Rocker Switches LS-Series The LS-Series Softspot illuminated rocker switches feature a three-color high brightness light sequence, from a single lamp. These switches are designed with a standard nylon snap-in bracket and “Drip-Dry” construction that protects the front panel from dust and moisture. Specifications •Dielectric Strength: 1,000 V (minimum) •Insulation Resistance: 100 Megohms (minimum) •Base Material: Phenolic •Actuator Material: Polycarbonate .075[1.91] DIA .125[3.18] DIA .055[1.40] DIA Dimensional Specifications: in. [mm] .330[8.38] .437[11.09] .394[10.00] .250[6.35] .187[4.74] 1.700[43.18] 1.190[30.22] .187[4.74] .680[17.27] SOLDER LUG .250 TAB (Q.C.) .187 TAB (Q.C.) .960[24.38] .830[21.08] TERMINAL TYPE 55° 4 plcs* .150[3.81] DIA 1.450[36.83] #6-32NC-2 THREAD 6.000[152.40] .187[4.75] .141[3.58] .370[9.39] .372[9.45] 1.084[27.53] MOUNTING HOLE (Nylon Snap-in Brackets) Panel Thickness: .040 min. - .250 max. Switch should be mounted at 90° for maximum water shedding (45° to 90° acceptable) .187[4.75] .500[12.70] .286[7.26] .350[8.89] SCREW (ASSEMBLED) PRINTED CIRCUIT WIRE LEAD .422[10.72] * Angled corners are suggested for optimum fit. Standard rectangular cutout is acceptable. LS 1 5 6 SERIES CIRCUIT LS LIGHTED ROCKER 1 2 3 4 5 6 7 8 POLES 1 SINGLE RATING 5 10A 250VAC 15A 125VAC 3/4HP 125-250VAC 1 - ON-NONE-OFF ON-NONE-(OFF) (ON)-NONE-OFF ON-NONE-ON ON-NONE-(ON) ON-OFF-ON ON-OFF-(ON) (ON)-OFF-(ON) TERMINATION 0 1 3 4 5 6 SOLDER LUG .250TAB (QC) .187TAB (QC) SCREW TERM. WIRE LEAD PC TERM. NOTES: Shading indicates standard configurations. Panel Cut-Out Recommendations: For sheet metal panels, switch must enter panel in same direction as the punch. (Burr on bottom.) Test cut hole in actual material. 1 Independent lamp is standard. Dependent lamp with ON-OFF function (including momentary) is available with Lighting Sequences 10, 20, 30, 40 and 50. No light in OFF position. 2 Matte finish is standard. Custom colors are available. Consult factory. 3 Green and blue not recommended with 125 volt or 250 volt neon lamps. 13 - BL LIGHTING SEQUENCE 01 02 03 10 11 12 13 14 15 20 21 22 23 24 25 30 31 POS 1 POS 2 RED RED AMBER AMBER GREEN GREEN RED ----RED CLEAR RED CLEAR RED CLEAR RED CLEAR RED CLEAR AMBER ----AMBER CLEAR AMBER CLEAR AMBER CLEAR AMBER CLEAR AMBER CLEAR GREEN ----GREEN CLEAR ROCKER COLOR2 BL BLACK WH WHITE BRACKET COLOR2 BL BLACK WH WHITE - BL - 012 1,3 POS 3 RED AMBER GREEN NONE RED AMBER GREEN BLUE CLEAR NONE RED AMBER GREEN BLUE CLEAR NONE RED 32 33 34 35 40 41 42 43 44 45 50 51 52 53 54 55 POS 1 GREEN GREEN GREEN GREEN BLUE BLUE BLUE BLUE BLUE BLUE CLEAR CLEAR CLEAR CLEAR CLEAR CLEAR POS 2 CLEAR CLEAR CLEAR CLEAR ----CLEAR CLEAR CLEAR CLEAR CLEAR ----CLEAR CLEAR CLEAR CLEAR CLEAR POS 3 AMBER GREEN BLUE CLEAR NONE RED AMBER GREEN BLUE CLEAR NONE RED AMBER GREEN BLUE CLEAR LAMP VOLTAGE3 006 012 018 024 125 250 6V/ INCANDESCENT 12V/ INCANDESCENT 18V/ INCANDESCENT 24V/ INCANDESCENT 125V/ NEON 250V/ NEON Carlingswitch,Inc. (860) 793-9281• Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277 43