PBSN Pressure transmitter for general industrial applications Main features Robust stainless housing for harsh environment conditions Abrasive and chemical resistant due to ceramic measurement cell External programming of zero point and span with FlexProgrammer 9701 Applications Pneumatic Medical gas Factory automation Technical specifications Measuring principle Thick film on ceramic HVAC Agriculture vehicules Energy Shock IEC60068-2-27 50 g/11 ms 100 g/6 ms 3 x Imp. per Axis and direction Measuring ranges -1 ... 0 bar up to 0 ... 600 bar Type of pressure Relative / Absolute Bump IEC60068-2-27 100 g/2 ms 4000 x Imp. per axis and direction Accuracy (20 °C) ≤ 0.7% FS 0.5% FS Random IEC60068-2-64 0.1 g2/Hz (20 Hz – 1 KHz) 30 min per axis (>10 g RMS) Turn down 2:1 Performance after Turn down [Turn-Down] * [Accuracy] FS Zero thermal drift ≤ ± 0.08% FS/10 K Span thermal drift ≤ ± 0.08% FS/10 K Output signal / Power supply Load impedance Current ouput Voltage output Long term stability 0.2% FS / Year Insulation resistance >100 MΩ at 500 VDC Response time (10 … 90%) ≤ 5 ms Electrical connections See page 3 (includes linearity, hysteresis, ≤ repeatability, error of span and zero point according limit point adjustment) Process connections See page 3 4 … 20 mA / 8 … 32 VDC 0…10 V / 13 … 32 VDC RΩ = (Usupply-8 V) / 20 mA > 5 KΩ Material Process connection SS 1.4404 AISI 316L Housing -40 ... + 100°C -20 ... + 60°C -30 ... + 100°C -40 ... + 125°C -20 ... + 125°C -20 ... + 85°C IP65 (EN 60529) up to IP67 depending on electrical connection Vibration IEC60068-2-6 1.5 mm p-p (10 – 55 Hz), 10 g (55 Hz – 2 KHz) 3 cycles within 2.5 h per axis Ceramic (96% Al2O3) Sealing NBR, EPDM, FKM (Viton®) Cable PUR Approvals CE conformity EMC directive 2004/108/CE in accordance with EN 61000-6-2, EN 61000-6-3, EN 61326-1 (Tab.2) Pressure directive 97/23/CE 2015-05-12 Protection rating SS 1.4301 AISI 304 Diaphragm Design and specifications subject to change without notice Environment Temperature Storage Compensated range Medium NBR EPDM FKM (Viton®) Ambient Electrical specification www.baumer.com Data sheet A11.25 Page 1 / 4 PBSN Pressure transmitter for general industrial applications Measuring ranges and overpressure safety Pressure in bar Pressure range -1 ... 0 -1 ... 0.6 0 ... 1 0 ... 1.6 -1 ... 1.5 0 ... 2.5 -1 ... 3 0 ... 4 -1 ... 5 0 ... 6 -1 ... 9 0 ... 10 -1 ... 15 0 ... 16 -1 ... 24 0 ... 25 Over pressure 2 4 8 12 20 32 50 Burst pressure 3 7 12 18 30 48 75 0 ... 250 0 ... 400 0 ... 600 Pressure in bar Pressure range -1 ... 39 0 ... 40 0 ... 60 0 ... 100 0 ... 160 80 120 200 320 360 600 800 Burst pressure 120 180 300 480 480 800 1000 2015-05-12 Design and specifications subject to change without notice Over pressure www.baumer.com Data sheet A11.25 Page 2 / 4 PBSN Pressure transmitter for general industrial applications Electrical connections Signal at 4...20 mA / Signal at 0...10V Signal at 4...20 mA / Signal at 0...10 V Connector DIN 43650 M12 4-pins +VS / +VS 3 IOUT / GND n.c. / +VOUT 4 1 3 2 n.c. / +VOUT IOUT / GND 1 2 +VS / +VS n.c. / +VOUT earth earth Cable output Field housing (Red) / +VS / +VS Not included in delivery clamping range: 8...10 mm n.c. / +VOUT (Blue) / IOUT / GND 4 3 2 1 IOUT / GND (White) / n.c. / +VOUT +VS / +VS (Shield) / earth (Shield) / earth Dimensions (mm) Shielded cable (1,5 m), IP67 EN 175301-803A (DIN 43650 A) 4 pins, IP65 M12 4 pins, IP67 Ø 6 to 8 Shielded cable (1,5 m), IP67 Ø 34.5 Ø 6 to 8 12.5 M12 3 1 Ø 22.1 Ø 22.1 Hexa.: 23/flat Ø25 / angle Ø25 / angle Hexa.:Hexa.: 23/flat23/flat Ø25 / angle Ø25 / angle Hydraulic connections G 1/4 EN837 1/4 NPT 23 18 13 23 G 1/2 EN837 1/2 NPT 2015-05-12 G 1/4 DIN 3852-E 15 15 23/plats 25/angles Design and specifications subject to change without notice Hexa.: 23/flat 7.5 7.5 Ø 22.1 7.5 7.5 Ø 22.1 51 60 43.5 49.5 53.1 67.5 2 www.baumer.com Data sheet A11.25 Page 3 / 4 PBSN Pressure transmitter for general industrial applications Ordering details PBSN PBSN – 1 . PBSN Housing material Stainless steel 1.4301 AISI 304 Accuracy 0.7% FS 0.5% FS P > 1 bar Pressure range and unit in bar -1...0 Only pressure type relative -1...0.6 Only pressure type relative -1...1.5 Only pressure type relative -1...3 Only pressure type relative -1...5 Only pressure type relative -1...9 Only pressure type relative -1...15 Only pressure type relative -1...24 Only pressure type relative -1...39 Only pressure type relative 0...1 0...1.6 0...2.5 0...4 0...6 0...10 0...16 0...25 0...40 0...60 0...100 0...160 0...250 0...400 0...600 Kind of pressure Absolute Relative Output signal 4...20mA 0...10V Output connection M12, 4 pins DIN 43650, 4 pins Shielded cable (1.5 m) Process connection G¼ EN 837 G½ EN 837 ¼ NPT ½ NPT G¼ DIN 3852 x . xxx . x . xx . xx . xx . x . x – 1 . 2 3 . B59 B72 B74 B76 B77 B79 B81 B82 B1L B15 B16 B18 B19 B20 B22 B24 B26 B27 B29 B31 B33 B35 B38 B39 . A R . A1 A2 . 14 44 53 . 02 03 04 05 06 Process connection material Stainless steel 1.4404 AISI 316L . 2 Sealing NBR EPDM FKM (Viton®) . 2015-05-12 1 2 3 Design and specifications subject to change without notice Model Pressure transmitter www.baumer.com Data sheet A11.25 Page 4 / 4