M610x Series Stratum III HCMOS/Clipped Sinewave

Introduces
M610x Series Stratum III
HCMOS/Clipped Sinewave TCXO/TCVCXO
Features:
Stratum 3 performance with hold-over stability (0.32 ppm) over wide
industrial temperature range (-40 °C to +85 °C)
3.0 V, 3.3 V and 5.0 V versions
Wide frequency range 8-52 MHz
Low phase noise
Excellent G-sensitivity performance: 1.5 ppb/G
Tri-state function
Applications:
 Telecommunications such as SONET / SDH / SERDES / GSM / CDMA
 3G and 4G
 Gig-Ethernet
 10G and 40G systems
MtronPTI
Corporate Headquarters
100 Douglas Avenue
PO Box 630
Yankton, SD 57078-0630
1-800-762-8800
www.mtronpti.com
Applications Note
M610x Series Stratum III
HCMOS/Clipped Sinewave TCXO/TCVCXO – 3.0/3.3/5.0 Volt – 5x7 mm
MtronPTI’s M610x Series Stratum 3 TCXO’s and TCVCXO’s provide network and wireless engineers with
low voltage, surface mount products with tight stability over temperature and time. MtronPTI’s unique approach to crystal compensation enables these devices to achieve Stratum 3 temperature stability including holdover over -40 C to +85 C. Specially processed crystals enable the M610x to achieve consistent
long-term stability and minimal frequency shift after reflow. Our processing also enables us to achieve
excellent g-sensitivity (1.5 ppb/g). The low phase noise (-155 dBc/Hz at 100 kHz for a 10 MHz TCXO)
makes the M610x ideal for those design engineers working on high data-rate, low BER data communication network products. This phase noise is the lowest available in the market.
The M610x Series is ideally suited for a wide range of applications such as SONET, SDH, SERDES, GSM,
CDMA, 3G, 4G, Gig-Ethernet, 10G and 40G systems.
Standard output for the M610x series is HCMOS compatible or clipped sinewave and draws as little as 1.5
mA with a 3.3 volt supply at 13 MHz. This low power consumption provides an advantage over similarly
specified ovenized oscillators for power-sensitive applications.
The M610x series offers ±9.2 ppm minimum pull range with excellent tuning linearity performance for critical PLL applications. This series is available in frequencies from 8 to 52 MHz, and is offered in a ceramic
surface mount platform with industry standard 5 x 7 mm footprint.
Figure 1. Typical Test Circuit
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.
2
M610x Series Stratum III HCMOS/Clipped Sinewave TCXO/TCVCXO – 3.0/3.3/5.0 Volt – 5x7 mm
Product Specifications
Product Features:
•
•
•
•
•
•
Stratum III performance with hold-over stability (0.3 ppm) over wide industrial temperature range (-40 °C to +85 °C)
3.0 V, 3.3 V and 5.0 V versions
Wide frequency range 8-52 MHz
Low phase noise
Excellent G-Sensitivity performance: 1.5 ppb/G
Tri-state Function
Description:
MtronPTI’s M610x Series Stratum 3 TCXO’s and TCVCXO’s provide network and wireless engineers with low voltage, surface
mount products with tight stability over temperature and time. MtronPTI’s unique approach to crystal compensation enables
these devices to achieve Stratum 3 temperature stability including holdover over -40 C to +85 C. Specially processed crystals enable the M610x to achieve consistent long-term stability and minimal frequency shift after reflow. Our processing also
enables us to achieve excellent g-sensitivity (1.5 ppb/g). The low phase noise (-155 dBc/Hz at 100 kHz for a 10 MHz TCXO)
makes the M610x ideal for those design engineers working on high data-rate, low BER data communication network products.
This phase noise is the lowest available in the market.
Applications:
•
•
•
•
Telecommunications such as SONET / SDH / SERDES / GSM / CDMA
3G, 4G
Gig-Ethernet
10 G and 40 G Systems
Ordering Information:
Part Number Example:M610x
1
S
T
C
N
40.000000MHz
Part Number Example: M6101STCN – 40.000000 MHz
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.
3
M610x Series Stratum III HCMOS/Clipped Sinewave TCXO/TCVCXO – 3.0/3.3/5.0 Volt – 5x7 mm
Performance Characteristics:
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.
4
M610x Series Stratum III HCMOS/Clipped Sinewave TCXO/TCVCXO – 3.0/3.3/5.0 Volt – 5x7 mm
Product Dimensions & Pinout Information:
Handling Information:
Although protection circuitry has been designed into the M610x TCXO/TCVCXO, proper precautions should be taken
to avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body
model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation.
ESD voltage thresholds are dependent on the circuit parameters used to define the mode. Although no industrywide standard has been adopted for the CDM, a standard HBM (resistance = 1500, capacitance = 100 pF) is widely
used and therefore can be used for comparison purposes. The HBM ESD threshold presented here was obtained
using these circuit parameters.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.
5
M610x Series Stratum III HCMOS/Clipped Sinewave TCXO/TCVCXO – 3.0/3.3/5.0 Volt – 5x7 mm
Solder Profile:
Quality Parameters:
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.
6
M610x Series Stratum III HCMOS/Clipped Sinewave TCXO/TCVCXO – 3.0/3.3/5.0 Volt – 5x7 mm
Tape and Reel Specifications:
(all measurements
are in mm)
M610x
A
B
C
D
E
F
G
H
J
K
L
M
N
5.40
7.40
1.55
7.50
2.60
2.00
4.00
16.00
330
13.00
20.20
100
16.40
Standard Tape and Reel: 1000 parts per reel
Output Waveform
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.
7
M610x Series Stratum III HCMOS/Clipped Sinewave TCXO/TCVCXO – 3.0/3.3/5.0 Volt – 5x7 mm
Yankton
Orlando
PO Box 630
Yankton, SD 57078-0630 USA
Phone: 605-665-9321
Toll Free: 800-762-8800
Fax: 605-665-1709
Email: [email protected]
2525 Shader Rd
Orlando, FL 32804 USA
Phone: 407-298-2000
Fax: 407-293-2979
Email: [email protected]
Santa Clara
Connecticut
1495 Franklin Street
Santa Clara, CA 95050 USA
Phone: 408.395.0700
Fax: 408.395.8074
Email: [email protected]
755 Main Street
Suite 2B, Building 2
Monroe, CT 06470 USA
Phone: 800.762.8800
Fax: 203.452.9435
Email: [email protected]
Asia Pacific
Europe
1104 Shanghai Industrial
Investment Building
48-62 Hennessy Road
Wanchai, Hong Kong, China
Phone: 852-2866-8023
Fax: 852-2529-1822
Email: [email protected]
The Netherlands
Phone: 31-40-368-6818
Fax: 011-31-40-368-3501
Email: [email protected]
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.
8