Thick Film Chip Resistors NRCV Series FEATURES NEW High Voltage Resistors (Up to 3KV) • EIA STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) • HIGH VOLTAGE (100VDC ~ 3,000VDC) • HIGH RESISTANCE VALUES (UP TO 100MW) • THICK FILM ON ALUMINA SUBSTRATE, RuO2/Ag RESISTIVE LAYER • GLASS AND EPOXY OVERCOAT Type EIA Size Max.*1 Max.*2 Power Rating Working Overload at 70°C Voltage Voltage 0402 1/16W (0.063W) NRCV06 0603 1/10W (0.10W) 200V 400V NRCV10 0805 1/8W (0.125W) 400V 800V NRCV04 NRCV12 NRCV50 NRCV100 1206 1/4W (0.25W) 2010 1/2W (0.50W) 2512 1W 100V 500V 2000V 3000V 200V 1000V 3000V 4000V Resistance Tolerance (Code) ±1% (F) ±5% (J) ±1% (F) ±5% (J) ±5% (J) ±1% (F) ±5% (J) ±1% (F) ±5% (J) ±5% (J) ±1% (F) ±5% (J) ±1% (F) ±5% (J) ±5% (J) ±1% (F) ±5% (J) ±1% (F) ±5% (J) ±5% (J) ±1% (F) ±5% (J) ±1% (F) ±5% (J) ±5% (J) ±1% (F) ±5% (J) ±1% (F) ±5% (J) ±5% (J) Temperature Coefficient (ppm/°C) Note *1 - Maximum allowable continuous Working Voltage for all resistors is the lower of the two values: “Maximum Working Voltage” as specified above (or) Resistance Range (Ω) Operating Resistance Temperature Value Range (°C) ±100 39K ~ 1M E-24,E-96 ±200 ±200 ±400 1.02M ~ 10M 1.1M ~ 20M 22M ~ 100M E-96 E-24 E-24 ±100 56K ~ 1M E-24,E-96 ±200 ±200 ±400 1.02M ~ 10M 1.1M ~ 20M 22M ~ 100M E-96 E-24 E-24 ±100 100K ~ 1M E-24,E-96 ±200 ±200 ±400 1.02M ~ 10M 1.1M ~ 20M 22M ~ 100M E-96 E-24 E-24 ±100 100K ~ 1M E-24,E-96 ±200 ±200 ±400 1.02M ~ 10M 1.1M ~ 20M 22M ~ 100M E-96 E-24 E-24 ±100 51K ~ 1M E-24,E-96 ±200 ±200 ±400 1.02M ~ 10M 1.1M ~ 20M 22M ~ 100M E-96 E-24 E-24 ±100 30K ~ 1M E-24,E-96 ±200 ±200 ±400 1.02M ~ 10M 1.1M ~ 20M 22M ~ 100M E-96 E-24 E-24 -55 ~ +155 Power Derating Curve: For operation above 70°C, power rating must be derated according to the following chart: 100 80 Note *2 - Maximum allowable Overload voltage is two times the Maximum Working Voltage (see Note *1 above). RATE (%) Power rating (Watts) x Resistance (Ohms) 60 40 20 0 -20 20 100 60 70 140 160 155 o C PART NUMBER SYSTEM (1% Tol. E-24 & E96 VALUES) PART NUMBER SYSTEM (5% Tol. E-24 VALUES) NRCV 12 F 1002 TR 10 F NRCV 12 J 103 TR 10 F RoHS compliant RoHS compliant Opt. Reel Qty 10=10K (see page 5) Opt. Reel Qty 10=10K (see page 5) Tape & Reel Packaging Tape & Reel Packaging Resistance Code: First 3 figures are significant, Resistance Code: First 2 figures are significant, 4th digit is the multiplier 3rd digit is the multiplier Tolerance Code: F = 1% Tolerance Code: J = 5% Size Code Size Code Series Series 1 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Thick Film Chip Resistors