LP-Series Illuminated Indicators The LP-Series Illuminated Indicators are the perfect complement to the aesthetics, reliability and performance of our L-Series rocker switches. As a critical safety feature, the illumination alerts the operator of essential system functions or malfunctions, such as: Oil Pressure, High Temperature, Transmission or other fluid levels, Parking Brake or General System confirmations. The L-Series styling assures seamless integration into most any dashboard panel to meet the needs of todayʼs Off Highway, Heavy Vehicle, Marine, Appliance and Industrial Control markets. Dimensional Specifications in. [mm.]: General Specifications: Electrical Terminals . . . . . . . . . . . . Brass or copper/silver plate 3/16” (4.76mm) & 1/4” (6.3mm) Quick Connect terminations standard. Lighted . . . . . . . . . . . . . . Incandescent - rated 10,000 hours LED - rated 100,000 hours 1/2 life (LED is internally ballasted for voltages to 24VDC) Physical Seals . . . . . . . . . . . . . . . Insert, base & bracket are sealed. Base . . . . . . . . . . . . . . . Nylon 66 GF rated to 85°C with a flammability rating of 94VO. Insert . . . . . . . . . . . . . . . . Polycarbonate rated at 100°C. Connector . . . . . . . . . . . . Nylon 66 rated at 85°C. Polarized Markings . . . . . . . . . . . . . Over 1000 pad printed or laser etched legends available Bracket. . . . . . . . . . . . . . . Nylon 66 GF rated to 85°C Environmental Environmental . . . . . . . . . IP67, representing an index of protection as applied to electrical equipment in accordance with IEC 529, BS 5490, DIN 400 50 & NFC 20 010. Corrosion Resistance . . . Mixed Flowing Gas MFG Class III per ASTM B-827 & B-845, Method H, with 3 years exposure. Operating Temperature . . . -40°C to +85°C 38 Vibration 1 . . . . . . . . . . . Per Mil-Std 202F, Method 204D Test Condition A 0.06 DA or 10Gʼs 10500 Hz. Tested with VCH connector. Test criteria - No loss of circuit during test and pre and post test contact resistance. Vibration 2 . . . . . . . . . . . Resonance search 24-50 Hz 0.40 DA 50-2000 ±10 Gʼs peak Results Horizontal Axis 3-5 Gʼs max. Random 24 Hz 0.06 PSD-Gsq/Hz 60 Hz 0.50 100 Hz 0.50 200 Hz 0.025 2000 Hz 0.025 No loss of circuit during test; <10µ chatter. Shock . . . . . . . . . . . . . . . Per Mil-Std 202F, Method 213B, Test Condition K @ 30Gʼs. Tested with VCH connector. Test criteria No loss of circuit during test, pre, and post test contact resistance. Salt Spray . . . . . . . . . . . . Per Mil-Std 202F, Method 101D, Test Condition A, 48 Hrs. Thermal Shock . . . . . . . . Per Mil-Std 202F, Method 107F, Test Condition A, -55°C to 85°C. Test criteria - pre and post test contact resistance. Moisture Resistance . . . . Per Mil-Std 202F, Method 106F, Test Criteria - pre and post test contact resistance. www.carlingtech.com LP-Series Illuminated Indicators LP 1 H R R 5 - 9 A A - Y2 1 DU 2 3 4 Termination Illumination Lamp 1 Series 1 SERIES LP 5 Lamp 6 Bracket Color 7 Insert Color L-Series Illuminated plug .250 (8.35) x .032 (0.51) Quick Connect .187 (4.75) x .032 (0.51) Quick Connect 3 ILLUMINATION LAMPS A 1 B 1 2 C 1 2 E 1&2 H 1&2 ILLUMINATION – – – – – Parallel Series LAMP WIRED TO TERMINALS 10 (+) 8 (–) 10 (+) 8 (–) 12 (+) 11 (–) 10 (+) 8 (–) 12 (+) 8 (–) 10 (+) 8 (–) 10 (+) 8 (–) LAMP 1 LOCATED ABOVE TERMINALS 9 & 10 END OF BRACKET. LAMP 2 LOCATED ABOVE TERMINALS 11 & 12 END OF BRACKET. POSITIVE (+) AND NEGATIVE (–) SYMBOLS APPLY TO LED LAMPS ONLY. No lamp Incandescent LED 2VDC 6VDC 12VDC 24VDC 0 (position 5 only) 4 3V 5 6V Amber Green L F M G N H P J 6 BRACKET COLOR Black 6 12V Red R S T V 7 18V NOTES 1 To order separately, specify LPC and selection 7 code. Ex LPC-9 2 For LEDs, insert color must be clear, white or match color of LED. 3 For connector, specify part number LC2-01 (.187 tabs), LC3-01 (.250 tabs). www.carlingtech.com 12 Legend 2 9 A B C D E F Painted Black - Laser Etch Clear (Transparent) White (Translucent) Red (Translucent) Amber (Translucent) Green (Translucent) Blue (Translucent) Z 5 A Not Painted (used with INSERT COLORS A-F) Clear Laser Etch Background Color (used with INSERT COLOR 9) White Laser Etch Background Color (used with INSERT COLOR 9) 10 LEGEND OVER LAMP 1 00 __ No legend Laser Etched or Body Legends For legend options & codes, see pages 54-65 of this catalog. 11 LEGEND ORIENTATION 0 1 2 3 4 8 24V 5 11 Legend Orientation 8, 9 STYLE (same coding for both selections) 4,5 LAMP (same coding for both selections)2 Selection 4: specifies lamp 1 located above terminals 10 (+) & 9 (-). Selection 5: specifies lamp 2 located above terminals 12 (+) & 11 (-). 10 Legend 1 7 INSERT COLOR1,2 2 TERMINATION3 1 2 9 Style 8 Style No legend Orientation 1 Orientation 2 Orientation 3 Orientation 4 4F MC MA 4F100 MA3MC MA MC MA1MC 12 LEGEND OVER LAMP 2 00 __ No legend Laser Etched or Body Legends For legend options & codes, see pages 54-65 of this catalog. 39