VA / VB / VC series

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
VA / VB / VC
series
Resin-molded Chip (7.3 × 4.3 × 2.8)
By using Functional Polymer cathode, Frequency & Temp. characteristics are greatly improved.
Low ESR at a high frequency range.
High ripple current capability.
<Applications>
Switching Power Supply and DC/DC Converter.
Back up Power Supplies of CPU(VRM etc.)
Miniature high Power Supply.
<Environmental Correspondence>
Compliant to the RoHS directive
(2011/65/EU).
The Lead-free of terminal plating.
Specifications
Item
Performance Characteristics
Category Temperature Range
–55 to +105°C
Rated Voltage Range
2.0 to 25V
Rated Capacitance Range
15 to 330µF
Capacitance Tolerance
±20% at 120Hz, 20°C
Tangent of loss angle (tan δ)
Less than or equal to the specified value at 120Hz, 20°C
ESR ( 1)
Less than or equal to the specified value at 100kHz, 20°C
Leakage Current ( 2)
Less than or equal to the specified value.
Endurance
Damp Heat
(Steady State)
After 2 minutes' application of rated voltage at 20°C
Test condition
105°C, rated voltage 1000Hrs.
Capacitance change
Within ±20% of initial value before test
tan δ
150% or less than the initial specified value
Leakage current ( 2)
Less than or equal to the initial specified value
Test condition
60°C, 90 to 95%RH, No Bias, 500Hrs.
Capacitance change
Within +50% to -20% of initial value before test
tan δ
200% or less than the initial specified value
Leakage current ( 2)
300% or less than the initial specified value
0.5% / 1000Hrs. Max (60%CL)
Failure Rate
1 ESR should be measured at both of the terminal ends closest to the capacitor body.
2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Recommended land Size
(mm)
L×W×H
X
Y
a
7.3 × 4.3 × 2.8
2.9
2.05
4.1
Size Code (ESR)
R.V.(V)
S.V.(
V)
se
Cap [µF]
rie
s
[Upper value : Size Code, Lower value : ESR(m Ω)]
2.5
4.0
6.3
16
25
2.3
2.8
4.6
7.2
18.4
28.7
VB
VC
VA
VB
VA
VB
VA
VB
VA
VB
N
(55)
N
(55)
N
(55)
N
(30)
N
(30)
N
(30)
15
27
33
47
N
(25)
100
N
(18)
150
N
(18)
220
330
L
2.0
N
(15)
N
(15)
N
(15)
N
(15)
N
(15)
N
(15)
VA
N
(60)
N
(60)
H
VB
N
(30)
N
(30)
Z
Z
(mm)
Size Code L±0.2
N
7.3
W1±0.2 W2 ±0.1 H ±0.2 Z±0.2
4.3
2.4
2.8
1.3
N
(9)
Dimension table in next page.
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
VA / VB / VC
series
Standard Ratings
Rated Voltage Surge
Voltage
(V)
(V)
(code)
2.0
(0D)
2.3
2.5
(0E)
2.8
4.0
(0G)
6.3
(0J)
16
(1C)
25
(1E)
4.6
7.2
Rated
Capacitance
(µF)
Case Size
L×W×H
(mm)
tan δ
Leakage
Current
(µA, 2min.)