NRCV Series NRCV Series - Examples of Advantage in Voltage Rating 0402 and 0603 Case Sizes 2010 Case Size 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Thick Film Chip Resistors NRCV Series Based on voltage rating formula Working Voltage = Power rating (Watts) x Resistance (Ohms) the NRCV parts will have a higher voltage rating than the standard NRC parts in values above (see table below): EIA Size 0402 0603 0805 1206 2010 2512 Resistance Value 39.2K 24.9K 178K 158K 78.7K 61.9K Example: Maximum voltage for 0805 case size, 470K ohm part: 0.125 (Watts) x 470,000 (Ohms) 1. NRC10 (0.125W) maximum voltage is 2. NRCV10 (0.125W) maximum voltage is = 242.3V or 150V whichever is less, so limit is 150V 0.125 (Watts) x 470,000 (Ohms) = 242.3V or 400V whichever is less, so limit is 242.3V ENVIRONMENTAL CHARACTERISTICS Item Temperature Coefficient of Resistance Short Time Overload Insulation Resistance Tol. 1% Test Method Tol. 5% JIS-C-5201-1 4.8 & IEC-60115-1 4.8 -55°C ~ +125°C, +25°C is the reference temperature As specified ∆R ±(1% + 0.05W) ∆R ±(2% + 0.05W) JIS-C-5201-1 4.13 & IEC-60115-1 4.13 RCWV x 2.5 or max overloading voltage whichever is less for 5 Seconds JIS-C-5201-1 4.6 & IEC-60115-1 4.6 Maximum overload voltage for 1 minute >10,000MΩ JIS-C-5201-1 4.25 & IEC-60115-1 4.25.1 RCWV +70°C ± 2°C, 1.5 hours "ON", 0.5 hours "OFF" Total time 1,000 hours JIS-C-5201-1 4.24 RCWV +40°C ± 2°C, 90~95% RH, 1.5 hour "ON", 0.5 hours "OFF" Total time 1,000 hours Endurance (Load Life) ∆R ±(2% + 0.10W) ∆R ±(3% + 0.10W) Damp Heat with Load ∆R ±(2% + 0.10W) ∆R ±(3% + 0.10W) Dry Heat ∆R ±(1% + 0.05W) ∆R ±(1.5% + 0.10W) JIS-C-5201-1 4.23 & IEC-60115-1 2.23.2 at +155°C for 1,000 hours Bending Strength ∆R ±(1% + 0.05W) ∆R ±(1.0% + 0.05W) JIS-C-5201-1 4.33 & IEC-60115-1 4.33 Bend once for 5 seconds (0402 ~ 1206: 3mm, 2010, 2512: 2mm) Solderability Resistance to Soldering Heat 95% minimum coverage ∆R ±(0.5% + 0.05W) ∆R ±(1.0% + 0.05W) JIS-C-5201-1 4.17 & IEC-60115-1 4.17 245°C ± 5°C for 3 seconds JIS-C-5201-1 4.18 & IEC-60115-1 4.18 260°C ± 5°C for 10 seconds Withstanding Voltage No breakdown or flashover JIS-C-5201-1 4.7 & IEC-60115-1 4.7 0402: 150V for 1 minute 0603: 300V for 1 minute 0805, 1206, 1210 and 2512: 500V for 1 minute Leaching Individual leaching area < 5% Total leaching area < 10% JIS-C-5201-1 4.18 & IEC-60068-2-58 8.2.1 260°C ± 5°C for 30 seconds Rapid Change in Temperature 3 Specification ∆R ±(0.5% + 0.05W) ∆R ±(1.0% + 0.05W) NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com JIS-C-5201-1 4.18 & IEC-60115-1 4.18 -55°C ~ 155°C, 5 cycles