CombiTemp TCR6 Standard RTD temperature sensor Main features Sensor and connection in stainless steel, AISI 316L DIN form B housing Robust design Applications Industrial applications with Water systems Tanks and vessels industrial process connection Pipe systems Heating systems Environment El. connection M20, option M16, M20 marine app. Output Pt100/Pt1000 Ceramic terminal block. 4...20 mA temperature transmitter Sensor tube material Stainless steel AISI 316L (1.4404) Sensor diameter outside Ø 6, Ø 8 or Ø 10 mm Sensor length Standard tip <3000 mm Fast response tip <300 mm Standard response tip Fast response tip As outside diameter Ø 4 x 20 mm Max. flow velocity Air : 40 m/sec Liquid : 5m/sec. Sensor element, Pt100 - DIN/EN/IEC 60751 Pt100 DIN class B Pt100 1/3 DIN class B Pt100 1/6 DIN class B Pt100 DIN class A ± (0.3 + 0.005xt) °C ± 1/3 x (0.3 + 0.005xt) °C ± 1/6 x (0.3 + 0.005xt) °C ± (0.15 + 0.002xt) °C Single element Double element 1 x Pt100 2 x Pt100 Connection 2-wire or 4-wire Sensor element, Pt1000 - DIN/EN/IEC 60751 Pt1000 DIN 1/3 DIN class B ± 1/3 x (0.3 + 0.005xt) °C Single element 1 x Pt1000 Connection 2-wire Ambient temperature w.terminal block w. transmitter Process temperature -50...400°C Protection class IP65 Humidity <100% RH, condensing Vibrations GL, test 2 Pressure -40...160°C -40...85°C Bar 50 40 30 <1 60 > 200 mm mm > 300 mm 20 10 0 100 200 300 400 500 °C Response time °C 100 80 1 2 3 60 40 1: Sensor without thermowell (Embedded sensor) 20 3: Sensor with thermowell, without thermal compound 2: Sensor with thermowell, with thermal compound 0 1 2 3 4 5 6 7 8 9 10 Minutes Note: When a pocket is used, the time delay increases. The delay is the time duration for the sensor to reflect the correct temperature after a sudden temperature change in the media. www.baumer.com Data sheet B12.04-TCR6 Page 1 / 6 Design and specifications subject to change without notice DIN form B, Aluminium EN/2015-01-30 Technical specification Housing CombiTemp TCR6 Standard RTD temperature sensor Dimensions (mm), connection diagram and construction details Embedded sensor 76 Not with replaceable sensor 70 M20 Faster response time see page 1 M16 Ceramic terminal block Cable sensor insert Temperature transmitter Pt100 Double element 2-w 3-w Pt100 2-w 3-w 4-w White White Red Pt100 Red Pt100 White White Red 4-w 2-w 2-w Red - + 4...20 mA Transmitter, type FlexTop 2202 - Standard Transmitter, type FlexTop 2221 - Standard Input Pt100 Input Pt100 / Pt1000 (universal) Output Accuracy Input Output 4...20 mA 4...20 mA / HART <0.25°C <0.1% signal span (16mA) Output Accuracy Input Output Range Minimum span -200...850°C 25°C Range Minimum span -200...850°C 25°C Supply 8...35 VDC Supply 8...35 VDC Programmability By FlexProgrammer 9701 Programmability By FlexProgrammer 9701 By HART terminal/modem For further information please see data sheet for FlexTop 2202 Transmitter, type FlexTop 2211 - Performance Input Pt100 / Pt1000 (universal) Output Accuracy Input Output 4...20 mA