ESR
(mΩ, 100kHz)
Rated Ripple
Current
(mArms)
NICHICON
FPCAP
MSL
(J-STD-020D)
330
7.3×4.3×2.8
0.12
700
15
2800
RVB0D331MNG
FP-2R0CM331M-VBR
Level 3
330
7.3×4.3×2.8
0.12
700
9
3300
RVC0D331MNG
FP-2R0CM331M-VCR
Level 3
220
7.3×4.3×2.8
0.12
700
18
2600
RVA0E221MNG
FP-2R5CM221M-VAR
Level 3
220
7.3×4.3×2.8
0.12
700
15
2800
RVB0E221MNG
FP-2R5CM221M-VBR
Level 3
150
7.3×4.3×2.8
0.12
700
18
2600
RVA0G151MNG
FP-4R0CM151M-VAR
Level 3
150
7.3×4.3×2.8
0.12
700
15
2800
RVB0G151MNG
FP-4R0CM151M-VBR
Level 3
220
7.3×4.3×2.8
0.12
1000
15
2800
RVB0G221MNG
FP-4R0CM221M-VBR
Level 3
100
7.3×4.3×2.8
0.12
700
25
2000
RVA0J101MNG
FP-6R3CM101M-VAR
Level 3
100
7.3×4.3×2.8
0.12
700
15
2800
RVB0J101MNG
FP-6R3CM101M-VBR
Level 3
150
7.3×4.3×2.8
0.12
1000
15
2800
RVB0J151MNG
FP-6R3CM151M-VBR
Level 3
27
7.3×4.3×2.8
0.12
216
55
1100
RVA1C270MNG
FP-016CM270M-VAR
Level 3
27
7.3×4.3×2.8
0.12
216
30
1400
RVB1C270MNG
FP-016CM270M-VBR
Level 3
33
7.3×4.3×2.8
0.12
264
55
1100
RVA1C330MNG
FP-016CM330M-VAR
Level 3
33
7.3×4.3×2.8
0.12
264
30
1400
RVB1C330MNG
FP-016CM330M-VBR
Level 3
47
7.3×4.3×2.8
0.12
376
55
1100
RVA1C470MNG
FP-016CM470M-VAR
Level 3
47
7.3×4.3×2.8
0.12
376
30
1400
RVB1C470MNG
FP-016CM470M-VBR
Level 3
15
7.3×4.3×2.8
0.12
188
60
1000
RVA1E150MNG
FP-025CM150M-VAR
Level 3
15
7.3×4.3×2.8
0.12
188
30
1400
RVB1E150MNG
FP-025CM150M-VBR
Level 3
27
7.3×4.3×2.8
0.12
337
60
1000
RVA1E270MNG
FP-025CM270M-VAR
Level 3
27
7.3×4.3×2.8
0.12
337
30
1400
RVB1E270MNG
FP-025CM270M-VBR
Level 3
18.4
28.7
Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.)
16V 33µF (VA series)
25V 15µF (VA series)
Impedance
16V 33µF (VA series)
25V 15µF (VA series)
Frequency (kHz)
Frequency (kHz)
Taping specifications are given in page 28.
Recommended land size, soldering by reflow are given in page 25.
Please refer to page 3 for the minimum order quantity.
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
UA / UB
series
Resin-molded Chip, Low-Profile (7.3 × 4.3 × 1.9)
By using Functional Polymer cathode, Frequency & Temp. characteristics are greatly improved.
Low ESR at a high frequency range.
High ripple current capability.
<Applications>
Switching Power Supply and DC/DC Converter.
Back up Power Supplies of CPU(VRM etc.)
Miniature high Power Supply.
<Environmental Correspondence>
Compliant to the RoHS directive
(2011/65/EU).
The Lead-free of terminal plating.
Specifications
Item
Performance Characteristics
Category Temperature Range
–55 to +105°C
Rated Voltage Range
2.0 to 25V
Rated Capacitance Range
15 to 330µF
Capacitance Tolerance
±20% at 120Hz, 20°C
Tangent of loss angle (tan δ)
Less than or equal to the specified value at 120Hz, 20°C
ESR ( 1)
Less than or equal to the specified value at 100kHz, 20°C
Leakage Current ( 2)
Less than or equal to the specified value.
Endurance
Damp Heat
(Steady State)
After 2 minutes' application of rated voltage at 20°C
Test condition
105°C, rated voltage 1000Hrs.
Capacitance change
Within ±20% of initial value before test
tan δ
150% or less than the initial specified value
Leakage current ( 2)
Less than or equal to the initial specified value
Test condition
60°C, 90 to 95%RH, No Bias, 500Hrs.
Capacitance change
Within +50% to -20% of initial value before test
tan δ
200% or less than the initial specified value
Leakage current ( 2)
300% or less than the initial specified value
0.5% / 1000Hrs. Max (60%CL)
Failure Rate
1 ESR should be measured at both of the terminal ends closest to the capacitor body.
2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Recommended land Size
(mm)
Size Code (ESR)
R.V.(V)
S.V.(
V)
se
Cap [µF]
rie
s
L×W×H
X
Y
a
7.3 × 4.3 × 1.9
2.9
2.05
4.1
[Upper value : Size Code, Lower value : ESR(mΩ)]
2.0
4.0
6.3
16
25
2.3
4.6
7.2
18.4
28.7
UA
UB
UA
UA
UB
UA
UB
L
(65)
L
(40)
15
27
L
(25)
100
L
(18)
150
220
270
330
L
(15)
L
(9)
L
(9)
L
(9)
Dimension table in next page.