www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Thick Film Chip Resistors NRCV Series CONSTRUCTION No. 1 2 3 4 5 6 7 8 9 Item 2nd Overcoat Primary Overcoat Resistive Layer Substrate Bottom Electrode Temination Finish Barrier Layer Edge Electrode Top Electrode Material Epoxy Glass RuO2 Alumina Ag Sn Ni NiCr Ag-Pd 9 8 7 6 1 2 3 4 5 COMPONENT DIMENSIONS (mm) Type NRCV04 NRCV06 NRCV10 NRCV12 NRCV50 NRCV100 EIA Size 0402 0603 0805 1206 2010 2512 L W H T t 1.00 ± 0.05 1.60 ± 0.15 2.00 ± 0.20 3.10 ± 0.10 5.00 ± 0.10 6.35 ± 0.10 0.50 ± 0.05 0.80 ± 0.10 1.25 ± 0.10 1.55 ± 0.10 2.50 ± 0.15 3.10 ± 0.15 0.35 ± 0.05 0.45 ± 0.10 0.50 ± 0.10 0.55 ± 0.10 0.55 ± 0.10 0.55 ± 0.10 0.20 ± 0.10 0.30 ± 0.20 0.40 ± 0.20 0.50 ± 0.20 0.50 ± 0.20 0.50 ± 0.20 0.20 ± 0.10 0.30 ± 0.20 0.35 ± 0.20 0.50 ± 0.25 0.60 ± 0.25 0.60 ± 0.25 LAND PATTERN DIMENSIONS (mm) Type NRCV04 NRCV06 NRCV10 NRCV12 NRCV50 NRCV100 EIA Size 0402 0603 0805 1206 2010 2512 A B C 0.50 0.90 1.20 2.00 3.80 3.80 0.45 0.60 0.70 0.90 0.90 1.60 0.60 0.90 1.30 1.60 2.80 3.50 300 260 245 220 200 C B B A REFLOW SOLDERING TEMPERATURE PROFILE Peak Temperature 260°C 10 sec. max. Time >245°C 60 sec. max. Time >220°C 60 sec. max. 150 100 150°C ~ 180°C 90 ~120 Sec. 50 0 4 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Thick Film Chip Resistors NRCV Series COMPONENT MARKING (Note: no marking on 0402 case size parts). 1. For E-24 Series J (±5%) Tolerance In 0603, 0805, 1206, 2010 and 2512 sizes: 3 DIGIT SYSTEM - First two digits are significant and third digit is multiplier Examples: 100 = 10 ohms 101 = 100 ohms 105 = 1,000,000 ohms 102 = 1,000 106 = 10,000,000 ohms 103 = 10,000 ohms 104 = 100,000 ohms 107 = 100,000,000 ohms 2. For E-96 Series F (±1%) Tolerance in 0805, 1206 and 2010 and 2512 sizes: 4 DIGIT SYSTEM - First 3 digits are significant and fourth digit is multiplier, "R" represents decimal point Examples: 10R0 = 10 ohms 1000 = 100 ohms 1001 = 1,000 ohms 1002 = 10,000 1003 = 100,000 ohms 1004 = 1,000,000 ohms 1005 = 10,000,000 ohms 3. For E-96 Series F (±1%) Tolerance in 0603 size (available from 10 ohm ~ 10Mohm) Special 3 DIGIT SYSTEM below (Due to space restrictions) 0603 E-96 VALUES 1% TOLERANCE RESISTANCE CODE E-96 Value Code 100 01 110 05 121 09 133 13 147 17 162 21 178 25 196 29 215 33 237 37 261 41 287 45 316 49 348 53 383 57 422 61 464 65 511 69 562 73 619 77 681 81 750 85 825 89 909 93 Value Code 102 02 113 06 124 10 137 14 150 18 165 22 182 26 200 30 221 34 243 38 267 42 294 46 324 50 357 54 392 58 432 62 475 66 523 70 576 74 634 78 698 82 768 86 845 90 931 94 Value Code 105 03 