Specifications - Carling Technologies

Rocker Switches
RGSC-Series
The RGSC-Series Super Curvette rocker
switches offer the Curvette styling in a
double pole construction with higher
electrical ratings and high inrush
capabilities. These switches can handle
up to 125 amp peak inrush current and
can accommodate a wide range of panel
cutouts due to the patented mounting
ear construction. International ratings
are available up to 20 amps.
•Certifications*: UL, CSA, VDE
•Dielectric Strength: 1,000V (minimum)
•Insulation Resistance: 100 Megohms
(minimum)
•Base Material: Nylon
•Actuator Material: Nylon
* Due to ongoing technological advances, consult factory for
certification specifics.
.125[3.18]
X
.150[3.81]
Dimensional Specifications: in. [mm]
19°
6.000[152.40]
.275[6.99]
.250[6.35]
1.012[25.70]
.500[12.70]
.187[4.75]
PADDLE
.250 TAB (Q.C.)
1.145[29.08]
SOLDER LUG
1.181[30.00]
.215[5.46]
1.240[31.50]
WIRE LEAD
TERMINAL TYPE
.784[19.91]
.080[2.03]
Specifications
1.125[28.58]
+.000[.00]
-.004[.10]
+.004[.10]
-.000[.00]
.866[22.00]
TEST CUT
HOLE IN
ACTUAL
MATERIAL
.872[22.15]
TEST CUT
HOLE IN
ACTUAL
MATERIAL
1.000[25.4]
1.180[29.97]
1.072[27.23]
.375[9.53]
1.070[27.17]
RGSC
SERIES
RGSB
RGSE
STANDARD
BASE
METAL
BRACKET
EUROPEAN
BASE
RGSC
MOUNTING HOLE
Panel Thickness: .025 min - .187 max.
Specific cutout dimension range dependent
on panel thickness and material.
1.086[27.58]
RGSC
1.176[29.87]
RGSC
RGSE
.725[18.42]
RGSE
C
70
1
-
R -
B
-
B
-
0
CIRCUIT1
RATING2
ACTUATOR STYLE
BASE COLOR3
A
20 15A 250VAC
20A 125VAC
3/4HP 125-250VAC
21 15A 250 VAC
20A 125VAC
57 10A 250VAC 3/4HP
15A 125VAC 3/4HP
6A 277VAC 3/4HP
70 15A 250VAC
20A 125VAC
3/4HP 125-250VAC
16(6)A 250VAC T85
71 15A 250VAC
20A 125VAC
16(6)A 250VAC T85
P
R
B BLACK
W WHITE
B
C
D
E
F
OFF-NONE-ON
SINGLE POLE
ON-NONE-ON
SINGLE POLE
OFF-NONE-ON
DOUBLE POLE
ON-NONE-ON
DOUBLE POLE
POLE 1
ON-NONE-ON
POLE 2
OFF-NONE-ON
POLE 1
ON-NONE-OFF
POLE 2
OFF-NONE-ON
TERMINATION
0
1
5
PADDLE
ROCKER
ACTUATOR COLOR3
B BLACK
W WHITE
ROCKER FACE
IMPRINTED
LEGEND4
0 NO LEGEND
A OFF-ON (VERTICAL)
B OFF-ON
(HORIZONTAL)
D O-I (HORIZONTAL)
E O-I (VERTICAL)
F ON-OFF (VERTICAL)
G ON-OFF
(HORIZONTAL)
SOLDER LUG
.250TAB (QC)
WIRE LEAD
NOTES:
Shading indicates standard configurations.
Panel Cut-Out Recommendations: For sheet metal panels, switch must enter panel in same direction as the punch. (Burr on bottom.) Test cut hole in actual material.
1
Circuits E and F available with Rating Codes 20, 21 and 57 only.
2
Additional ratings are available. Consult factory.
3
Custom colors are available. Consult factory.
4
White is standard with dark actuators; black is standard with light actuators.
Carlingswitch,Inc. (860) 793-9281• Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277
29