UA
L
(70)
UB
L
(40)
L
H
Z
Z
L
(15)
(mm)
Size Code
L±0.2
W1±0.2
W2 ±0.1
H ±0.1
Z±0.2
L
7.3
4.3
2.4
1.9
1.3
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
UA / UB
series
Standard Ratings
Rated Voltage Surge
Voltage
(V)
(V)
(code)
2.0
(0D)
Case Size
L×W×H
(mm)
tan δ
Leakage
Current
(µA, 2min.)
ESR
(mΩ, 100kHz)
Rated Ripple
Current
(mArms)
NICHICON
FPCAP
MSL
(J-STD-020D)
220
7.3×4.3×1.9
0.12
700
15
2800
RUA0D221MLG
FP-2R0CM221M-UAR
Level 3
220
7.3×4.3×1.9
0.12
700
9
3300
RUB0D221MLG
FP-2R0CM221M-UBR
Level 3
270
7.3×4.3×1.9
0.12
700
9
3300
RUB0D271MLG
FP-2R0CM271M-UBR
Level 3
330
7.3×4.3×1.9
0.12
700
9
3300
RUB0D331MLG
FP-2R0CM331M-UBR
Level 3
150
7.3×4.3×1.9
0.12
700
18
2600
RUA0G151MLG
FP-4R0CM151M-UAR
Level 3
100
7.3×4.3×1.9
0.12
700
25
2300
RUA0J101MLG
FP-6R3CM101M-UAR
Level 3
100
7.3×4.3×1.9
0.12
700
15
2800
RUB0J101MLG
FP-6R3CM101M-UBR
Level 3
27
7.3×4.3×1.9
0.12
216
65
1100
RUA1C270MLG
FP-016CM270M-UAR
Level 3
27
7.3×4.3×1.9
0.12
216
40
1400
RUB1C270MLG
FP-016CM270M-UBR
Level 3
15
7.3×4.3×1.9
0.12
188
70
1000
RUA1E150MLG
FP-025CM150M-UAR
Level 3
15
7.3×4.3×1.9
0.12
188
40
1400
RUB1E150MLG
FP-025CM150M-UBR
Level 3
2.3
4.0
(0G)
4.6
6.3
(0J)
7.2
16
(1C)
18.4
25
(1E)
Rated
Capacitance
(µF)
28.7
Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.)
16V 27µF (UA series)
25V 15µF (UA series)
Impedance
16V 27µF (UA series)
25V 15µF (UA series)
Frequency (kHz)
Frequency (kHz)
Taping specifications are given in page 28.
Recommended land size, soldering by reflow are given in page 25.
Please refer to page 3 for the minimum order quantity.
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
PS / PA
Standard
(φ6.3, φ8,φ10)
series
By using Functional Polymer cathode, Frequency & Temp. characteristics are greatly improved.
Low ESR at a high frequency range.
High ripple current capability.
Long life and high reliability.
<Applications>
Switching Power Supply and DC/DC Converter.
Back up Power Supplies of CPU(VRM etc.)
Miniature high Power Supply.
<Environmental Correspondence>
Compliant to the RoHS directive
(2011/65/EU).
The Lead-free of terminal plating(Sn).
Specifications
Item
Performance Characteristics
Category Temperature Range
–55 to +105°C
Rated Voltage Range
2.5 to 63V
Rated Capacitance Range
8.2 to 1500µF
Capacitance Tolerance
±20% at 120Hz, 20°C
Tangent of loss angle (tan δ)
Less than or equal to the specified value at 120Hz, 20°C
ESR ( 1)
Less than or equal to the specified value at 100kHz, 20°C
Leakage Current ( 2)
Less than or equal to the specified value.
Endurance
After 2 minutes' application of rated voltage at 20°C
Test condition
105°C, rated voltage 2000Hrs.
Capacitance change
Within ±20% of initial value before test
tan δ
150% or less than the initial specified value
ESR( 1)
150% or less than the initial specified value
Leakage current ( 2)
Less than or equal to the initial specified value
0.5% / 1000Hrs. Max (60%CL)
Failure Rate
1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform.