115 07 127 11 140 15 154 19 169 23 187 27 205 31 226 35 249 39 274 43 301 47 332 51 365 55 402 59 442 63 487 67 536 71 590 75 649 79 715 83 787 87 866 91 953 95 Value Code 107 04 118 08 130 12 143 16 158 20 174 24 191 28 210 32 232 36 255 40 280 44 309 48 340 52 374 56 412 60 453 64 499 68 549 72 604 76 665 80 732 84 806 88 887 92 976 96 MULTIPLIER CODE Code A B,b C D,d E F G H X Y Z Multiplier 100 101 102 103 104 105 106 107 10-1 10-2 10-3 CODING FORMULA XX X Multiplier Code Example: 10.2kΩ = 102 x 102 Ω = 02C 02 C 33.2 Ω = 332 x 10-1 = 51X 51 X Resistance Code 5 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com Marking Examples 10Ω = 01X 7.5KΩ = 85B or 85b 150KΩ = 18D or 18d 6.81MegΩ = 81E 10MegΩ = 01F www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Thick Film Chip Resistors NRCV Series PUNCHED Taping Specifications 1. Reel Quantities EIA Size 0402 0603 0805 1206 Type NRCV04 NRCV06 NRCV10 NRCV12 Carrier Tape Material Paper Paper Paper Paper Fig. A A A A Qty per 7" Reel 10,000 5,000 5,000 5,000 Width (mm) 8 8 8 8 Qty per 10" Reel 20,000 10,000 10,000 10.000 Qty per 13" Reel 40,000 20,000 20,000 20,000 2. Carrier Dimensions (mm) Type EIA Size A B NRCV04 NRCV06 NRCV10 NRCV12 0402 0603 0805 1206 0.65 ± 0.10 1.10 ± 0.10 1.60 ± 0.10 1.90 ± 0.10 1.15 ± 0.10 1.90 ± 0.10 2.40 ± 0.20 3.50 ± 0.20 D E F Po P1 P2 T 1.5 + 0.1 / - 0 0.45 ± 0.10 0.70 ± 0.10 1.75 ± 0.1 3.5 ± 0.05 4.0 ± 0.1 2.0 ± 0.05 4.0 ± 0.05 0.85 ± 0.10 0.85 ± 0.10 W 2.0 ± 0.05 P0 P2 8.0 ± 0.2 D E Cover tape F W B A P1 T 3. Embossed Plastic Tape Specification Reel Quantities and Carrier Dimensions (mm) Type EIA Size A fD B NRCV50 2010 2.8 ± 0.1 5.5 ± 0.1 1.5 +0.1 / -0 NRCV100 2512 3.5 ± 0.1 6.7 ± 0.1 E F 1.75 ± 0.1 5.5 ± 0.05 P0 P1 4.0 4.0 ± 0.1 ± 0.1 P0 P2 T W 2.0 ± 0.05 1.2 +0 12.0 ± 0.1 Qty per Reel 7" Reel 10" Reel 4,000 8,000 fD E Cover tape F W B P1 A T 6 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Thick Film Chip Resistors NRCV Series 4. Reel Specifications Type NRCV04 NRCV06 NRCV10 NRCV12 NRCV50 NRCV100 Reel Diameter fA 7" 178.5 ± 1.5 10" 254 ± 1.0 13" 330 ± 1.0 7" 178.5 ± 1.5 10" 254 ± 1.0 13" 330 ± 1.0 7" 178.5 ± 1.5 10" 254 ± 1.0 fB (mm) fC (mm) fW (mm) fT (mm) Reel Qty Part Number Suffix 10,000 20,000 40,000 5,000 10,000 20,000 4,000 8,000 TRF TR20F TR40F TRF TR10F TR20F TRF TR8F 60 +1 / -0 9.0 ± 0.5 12.5 ± 0.5 100 ± 0.5 9.5 ± 0.5 13.5 ± 0.5 9.0 ± 0.5 12.5 ± 0.5 100 ± 0.5 9.5 ± 0.5 13.5 ± 0.5 60 +1 / -0 62 ± 0.5 13.0 ± 0.5 12.5 ± 0.5 15.5 ± 0.5 16.5 ± 0.5 60 +1 / -0 13.0 ± 0.2 T fC fB W fA 7 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com