Range Minimum span -200...850°C 25°C Supply 8...35 VDC Programmability By FlexProgrammer 9701 <0.1°C <0.1% signal span (16mA) For further information please see data sheet for FlexTop 2221 <0.1°C <0.1% signal span (16mA) EN/2015-01-30 For further information please see data sheet for FlexTop 2211 Design and specifications subject to change without notice Single element www.baumer.com Data sheet B12.04-TCR6 Page 2 / 6 CombiTemp TCR6 Standard RTD temperature sensor ATEX data for temperature transmitters Transmitter, type FlexTop 2221 - ATEX Transmitter, type FlexTop 2202 - ATEX Approval Ex ia IIC T5/T6, ATEX II 1G Ex nA II T5, ATEX II 3G Approval Ex ia IIC T5/T6, ATEX II 1G Ex nA II T5, ATEX II 3G Supply 8...28 VDC Supply 8...30 VDC (Ex nA : 12...30 VDC) Internal inductivity Internal capacity Li ≤ 10 µH Ci ≤ 10 nF T1...T5: -40 <Tamb < 85°C T6: -40 <Tamb < 50°C Internal inductivity Internal capacity Li ≤ 15 µH Ci ≤ 5 nF T1...T5: -40 <Tamb < 85°C T6: -40 <Tamb < 50°C Temperature class U: ≤ 28 VDC I: ≤ 0.1A P: ≤ 0.75 W Barrier data Temperature class U: ≤ 30 VDC I: ≤ 0.1A P: ≤ 0.75 W Barrier data Transmitter, type FlexTop 2211 - ATEX Approval Ex ia IIC T5/T6, ATEX II 1G Ex nA II T5, ATEX II 3G Supply 6.5...30 VDC Internal inductivity Internal capacity Li ≤ 1 5 µH Ci ≤ 5 nF T1...T5: -40 <Tamb <85°C T6: -40 <Tamb <50°C Temperature class U: ≤ 30 VDC I: ≤ 0.1A P: ≤ 0.75 W Barrier data Rotating male nipple Rotating female union 10 12...18 33...36 23...24 A A Connection Code A A/F L Without 10 5 Ø18 20...3.000 G½, R½ 12/13 10 22.0 20...3.000 M18, M20 16/17 10 22.0 20...3.000 ½" NPT 18 10 22.0 20...3.000 G½ nipple 33 38 27.0 20...3.000 G¾ nipple 35 38 32.0 20...3.000 G1 nipple 36 38 36.0 20...3.000 G½ union 23 38 27.0 20...3.000 G¾ union 24 38 32.0 20...3.000 Standard Tip L L L L A Nipple male A Tube without connection Fast response tip Ø4 mm Ø6, Ø8, Ø10 EN/2015-01-30 Ø6, Ø8, Ø10 Design and specifications subject to change without notice Dimensions (mm) for process connections and immersion tube www.baumer.com Data sheet B12.04-TCR6 Page 3 / 6 CombiTemp TCR6 Standard RTD temperature sensor Ordering details TCR6 TCR6 – xxxx Model Standard temperature sensor, CombiTemp TCR6 x x . x x xx . x x xx . xxxx ±0.25°C ±0.10°C ±0.10°C . 0 1 2 3 4 0 1 3 0 1 0 1 2 5 6 7 8 A B C J K 2-wire 4-wire 2x2-wire 4-wire, Ø8 4-wire, Ø8 4-wire, Ø8 4-wire, Ø8 mm mm mm mm only only only only sensor sensor sensor Pt100, Pt100, Pt100, Pt100, element element element 1/1 DIN B 1/3 DIN B 1/6 DIN B 1/1 DIN A . 1 2 4 A B C D 0 1 2 3 10 12 13 16 17 18 33 35 36 23 24 DIN3852 form A ISO 7/1 ISO 261 ISO 261 ANSI/ASME B1.20.1 ISO 228/1 incl. NBR gasket ISO 228/1 incl. NBR gasket ISO 228/1 incl. NBR gasket ISO 228/1 incl. NBR gasket ISO 228/1 incl. NBR gasket Design and specifications subject to change without notice G½ R½ M18×1.5 M20×1.5 ½"NPT-14 G½ G¾ G1 G½ G¾ . Seal No seal NBR gasket Sensor diameter Ø6.0 mm Ø8.0 mm Ø10 mm Sensor tip Standard Fast 0 1 (-40...108°C) for rotating nipple and union only 5 6 