2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
(mm)
Recommended land Size
φD
6.3
8
10
Size List
Cap [µF]
R.V.(V)
S.V.(
V)
X
1.6
1.9
1.9
Y
3.5
4.2
4.4
a
2.1
2.8
4.3
[φD×L(mm)]
2.5
4.0
6.3
10
16
25
50
63
2.8
4.6
7.2
11.5
18.4
28.7
57.5
72.5
8.2
6.3×5.7
12
22
8×6.7
33
6.3×5.7
(6.3×5.7)
39
47
6.3×5.7
56
6.3×5.7
82
120
10×7.7
10×7.7
8×11.7
8×11.7
8×6.7
(mm)
10×12.4
8×6.7
10×7.7
6.3×5.7
8×6.7
8×6.7
8×11.7
8×6.7
6.3×5.7
100
6.3×5.7
10×12.4
8×11.7
P
C
R
6.5
7.2
0.5 to 0.9
2.1
8.3
9.0
0.8 to 1.1
3.2
φD×L
W
H
6.3×5.7
6.5
8×6.7
8.3
8×11.7
8.3
8.3
9.0
0.8 to 1.1
3.2
150
8×6.7
10×7.7
10×7.7
10.3
10.3
11.0
0.8 to 1.1
4.6
180
8×6.7
8×11.7
10×12.4
10.3
10.3
11.0
0.8 to 1.1
4.6
8×11.7
(10×7.7)
8×6.7
220
270
10×7.7
8×11.7
330
8×11.7
(10×7.7)
10×12.4
8×6.7
10×7.7
470
10×7.7
8×11.7
560
8×11.7
(8×11.7)
8×11.7
680
10×12.4
8×11.7
10×12.4
820
10×12.4
1000
1200
1500
10×12.4
10×12.4
10×12.4
Dimension table in next page.
( ) : PA series
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
PS / PA
series
Standard Ratings
Rated Voltage Surge
Voltage
(V)
(V)
(code)
2.5
(0E)
4.0
(0G)
6.3
(0J)
10
(1A)
16
(1C)
25
(1E)
50
(1H)
2.8
4.6
7.2
11.5
18.4
28.7
57.5
Rated
Capacitance
(µF)
72.5
tan δ
Leakage
Current
(µA, 2min.)
ESR
(mΩ, 100kHz)
Rated Ripple
Current
(mArms)
NICHICON
FPCAP
680
8×11.7
0.12
425
13
4500
RPS0E681MCN1GS
FP-2R5ME681M-PSR
1500
10×12.4
0.12
938
10
5500
RPS0E152MCN1GS
FP-2R5ME152M-PSR
100
6.3×5.7
0.12
80
35
2200
RPS0G101MCN1GS
FP-4R0ME101M-PSR
220
8×6.7
0.12
176
30
2700
RPS0G221MCN1GS
FP-4R0ME221M-PSR
330
8×6.7
0.12
264
30
2700
RPS0G331MCN1GS
FP-4R0ME331M-PSR
470
10×7.7
0.12
376
22
3800
RPS0G471MCN1GS
FP-4R0ME471M-PSR
560
8×11.7
0.12
448
13
4500
RPS0G561MCN1GS
FP-4R0ME561M-PSR
560
8×11.7
0.12
448
9
5400
RPA0G561MCN1GS
FP-4R0ME561M-PAR
1200
10×12.4
0.12
960
12
5500
RPS0G122MCN1GS
FP-4R0ME122M-PSR
82
6.3×5.7
0.12
103
35
2200
RPS0J820MCN1GS
FP-6R3ME820M-PSR
150
8×6.7
0.12
189
30
2600
RPS0J151MCN1GS
FP-6R3ME151M-PSR
180
8×6.7
0.12
227
30
2600
RPS0J181MCN1GS
FP-6R3ME181M-PSR
330
10×7.7
0.12
416
22
3600
RPS0J331MCN1GS
FP-6R3ME331M-PSR
470
8×11.7
0.15
592
15
4300
RPS0J471MCN1GS
FP-6R3ME471M-PSR
560
8×11.7
0.15
706
14
4400
RPS0J561MCN1GS
FP-6R3ME561M-PSR
680
10×12.4
0.15
643
13
5200
RPS0J681MCN1GS
FP-6R3ME681M-PSR
820
10×12.4
0.15
775
12
5500
RPS0J821MCN1GS
FP-6R3ME821M-PSR
1000
10×12.4
0.15
945
12
5500
RPS0J102MCN1GS
FP-6R3ME102M-PSR
47
6.3×5.7
0.12
94
40
2100
RPS1A470MCN1GS
FP-010ME470M-PSR
56
6.3×5.7
0.12
