www.niccomp.com | technical support: [email protected] PRESS RELEASE August 2014 / Ref: NIC‐082514NRSNL Pb‐Free Thick Film Chip Resistor Arrays RoHS 7C1 exemption free construction Series Link: www.niccomp.com/series/NRSNL Standard construction thick film chip resistor arrays commonly take the RoHS directive exemption 7C1 to achieve RoHS compliance. Exemption 7C1 allows electrical and electronic components containing lead in glass or ceramic matrix compound to exceed the 1,000PPM (0.1%) threshold. NIC is pleased to offer NRSNL series of Pb free thick film chip resistor arrays, which does not take the RoHS exemption, as the level of Pb has been reduced below the RoHS threshold of 1,000PPM (0.1%). The NRSNL series 4 element arrays are available in EIA standard 0408 (0402 x 4) & 0612 (0603 x 4) case sizes with convex terminal construction. Supported in E24 (+/‐5% tolerance) and E96 (+/‐1% tolerance) resistance values, with individual element power ratings of 1/16W (0.0625W) in 0408 size and 1/10W (0.10W) in 0612 size. Operating temperature range of ‐ 55°C to +155°C with power rating derated above +70°C. Voltage ratings of 50V cover resistance values from 1 Ohm to 10 Meg‐Ohm with temperature coefficient of resistance of ±100ppm/°C and ±200ppm/°C. NRCL series is supplied without resistance value marking. Zero ohm (jumper) versions are supported in both case sizes with 1.0A current rating and maximum resistance of 50mΩ. Supplied on carrier tape for automated placement and compatible with Pb‐ free reflow soldering. Component pricing of $0.008 to $0.04USD each when purchased in production volumes. Free samples are available from NIC for design and evaluation purposes. APPLICATIONS: NRSNL Features Pull‐up & Pull‐down RoHS compliant (Pb‐Free) without 7C1 exemption Termination For users whom cannot accept RoHS 7C1 exemption components Current Limiting Low Cost Thick Film Construction Memory Modules Miniature Size And Low Profile Voltage Proportioning High Density Packaging = Significant Space Savings Circuit Bias Lower Production Costs with fewer placements Filtering Compatible with Pb‐Free Reflow Soldering Impedance Matching Upgrade and replace thick film resistor arrays, which take Exemption 7C1, from KOA, ROHM, SEI, VISHAY, YAGEO Product Specification: www.niccomp.com/catalog/nrsnl.pdf Technical Support: [email protected] / www.niccomp.com/sales/contacts.asp Sales Contacts: Europe / Tel: 44 1280 813 737 ... Roger Addison: [email protected] North America / Tel: (631) 396‐7500 ... Eric Moller: [email protected] SE Asia / Tel: 65‐68441575 ... Tony Ng: [email protected] Editorial Contact: Jim Wright, VP Technical Marketing, NIC Components Corp. [email protected] ISO 9001:2008 REGISTERED