8 Welded Welded Welded Normal response Fast response Not for cable sensor Ø4 mm - Max. 300 mm Sensor tube length Length in mm (e.g. 60 mm = 0060) www.baumer.com 10 20 . xxxx Data sheet B12.04-TCR6 Page 4 / 6 EN/2015-01-30 Sensor insert type Embedded Embedded Embedded Cable sensor Cable sensor Cable sensor Cable sensor Cooling neck None 71 mm 142 mm 213 mm Process connection Tube without connection Nipple, male Nipple, male Nipple, male Nipple, male Nipple, male Rotating male nipple Rotating male nipple Rotating male nipple Rotating female union Rotating female union x – 1520 1620 1720 Pt100 output Pt100 output 4…20 mA 4…20 mA 4…20 mA + HART® x TCR6 Electrical connection Cable gland, M16 Cable gland, M16, shielded Cable gland, M20 (standard) Terminal block/Transmitter Flying leads Ceramic terminal block FlexTop 2202 FlexTop 2211 FlexTop 2221 Safety Standard ATEX, ia (pending) ATEX, nA (pending) Configuration No configuration Configuration of range Sensor element None (for Cable Sensor) 1 × Pt100 Cl. B 2 × Pt100 Cl. B 1 × Pt100 Cl. 1/3 B 2 × Pt100 Cl. 1/3 B 1 × Pt100 Cl. 1/6 B 2 × Pt100 Cl. 1/6 B 1 × Pt100 Cl. A 2 × Pt100 Cl. A 1 × Pt100 Cl. B < 600°C 1 × Pt1000, cl. B 1 × Pt1000, cl. 1/3 B . Thermowell for TCR6 Type ZPT4 Main features Stainless steel, AISI 316 Robust design Applications For threaded process connection - Ø6 and Ø8 sensor For hygienic process connection - Ø6 sensor Dimensions (mm) Threaded industrial type Hygienic type L Instrument length, up to 3 m FeG½ A/F 27 mm E R½, G½A, G¾A or M20×1,5 D Ø10 or Ø12 mm d Ø8 or Ø10 mm U Insertion length L Instrument length, up to 3 m FeG½ A/F 25 mm E Clamp, ISO 2852 DN 38 D Ø10 mm d Ø8 mm U Insertion length Ordering details ZPT4 Length (L) mm (60 mm = 0060) www.baumer.com xxxx ZPT4 Design and specifications subject to change without notice Instrument connection Female thread G½ Process connection R½ (½" BSPT) G½ G¾ M20x1.5 Clamp ISO 2852 DN 25/DN38 Material Stainless steel AISI 316L/1.4404 Sensor diameter Ø6 (outside Ø10 mm) Ø8 (outside Ø12 mm) ZPT4 – 5 xx 6 x . 5 14 15 34 54 38 6 5 7 . 0000 EN/2015-01-30 Model Thermowell Data sheet B12.04-TCR6 Page 5 / 6 Accessories Mounting accessories: Compression gland, type ZPB1 Thread size as per below Specifications for compression gland, type ZPB1 Material Stainless steel, AISI 316 Sensor diameter Ø 6mm Ø 6 sensor Ordering details for compression gland ZPB1 – 0 14 65 Model Compression gland ZPB1 Material AISI 316 for Ø6 mm sensor Process connection G½A Ventilation duct flange, Ø8 mm sensor only Material Stainless steel, AISI 316 Sensor diameter Ø 8mm 0 14 65 Dimentions for ventilation duct flange Ventilation duct flange Order : ZPX1-002 Ø 54.5 Ø 8.1 Ø5 Ordering details Model Duct flange Ordering details for thermal compound Model 6 gram in plastic bag ZPX1-001 EN/2014-08-25 Recommended within the temperature range of -40 ... +180 °C Design and specifications subject to change without notice Thermal compound ZPX1.002 www.baumer.com Data sheet B12.04-TCR6 Page 6 / 6