112
40
2100
RPS1A560MCN1GS
FP-010ME560M-PSR
120
8×6.7
0.12
240
30
2600
RPS1A121MCN1GS
FP-010ME121M-PSR
270
10×7.7
0.12
540
25
3500
RPS1A271MCN1GS
FP-010ME271M-PSR
330
8×11.7
0.15
660
17
4000
RPS1A331MCN1GS
FP-010ME331M-PSR
330
10×7.7
0.12
660
20
3600
RPA1A331MCN1GS
FP-010ME331M-PAR
560
10×12.4
0.15
840
13
5300
RPS1A561MCN1GS
FP-010ME561M-PSR
39
6.3×5.7
0.10
125
45
2000
RPS1C390MCN1GS
FP-016ME390M-PSR
39
6.3×5.7
0.10
125
24
2500
RPA1C390MCN1GS
FP-016ME390M-PAR
56
8×6.7
0.10
179
40
2300
RPS1C560MCN1GS
FP-016ME560M-PSR
82
8×6.7
0.10
262
40
2300
RPS1C820MCN1GS
FP-016ME820M-PSR
100
10×7.7
0.10
320
30
3200
RPS1C101MCN1GS
FP-016ME101M-PSR
150
10×7.7
0.10
480
30
3200
RPS1C151MCN1GS
FP-016ME151M-PSR
180
8×11.7
0.12
576
20
3700
RPS1C181MCN1GS
FP-016ME181M-PSR
220
8×11.7
0.12
704
20
3700
RPS1C221MCN1GS
FP-016ME221M-PSR
220
10×7.7
0.10
704
22
3450
RPA1C221MCN1GS
FP-016ME221M-PAR
270
8×11.7
0.12
864
14
4400
RPS1C271MCN1GS
FP-016ME271M-PSR
330
10×12.4
0.12
792
16
4800
RPS1C331MCN1GS
FP-016ME331M-PSR
22
8×6.7
0.12
275
50
1800
RPS1E220MCN1GS
FP-025ME220M-PSR
100
8×11.7
0.12
500
24
3320
RPS1E101MCN1GS
FP-025ME101M-PSR
12
6.3×5.7
0.12
120
40
1250
RPS1H120MCN1GS
FP-050ME120M-PSR
22
8×6.7
0.12
220
37
1550
RPS1H220MCN1GS
FP-050ME220M-PSR
33
10×7.7
0.12
330
32
1950
RPS1H330MCN1GS
FP-050ME330M-PSR
39
8×11.7
0.15
390
26
2300
RPS1H390MCN1GS
FP-050ME390M-PSR
47
8×11.7
0.15
470
26
2300
RPS1H470MCN1GS
FP-050ME470M-PSR
82
10×12.4
0.15
820
23
2800
RPS1H820MCN1GS
FP-050ME820M-PSR
6.3×5.7
0.12
103
41
1200
RPS1J8R2MCN1GS
FP-063ME8R2M-PSR
12
8×6.7
0.12
151
38
1500
RPS1J120MCN1GS
FP-063ME120M-PSR
22
10×7.7
0.12
277
33
1900
RPS1J220MCN1GS
FP-063ME220M-PSR
33
8×11.7
0.15
416
27
2250
RPS1J330MCN1GS
FP-063ME330M-PSR
56
10×12.4
0.15
706
24
2700
RPS1J560MCN1GS
FP-063ME560M-PSR
8.2
63
(1J)
Case Size
φD×L (mm)
Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Taping specifications are given in page 28.
Recommended land size, soldering by reflow are given in page 25.
Please refer to page 3 for the minimum order quantity.
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
HS / HA
Higher Capacitance
(φ8)
series
By using Functional Polymer cathode, Frequency & Temp. characteristics are greatly improved.
Low ESR at a high frequency range.
High ripple current capability.
Long life and high reliability.
<Applications>
Switching Power Supply and DC/DC Converter.
Back up Power Supplies of CPU(VRM etc.)
Miniature high Power Supply.
