Rocker Switches LR-Series The LR-Series Curvette single pole illuminated miniature snap-in rocker switches are available with a rocker or paddle actuator. These lighted switches are available in a number of lamp voltages with internationally approved current ratings up to 16 amps. Due to the patented mounting ear design, these switches are compatible with a wide range of standard panel cutouts. Specifications •Certifications*: UL, CSA, VDE, SEMKO, DEMKO, NEMKO, FIMKO, SEVand BEAB •Dielectric Strength: 1,000V (minimum) •Insulation Resistance: 100 Megohms (minimum) •Base Material: Nylon •Actuator Material: Translucent Nylon or Polycarbonate * Due to ongoing technological advances, consult factory for certification specifics. .125[3.18] DIA Dimensional Specifications: in. [mm] 6.000[152.40] .250[6.35] .080[2.03] .375[9.52] .187[4.75] .250[6.35] .250 TAB (Q.C.) .500[12.70] SOLDER LUG WIRE LEAD TERMINAL TYPE 1.125[28.58] .187[4.75] .710[18.03] .550[13.97] .725[18.41] .375[9.53] 1.070[27.17] .620[15.75] TEST CUT HOLE IN ACTUAL MATERIAL .480[12.19] PADDLE 1.072[27.23] MOUNTING HOLE Panel Thickness: .025 min. - .187 max. Specific cutout dimension range dependent on panel thickness and material. Consult factory. LR A 21 1 - R 1 SERIES RATING LR SINGLE POLE 21 10A 250 VAC 16 A 125VAC 10(4)A 125VACµ 51 LOW VOLTAGE FOR 6, 12, 18 & 24 VOLT LAMPS 81 10A 250VAC 16A 125VAC 6(4)A 250VACµ50E3 T85 91 10A 250VAC 16A 125VAC 10(4)A 250VACµ T85 CIRCUIT A OFF-NONE-ON TERMINATION 0 1 5 SOLDER LUG .250TAB (QC) WIRE LEAD - S 2 ACTUATOR STYLE C P R CLEAR ROCKER3 PADDLE ROCKER ACTUATOR COLOR B BASE COLOR B BLACK W WHITE 125N / 4 LAMP VOLTAGE 006V 012V 018V 024V 125N 250N 6 VOLTS/ INCANDESCENT 12 VOLTS/ INCANDESCENT 18 VOLTS/ INCANDESCENT 24 VOLTS/ INCANDESCENT 125 VOLTS/ NEON5 250 VOLTS/ NEON5 ROCKER/PADDLE A APRICOT (amber) C COCONUT (white) P PINEAPPLE (pale yellow) S STRAWBERRY (red) W WATERMELON (pale red) CLEAR ROCKER A AMBER C CLEAR G GREEN B BLUE R RED NOTES: Shading indicates standard configurations. Panel Cut-Out Recommendations: For sheet metal panels, switch must enter panel in same direction as the punch. (Burr on bottom.) Test cut hole in actual material. 1 Rating Code 21 available with 125 Volt neon lamp only. Additional ratings are available. Consult factory. 2 Imprinting is available. Consult factory. 3 Clear rocker = T55 and is available with rating 21 and 91. 4 Custom colors available. Consult factory. 5 Neon lamps (125 volt or 250 volt) not recommended with green or blue colored actuators. Carlingswitch,Inc. (860) 793-9281• Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277 27