Rocker Switches LTA-Series The LTA-Series Mini Tippette Snap-in rocker switches are illuminated, single pole and double-insulated. These AC rated switches are also suitable for low voltage DC applications. A variety of actuators, colors and terminations can be specified with ratings up to 20 amps. Specifications •Certifications*: UL, CSA •Dielectric Strength: 1,000V (minimum) •Insulation Resistance: 100 Megohms (minimum) •Base Material: Nylon •Actuator Material: Nylon or Polycarbonate •Bezel Material: Nylon * Due to ongoing technological advances, consult factory for certification specifics. Dimensional Specifications: in. [mm] .055[1.40] DIA .156[3.96] DIA .069[1.75] DIA 6.000[152.40] .375[9.52] .250[6.35] .250[6.35] .250[6.35] .500[12.70] .250[6.35] .390[9.77] .187[4.74] .050[1.27] INTEGRATED WIRE LEAD (no exposed conductors) .187 TAB (Q.C.) SOLDER LUG .250 TAB (Q.C.) TERMINAL TYPE .550[13.97] .860[21.84] .375[9.52] .520 [13.20] .544[13.81] 1.125[28.57] .275[6.98] .890[22.60] 1.120[28.44] PADDLE LTA 20 1 T - SHORT PADDLE R - B MOUNTING HOLE Panel Thickness: .020[.508] min. to .250[6.35] max. / 125N - SERIES RATING TERMINATION ACTUATOR COLOR LENS COLOR2,3 LTA OFF-NONE-ON SINGLE POLE 10 5A 250VAC 10A 125VAC 1/2HP 125-250VAC 11 5A 250VAC 10A 125VAC 5A (TUNGSTEN) 125VAC L 20 10A 250VAC 15A 125VAC 3/4HP 125-250VAC 21 10A 250VAC 15A 125VAC 22 10A 250VAC 15A 125VAC 20A 125-250VAC H 3/4HP 125-250VAC 0 1 3 5 ROCKER A AMBER C CLEAR G GREEN3 R RED A C G LU R PADDLE1 B BLACK W WHITE LAMP VOLTAGE SOLDER LUG .250 TAB (QC) .187 TAB (QC) WIRE LEAD ACTUATOR STYLE P PADDLE PS PADDLE - SHORT T LIGHTED ROCKER 6V 1 BASE COLOR B BLACK W WHITE AMBER CLEAR GREEN BLUE RED 6 VOLT/ INCANDESCENT 12V 12 VOLT/ INCANDESCENT 18V 18 VOLT/ INCANDESCENT 24V 24 VOLT/ INCANDESCENT 28V 28 VOLT/ INCANDESCENT 125N 125 VOLT/ NEON 250N 250 VOLT/ NEON NOTES: Shading indicates standard configurations. Stainless steel bezels are available. Add suffix “BEZEL” to the end of the catalog number. (ex.) LTA201-TR-B/12V/BEZEL Imprinting is available. Please specify when ordering. Panel Cut-Out Recommendations: For sheet metal panels, switch must enter panel in same direction as the punch. (Burr on bottom.) Test cut hole in actual material. 1 Custom colors are available. Consult factory. 2 Neon lamps (125 volt or 250 volt) not recommended with green or blue colored indicators. 3 Specify lens color only if actuator style is P or PS. Carlingswitch,Inc. (860) 793-9281• Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277 35