<Environmental Correspondence>
Compliant to the RoHS directive
(2011/65/EU).
The Lead-free of terminal plating(Sn).
Specifications
Item
Performance Characteristics
Category Temperature Range
–55 to +105°C
Rated Voltage Range
2.5 to 35V
Rated Capacitance Range
100 to 1500µF
Capacitance Tolerance
±20% at 120Hz, 20°C
Tangent of loss angle (tan δ)
Less than or equal to the specified value at 120Hz, 20°C
ESR ( 1)
Less than or equal to the specified value at 100kHz, 20°C
Less than or equal to the specified value.
Leakage Current ( 2)
Endurance
After 2 minutes' application of rated voltage at 20°C
Test condition
105°C, rated voltage 2000Hrs.
Capacitance change
Within ±20% of initial value before test
tan δ
150% or less than the initial specified value
ESR( 1)
150% or less than the initial specified value
Leakage current ( 2)
Less than or equal to the initial specified value
0.5% / 1000Hrs. Max (60%CL)
Failure Rate
1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform.
2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
(mm)
Recommended land Size
Size List (ESR)
R.V.(V)
S.V.(
V)
se
Cap [µF]
rie
s
Y
a
8
1.9
4.2
2.8
2.5
4.0
6.3
10
16
20
25
35
2.8
4.6
7.2
11.5
18.4
23.0
28.7
40.2
HS
HA
HS
HS
HA
HS
HA
HS
HA
HS
HS
8×8.7
8×8.7
(18)
8×6.7
150
(25)
(25)
8×6.7
(22)
8×6.7
270
(22)
8×6.7
330
(9)
8×6.7
390
(18)
8×6.7
(9)
8×6.7
470
(9)
8×6.7
560
(16)
8×6.7
680
8×11.7
(9)
8×6.7
8×7.7
(8)
(9)
8×7.7
(8)
1000
8×7.7
(19)
(mm)
8×11.7
(14)
φD×L
W
H
C
R
P
8×6.7
8.3
8.3
9.0
0.8 to 1.1
3.2
8×7.7
8.3
8.3
9.0
0.8 to 1.1
3.2
8×8.7
8.3
8.3
9.0
0.8 to 1.1
3.2
8×11.7
8.3
8.3
9.0
0.8 to 1.1
3.2
(8)
8×6.7
8×11.7
8×7.7
8×11.7
(8)
(10)
(8)
(10)
8×11.7
1200
1500
X
[Upper value : φD×L(mm), Lower value : ESR(mΩ)]
100
820
φD
(9)
8×11.7
(9)
8×11.7
(12)
Dimension table in next page.
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
HS / HA
series
Standard Ratings
Rated
Capacitance
(µF)
Case Size
φD×L (mm)
tan δ
Leakage
Current
(µA, 2min.)
ESR
(mΩ, 100kHz)
Rated Ripple
Current
(mArms)
NICHICON
FPCAP
680
8×6.7
0.12
700
8
5000
RHA0E681MCN1GS
FP-2R5ME681M-HAR
820
8×11.7
0.12
700
9
5400
RHS0E821MCN1GS
FP-2R5ME821M-HSR
820
8×6.7
0.12
700
8
5000
RHA0E821MCN1GS
FP-2R5ME821M-HAR
1000
8×7.7
0.12
750
8
5000
RHA0E102MCN1GS
FP-2R5ME102M-HAR
1500
8×11.7
0.12
1125
9
5400
RHS0E152MCN1GS
FP-2R5ME152M-HSR
560
8×6.7
0.12
700
16
3200
RHS0G561MCN1GS
FP-4R0ME561M-HSR
560
8×6.7
0.12
700
8
5000
RHA0G561MCN1GS
FP-4R0ME561M-HAR
680
8×7.7
0.12
816
8
5000
RHA0G681MCN1GS
FP-4R0ME681M-HAR
1200
8×11.7
0.12
1440
9
5400
RHS0G122MCN1GS
FP-4R0ME122M-HSR
1500
8×11.7
0.12
1800
12
4700
RHS0G152MCN1GS
FP-4R0ME152M-HSR
330
8×6.7
0.12
700
9
4500
RHA0J331MCN1GS
FP-6R3ME331M-HAR
390
8×6.7
0.12
737
18
3200
RHS0J391MCN1GS
FP-6R3ME391M-HSR
390
8×6.7
0.12
737
9
4500
RHA0J391MCN1GS
FP-6R3ME391M-HAR
470
8×6.7
0.12
888
9
4500
RHA0J471MCN1GS
FP-6R3ME471M-HAR
560
8×7.7
0.12
1058
9
4500
RHA0J561MCN1GS
FP-6R3ME561M-HAR
820
8×11.7
0.12
1550
10
5150
RHS0J821MCN1GS
FP-6R3ME821M-HSR
1000
8×11.7
0.12
1890
10
5150
RHS0J102MCN1GS
FP-6R3ME102M-HSR
150
8×6.7
0.12
700
25
3000
RHS1A151MCN1GS
FP-010ME151M-HSR
