CERAMIC DISC CAPACITORS CLASS 1 Series: Temperature Compensating RoHS FEATURES INTRODUCTION • Low Capacitance 0.5pf~1200pf • High Q • High Temperature Stability • Resonant Circuit Applications • Timing Circuit Applications Single layer metalized ceramic disc with resin coating (wax impregnated) below 1KV or epoxy coated 1KV up. Class1 material is the most temperature stable PART NUMBER EXAMPLE 1 CG 101 J 500 A54 B Temperature Coefficient Capacitance Code Tolerance Code 3mm max Disc Diameter (D) 25mm min Packing Code Lead Code Voltage Code Lead Space (F) ±0.05 mm(d) DIMENSIONS (mm) & CAPACITANCE RANGE (F:Standard Lead Spacing. Other lead spacing may be available upon request.) Thickness Voltage Cap (pf) Code 0.5 0R5 1 1R0 5.1 5R1 10 100 12 120 15 150 18 180 20 200 22 220 24 240 27 270 30 300 33 330 39 390 47 470 51 510 56 560 62 620 68 680 75 750 82 820 91 910 100 101 120 121 130 131 150 151 180 181 200 201 220 221 240 241 270 271 300 301 330 331 390 391 470 471 510 511 560 561 680 681 750 751 850 851 1000 102 1200 122 50 / 100V CG SL D=5 F=2.5 4.0 mm max. 500V/630V CG SL D=5 F=2.5 5.0 2KV 1KV CG SL CG 6.5 3KV SL D=6 F=5.0 D=7 F=9.5 D=7 F=6.35 D=6 F=5.0 D=6 F=5.0 SL D=7 F=5.0 D=6 F=5.0 D=5 F=2.5 CG D=8 F=9.5 D=5 F=2.5 D=5 F=2.5 D=5 F=2.5 D=7 F=5.0 D=7 F=5.0 D=6 F=2.5 D=8 F=5.0 D=8 F=5.0 D=7 F=5.0 D=6 F=5.0 D=9 F=5.0 D=7 F=5.0 D=10 F=5.0 D=12 F=6.35 D=9 F=5.0 D=8 F=5 D=9 F=5 D=10 F=5 D=10 F=5 D=6 F=5.0 D=8 F=5.0 D=12 F=5.0 D=14 F=6.35 D=8 F=5.0 8.0 5K / 6KV SL D=9 F=6.35 D=8 F=6.35 D=9 F=9.5 D=6 F=5.0 D=10 F=6.35 D=12 F=6.35 D=9 F=6.35 D=12 F=6.35 D=7 F=5.0 D=8 F=5.0 D=14 F=9.5 D=8 F=6.35 D=14 F=9.5 D=10 F=9.5 D=11 F=9.5 D=14 F=9.5 D=13 F=6.35 D=12 F=6.35 D=9 F=5.0 D=12 F=5 D=9 F=5.0 D=10 F=5.0 D=9 F=5.0 D=10 F=5.0 D=18 F=9.5 D=14 F=6.35 Page 1 of 3 C1BE01 2012.03.08 CERAMIC ISC CAPACITORS CLASS 1 Series: Temperature Compensating ELECTRICAL CHARACTERISTICS Technical Data Condition 1 MHz ± 20%, 1± 0.2 Vrms, 25°C ± 2°C Capacitance Operating Temperature Q TEMPERATURE COEFFICIENT CODE C>30pF C<30pF Temperature Characteristics Specification Code EIA Code 0.5pF ~ 1200pF -55°C ~ +85°C C0G(NP0) SL RoHS Q>1000 Q>400 + 20 X C ( C is nominal Capacitance) >10GΩ Insulation Resistance rated voltage at 25°C ± >°C and 70% R.H max Encapsulation Standard 1KV and higher Phenolic Wax Epoxy Coating Solderability of Leads at least 75 % covered Solder temperature 260°C ± 5°C Dipping: 3±0.5 sec (Flur shall be used) CG C0G (NPO) 0 ± 30 PPM/°C -55 °C to +85 °C SL S2L -300 +500 PPM/°C -55 °C to +85 °C ZU Z5U +22 to -56% +10 °C to +85 °C ZV Z5V +22 to -82% +10 °C to +85 °C +85 °C YE Y5E ±4.7 % -30 °C to YP Y5P ±10 % -30 °C to +85 °C YU Y5U +22 to -56% -30 °C to +85 °C YV Y5V +22 to -82% -30 °C to +85 °C XR X7R ±15 % -55 °C to +125 °C RADIAL STRAIGHT-LEAD ON TAPE (S56 LEAD CODE) RADIAL KINK-IN ON TAPE (K56 LEAD CODE) *Most Popular Characteristics. Code Dimensions D 11.0 max d 0.6 ±0.05 P 12.7 ±1.0 P0 12.7 ±0.3 P1 3.85 ±0.7 P2 6.35 ±1.3 F 5.0 +0.8 -0.2 Dh 0 ±2.0 W 18.0 +1.0 -0.5 W1 9.0 +0.75 -0.5 W2 3.0 max H 18.0 +3.0 -0 H0 16.0 ±0.5 H1 32.25 max K 1.0 max D0 4.0 ±0.2 t 0.7 ±0.2 L 11.0 max Page 2 of 3 C1BE01 2012.03.08 CERAMIC ISC CAPACITORS CLASS 1 Series: Temperature Compensating RoHS REEL PACK (R SUFFIX) TOLERANCE CODE Code Tolerance C ±0.25pF D ±0.5pF F ±1% G ±2% J ±5% K ±10% M ±20% 53±1 30±1 f360 max AMMO PACK (A SUFFIX) VOLTAGE CODE EXAMPLE 501 500V 500 50V 502 5KV 253±5mm Code WVDC LEAD CODES FOR BULK PACK (CERAMIC DISC ONLY) A-Straight D-Kink Out 3.0mm 4.8mm max 4.8±1 mm 25.4mm min F-Special Length Y-Y Formed Per Customer Specification 4.0 mm max 4.8±1 mm Lead Spacing Wire dia. (±1.00) in mm (±0.05) in mm Code 2 5 6 7 9 0 A P 2.5 5 6.35 7.5 10.0 12.7 15.0 m 3m ± 48 Lead Type C-Kink In mm ±5 330 4.8mm max 4.8±1 mm S & K-Taped See taping specifications above. HOW TO MAKE THE LEAD CODE FOR CERAMIC DISC (FOR BULK PACK ONLY) A67B Bulk Wire Dia. Lead Spacing Lead Type Code df 4 0.48 6 0.6 7 0.65 8 0.8 9 1.0 Page 3 of 3 C1BE01 2012.03.08