LT-Series Toggle Switches The LT-Series illuminated toggle switches feature up to a three-color lighting sequence from a single lamp. These lighted toggles contain neoprene bushing seals for dust and moisture protection and provide a simple way to dress-up most any Marine or Transportation industry panel. A variety of circuits and terminations are available. Carling Technologies, Inc. 60 Johnson Avenue • Plainville, CT 06062-1177 Phone: (860) 793-9281 • Fax: (860) 793-9231 Email: [email protected] • www.carlingtech.com 2 | LT-Series Toggle Switches Dielectric Strength Mechanical Life 1000V - live to dead metal parts 100,000 cycles Electrical Life Operating Temperature 50,000 cycles - maintained 25,000 cycles - momentary 32°F to 185°F (0°C to 85°C) LT-1561 1 Base Part Number 2 Actuator Style 1 BASE PART NUMBER: SERIES/POLES/ILLUMINATION/ CIRCUITRY/RATING/TERMINATION5 10A 250VAC, 15A 125VAC, 3/4 HP 125-250VAC, 15A 15-28VDC Single Pole Solder Lug .250 Tab QC .187 Tab QC Wire Leads On-None-Off LT-1510 LT-1511 LT-1514 LT-1515 On-None-(Off) LT-1520 LT-1521 LT-1524 LT-1525 (On)-None-Off LT-1530 LT-1531 LT-1534 LT-1535 On-None-On LT-1540 LT-1541 LT-1544 LT-1545 On-None-(On) LT-1550 LT-1551 LT-1554 LT-1555 On-Off-On LT-1560 LT-1561 LT-1564 LT-1565 On-Off-(On) LT-1570 LT-1571 LT-1574 LT-1575 (On)-Off-(On) LT-1580 LT-1581 LT-1584 LT-1585 Double Pole Solder Lug .250 Tab QC .187 Tab QC Wire Leads On-None-Off LT-2510 LT-2511 LT-2514 LT-2515 On-None-(Off) LT-2520 LT-2521 LT-2524 LT-2525 (On)-None-Off LT-2530 LT-2531 LT-2534 LT-2535 On-None-On LT-2540 LT-2541 LT-2544 LT-2545 On-None-(On) LT-2550 LT-2551 LT-2554 LT-2555 On-Off-On LT-2560 LT-2561 LT-2564 LT-2565 On-Off-(On) LT-2570 LT-2571 LT-2574 LT-2575 (On)-Off-(On) LT-2580 LT-2581 LT-2584 LT-2585 2 ACTUATOR STYLE Paddle1 1 Clear Paddle 4 Solid Color Paddle Snapkap Style2 5 Bright Chrome 6 Satin Chrome 7 Black Molded Notes: 1 Solid color paddle available with lighting sequence 01, 02, 10 or 20. 2 SnapKap Toggle Lenses are available separately. Consult factory. 3 Independent lamp is standard. Dependent lamp with ON-OFF function (including momentary) is available with Lighting Sequences 10, 20, 30, 40 and 50. (No light in OFF position.) 4 Green and blue not recommended with 125 volt or 250 volt neon lamps. 5 Additional terminations available. Consult factory for details. ( ) Indicates momentary function. 1 30 012 3 Lighting Sequence 4 Lamp Voltage 3 LIGHTING SEQUENCE3,4 position 1 01red 02amber 03green 10red 11red 12red 13red 14red 15red 20amber 21amber 22amber 23amber 24amber 25amber 30green 31green 32green 33green 34green 35green 40blue 41blue 42blue 43blue 44blue 45blue 50clear 51clear 52clear 53clear 54clear 55clear .274[6.96] DIA .379[9.63] incandescent 006 6 volt 012 12 volt 018 18 volt 024 24 volt .168[4.27] DIA LENS neon 125N 250N .075[1.91] DIA .394[10.00] .250[6.35] .187[4.74] .141[3.58] SNA SINGLE OLE A TOGGLES 5 67 .750[19.05] DOUBLE OLE .270[6.86] .250[6.35] TOGGLE ST LES 1 4 .625[15.87] .187[4.75] .350[8.89] SCRE (ASSE BLED) .062[1.57] .187[4.75] .500[12.70] .286[7.26] 1.088[27.64] E 6.000[152.40] .370[9.39] 1.375[34.92] .187 TAB (Q.C.) TER INAL T #6-32NC-2 THREAD .422[10.72] .055[1.40] DIA .250 TAB (Q.C.) .890[22.61] .715[18.16] 125 volt neon 250 volt neon .437[11.09] SOLDER LUG .038[.965] D .865[21.97] .330[8.38] .187[4.74] E A .072[1.82] position 3 red amber green none red amber green blue clear none red amber green blue clear none red amber green blue clear none red amber green blue clear none red amber green blue clear 4 LAMP VOLTAGE4 .125[3.18] DIA 15/32-32UNS-2A THREAD position 2 red amber green --- clear clear clear clear clear --- clear clear clear clear clear --- clear clear clear clear clear --- clear clear clear clear clear --- clear clear clear clear clear IRE LEAD .500[12.70] DIA RINTED CIRCUIT MOUNTING HOLE .038[9.65] *Manufacturer reserves the right to change product specification without prior notice. REV_SW_LT_0912 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: [email protected] • www.carlingtech.com