330
8×7.7
0.12
660
19
3390
RHS1A331MCN1GS
FP-010ME331M-HSR
150
8×6.7
0.12
700
22
3220
RHA1C151MCN1GS
FP-016ME151M-HAR
270
8×6.7
0.12
864
22
3300
RHA1C271MCN1GS
FP-016ME271M-HAR
23.0
390
8×11.7
0.12
1560
14
4950
RHS1D391MCN1GS
FP-020ME391M-HSR
28.7
100
8×8.7
0.12
700
18
4000
RHS1E101MCN1GS
FP-025ME101M-HSR
40.2
100
8×8.7
0.12
700
25
3000
RHS1V101MCN1GS
FP-035ME101M-HSR
Rated Voltage Surge
Voltage
(V)
(V)
(code)
2.5
(0E)
4.0
(0G)
6.3
(0J)
2.8
4.6
7.2
10
(1A)
11.5
16
(1C)
18.4
20
(1D)
25
(1E)
35
(1V)
Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.)
4.0V 560µF (HA series)
Impedance
4.0V 560 µF (HA series)
Frequency (kHz)
Frequency (kHz)
Taping specifications are given in page 28.
Recommended land size, soldering by reflow are given in page 25.
Please refer to page 3 for the minimum order quantity.
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
SS / SA / SB
Higher Capacitance
(φ6.3)
series
By using Functional Polymer cathode, Frequency & Temp. characteristics are greatly improved.
Low ESR at a high frequency range.
High ripple current capability.
Long life and high reliability.
<Applications>
Switching Power Supply and DC/DC Converter.
Back up Power Supplies of CPU(VRM etc.)
Miniature high Power Supply.
<Environmental Correspondence>
Compliant to the RoHS directive
(2011/65/EU).
The Lead-free of terminal plating(Sn).
Specifications
Item
Performance Characteristics
Category Temperature Range
–55 to +105°C
Rated Voltage Range
2.5 to 35V
Rated Capacitance Range
10 to 560µF
Capacitance Tolerance
±20% at 120Hz, 20°C
Tangent of loss angle (tan δ)
Less than or equal to the specified value at 120Hz, 20°C
ESR ( 1)
Less than or equal to the specified value at 100kHz, 20°C
Leakage Current ( 2)
Less than or equal to the specified value.
Endurance
After 2 minutes' application of rated voltage at 20°C
Test condition
105°C, rated voltage 2000Hrs.
Capacitance change
Within ±20% of initial value before test
tan δ
150% or less than the initial specified value
ESR( 1)
150% or less than the initial specified value
Leakage current ( 2)
Less than or equal to the initial specified value
0.5% / 1000Hrs. Max (60%CL)
Failure Rate
1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform.
2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
(mm)
Recommended land Size
Size List (ESR)
R.V.(V)
S.V.(
V)
se
Cap [µF]
rie
s
φD
X
Y
a
6.3
1.6
3.5
2.1
[Upper value : φD×L(mm), Lower value : ESR(mΩ)]
2.5
4.0
6.3
10
16
2.8
4.6
7.2
11.5
18.4
25
35
28.7 40.2
10
SS SS
6.3×5.7 6.3×5.7
22
6.3×5.7
27
6.3×5.7
47
6.3×5.7
56
6.3×5.7
68
6.3×5.7
SS
SA
SB
SA
SB
SS
SA
SB
SA
SS
SA
(60)
(60)
(40)
(40)
(30)
(mm)
(30)
(30)
6.3×5.7
100
6.3×5.7 6.3×7.7
(25)
(24)
(24)
6.3×5.7
120
φD×L
W
H
C
R
P
6.3×5.7
6.5
6.5
7.2
0.5 to 0.9
2.1
6.3×7.7
6.5
6.5
7.2
0.5 to 0.9
2.1
(18)
6.3×5.7
180
(22)
6.3×5.7 6.3×5.7 6.3×5.7
220
(25)
(15)
(12)
6.3×5.7
270
(14)
330
6.3×5.7
6.3×5.7 6.3×5.7 6.3×5.7 6.3×5.7
390
6.3×5.7 6.3×5.7 6.3×5.7
470
6.3×5.7
560
6.3×5.7 6.3×5.7 6.3×5.7
(14)
(14)
(14)
(10)
(11)
(25)
(14)
(14)
(13)
(25)
(13)
(10)
Dimension table in next page.
