1000Base-T Module ELECTRONICS INC. EPG4013S & EPG4013S-RC • Complies with or exceeds IEEE 802.3ab 1000Base-T • Add “-RC” after part number for RoHS Compliant • Guaranteed to operate with 10/100Base-TX • 1500 Vrms Isolation Electrical Parameters @ 25° C OCL (µH Min.) Insertion Loss (dB Max.) Return Loss (dB Min.) CMRR (dB Min.) Common to Differential (dB Min.) Cross talk (dB Min.) @ 100 KHz, 0.1 Vrms 8 mA DC bias 1-65 MHz 65-100 MHz 100-125 MHz 1-40 MHz 60 MHz 80 MHz 100 MHz 1-80 MHz 1 MHz 30 MHz 50 MHz 100 MHz 1-40 MHz 60 MHz 100 MHz 350 (Media Side) -1 -1.1 -1.5 -18 -15 -12 -10 -30 -60 -40 -35 -30 -40 -35 -30 • Rise Time : 1.75 nS Max. • Impedance : 100 Ω • Package Schematic 1, 4, 7, 10 .690 (17.53) .050 (1.27) .070 (1.778) 2, 5, 8, 11 24, 21, 18, 15 1CT:1CT Chip Side PCA EPG4013S(-RC) Date Code Pin 1 I.D. .480 (12.19 ) .670 (17.02) Pad Layout .550 (13.97 ) Media Side 3, 6, 9, 12 22, 19, 16, 13 .030 (.762) .012 (.305) .175 (4.445) .019 (.483) .090 (2.286) 23, 20, 17, 14 .011 (.279 ) 0°-8° .035 (.889) .050 (1.27) .600 (15.24) Notes : 1. Assembly Process (Solder Composition) EPG4013S EPG4013S-RC SnPb SnPb Sn SnPb (Leadframe) (Assembly Solder) (RoHS exemption 7a) 2. Peak Solder Rating 225°C 260°C (per IPC/JEDEC J-STD-020C) 3. Moisture Sensitive Levels (MSL) 3 (168 Hours, ≤30°C/60%RH) (per IPC/JEDEC J-STD-020C) 4. Weight 5. Packaging Information (Tube) (Tape & Reel) 4 (72 Hours, ≤30°C/60%RH) TBD grams TBD grams 30 pieces/tube 30 pieces/tube 450 pieces/13” reel 450 pieces/13 reel (*EPG4013S-TR) (*EPG4013S-RCTR) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSFG4013S & -RC Rev. 2 12/7/05 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com