & Reel Packaging Resistance Code: First 3 figures are significant, 4th digit is the multiplier, “R” indicates a decimal point. Tolerance Code: J=5% Size Code Series PART NUMBER SYSTEM (1% tolerance E-24 & E-96 values) Examples of Resistance Code: NRCL 10 F 1003 TR 10 F RoHS compliant Opt. reel quantity for 0201 ~ 1210 case sizes Tape & Reel Packaging Resistance Code: First 3 figures are significant, 4th digit is the multiplier, “R” indicates a decimal point. Tolerance Code: F=1% Size Code Series 103 = 10K ohms 104 = 100K ohms 105 = 1 meg ohms 106 = 10meg ohms 10R0 = 10 ohms 47R5 = 47.5 ohms 1000 = 100 ohms 1001 = 1K ohms 1002 = 10K ohms 1003 = 100K ohms 1004 = 1meg ohms 1050 = 105 ohms 1501 = 1.5K ohms 1052 = 10.5K ohms 1153 = 115K ohms 1214 = 1.21meg ohms RESISTANCE VALUE MARKING: Components are NOT marked. 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Pb-Free Thick Film Chip Resistors NRCL Series TAPING SPECIFICATIONS REEL QUANTITY Type NRCL02 NRCL04 NRCL06 NRCL10 NRCL12 NRCL25 NRCL02ZO NRCL04ZO NRCL06ZO NRCL10ZO NRCL12ZO NRCL25ZO Power Rating 1/20W 1/16W 1/10W 1/8W 1/4W 1/3W Jumper Jumper Jumper Jumper Jumper Jumper EIA Size 0201 0402 0603 0805 1206 1210 0201 0402 0603 0805 1206 1210 Qty per 7" Reel (Std) 15,000 10,000 5,000 5,000 5,000 5,000 15,000 10,000 5,000 5,000 5,000 5,000 Qty per 10" Reel (Opt) n/a n/a 10,000 10,000 10.000 10,000 n/a n/a 10,000 10,000 10.000 10,000 Qty per 13" Reel (Opt) n/A n/a 20,000 20,000 20,000 20,000 n/a n/a 20,000 20,000 20,000 20,000 CARRIER TAPE DIMENSIONS (mm) Type EIA Size A B D NRCL02* NRCL04* NRCL06* NRCL10* NRCL12* NRCL25* 0201 0402 0603 0805 1206 1210 0.37 ± 0.05 0.70 ± 0.10 1.10 ± 0.20 1.65 ± 0.20 2.00 ± 0.20 3.00 ± 0.20 0.67 ± 0.05 1.20 ±0.10 1.90 ± 0.20 2.40 ±0.20 3.60 ±0.20 3.60 ± 0.20 E 1.5 +0.1/-0.0 F Po P1 P2 T W 2.0 ± 0.10 N/A 0.40 ± 0.05 N/A 4.0 ± 0.10 0.65 ± 0.05 1.75 ± 0.1 3.5 ± 0.20 4.0 ± 0.10 8.0 ± 0.3 1.0 max. * Same for JUMPER (ZO) types. P0 D E Cover tape F W B A P1 T P2 B A C REEL SPECIFICATIONS Type EIA Size NRCL02* NRCL04* NRCL06* NRCL10* NRCL12* NRCL25* 0201 0402 0603 0805 1206 1210 A ± 2.0 φ178 (Std) - B ± 1.0 C ± 0.2 D ± 0.5 - φ178 φ254 φ330 (Std) (Opt) (Opt) φ60 φ13 φ9.0 * Same for JUMPER (ZO) types. 1. Leader tape : Approximately 250 m/m (160mm for 0201 case size)leader shall be provided at each end of the tape. D NIC COMPONENTS CORP. www.niccomp.com 2. Accumulative tolerance of feeding hole and chip pocket shall not exceed 0.2mm over 10 pitches. www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 3 Pb-Free Thick Film Chip Resistors LAND PATTERN DIMENSIONS (mm) Type NRCL02 NRCL04 NRCL06 NRCL10 NRCL12 NRCL25 EIA Size 0201 0402 0603 0805 1206 1210 A 0.30 0.50 0.90 1.20 2.00 2.00 B 0.30 0.50 0.60 0.70 0.90 0.90 C 0.30 0.60 0.90 1.30 1.60 2.80 NRCL Series PEAK REFLOW SOLDERING CONDITIONS 300 260°C 10 Sec. 250 1 ~ 5°C/Sec. 1 ~ 5°C/Sec. 200 150 C 50 B 120 Sec. 100 A 1 ~ 9°C/Sec. 0 ENVIRONMENTAL CHARACTERISTICS Specification Item 0Ω Resistance As specified <50mΩ Measured at: <10Ω @ 0.1V, <100Ω @ 0.3V, < 1KΩ @ 1.0V <10KΩ @ 3V, <100KΩ @ 10V, <1MΩ @ 25V, <10MΩ @ 30V Temperature Coefficient of Resistance As specified N/A JIS C5201-1 Clause 4.8 Short Time Overload ΔR/R max. ±(2% + 0.10Ω) <50mΩ RCWV x 2.5 or Max Overloading Voltage for 5 Seconds JIS C5201-1 Clause 4.13 Resistance to soldering heat ΔR/R max. ±(1% + 0.05Ω) <50mΩ Immersion for 10 ± 1 second in SAC solder +260°C JIS C5201-1 Clause 4.18 Temperature Cycling ΔR/R max. ±(1% + 0.05Ω) <50mΩ 5 cycles -55°C/+20°C/+155°C JIS C5201-1 Clause 4.19 <50mΩ 1,000 hours @ +40°C, 90% ~ 95% RH JIS C5201-1 Clause 4.24 <50mΩ 1,000 hours @ +70°C JIS C5201-1 Clause 4.25 Humidity Load Life Load Life Adhesion Strength Bending Strength 4 Test Method Tol. ± 1.0% & ± 5% 10Ω<R<1MΩ ΔR/R max. ±(3% + 0.10Ω) R<10Ω <or >1MΩ ΔR/R max. ±(5% + 0.10Ω) 10Ω<R<1MΩ ΔR/R max. ±(3% + 0.10Ω) R<10Ω <or >1MΩ ΔR/R max. ±(5% + 0.10Ω) No removal of termination No visible damage ΔR/R max. ±(1% + 0.05Ω) NIC COMPONENTS CORP. www.niccomp.com 5N for 10 seconds JIS C5201-1 Clause 4.32 <50mΩ 5mm (0201 & 0402), 3mm (0603 ~ 1210) deflection for 10 seconds JIS C5201-1 Clause 4.33 www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com