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
SS / SA / SB
series
Standard Ratings
Rated Voltage Surge
Voltage
(V)
(V)
(code)
2.5
(0E)
4.0
(0G)
6.3
(0J)
10
(1A)
16
(1C)
25
(1E)
35
(1V)
2.8
4.6
7.2
11.5
18.4
28.7
40.2
Rated
Capacitance
(µF)
Case Size
φD×L (mm)
tan δ
Leakage
Current
(µA, 2min.)
ESR
(mΩ, 100kHz)
Rated Ripple
Current
(mArms)
NICHICON
FPCAP
330
6.3×5.7
0.12
700
14
3160
RSA0E331MCN1GS
FP-2R5ME331M-SAR
390
6.3×5.7
0.12
700
14
3160
RSA0E391MCN1GS
FP-2R5ME391M-SAR
390
6.3×5.7
0.12
700
10
3650
RSB0E391MCN1GS
FP-2R5ME391M-SBR
470
6.3×5.7
0.12
700
13
3600
RSA0E471MCN1GS
FP-2R5ME471M-SAR
560
6.3×5.7
0.12
700
25
2500
RSS0E561MCN1GS
FP-2R5ME561M-SSR
560
6.3×5.7
0.12
700
13
3600
RSA0E561MCN1GS
FP-2R5ME561M-SAR
560
6.3×5.7
0.12
700
10
3800
RSB0E561MCN1GS
FP-2R5ME561M-SBR
330
6.3×5.7
0.12
700
14
3160
RSA0G331MCN1GS
FP-4R0ME331M-SAR
330
6.3×5.7
0.12
700
11
3700
RSB0G331MCN1GS
FP-4R0ME331M-SBR
390
6.3×5.7
0.12
700
14
3160
RSA0G391MCN1GS
FP-4R0ME391M-SAR
100
6.3×5.7
0.12
700
25
2500
RSS0J101MCN1GS
FP-6R3ME101M-SSR
220
6.3×5.7
0.12
700
25
2500
RSS0J221MCN1GS
FP-6R3ME221M-SSR
220
6.3×5.7
0.12
700
15
3160
RSA0J221MCN1GS
FP-6R3ME221M-SAR
220
6.3×5.7
0.12
700
12
3500
RSB0J221MCN1GS
FP-6R3ME221M-SBR
270
6.3×5.7
0.12
700
14
3160
RSA0J271MCN1GS
FP-6R3ME271M-SAR
330
6.3×5.7
0.12
700
25
2500
RSS0J331MCN1GS
FP-6R3ME331M-SSR
330
6.3×5.7
0.12
700
14
3160
RSA0J331MCN1GS
FP-6R3ME331M-SAR
120
6.3×5.7
0.12
700
18
2900
RSA1A121MCN1GS
FP-010ME121M-SAR
100
6.3×5.7
0.12
700
24
2490
RSS1C101MCN1GS
FP-016ME101M-SSR
100
6.3×7.7
0.12
700
24
2700
RSA1C101MCN1GS
FP-016ME101M-SAR
180
6.3×5.7
0.12
576
22
3300
RSA1C181MCN1GS
FP-016ME181M-SAR
10
6.3×5.7
0.12
100
60
1700
RSS1E100MCN1GS
FP-025ME100M-SSR
22
6.3×5.7
0.12
110
40
2100
RSS1E220MCN1GS
FP-025ME220M-SSR
27
6.3×5.7
0.12
135
40
2600
RSS1E270MCN1GS
FP-025ME270M-SSR
47
6.3×5.7
0.12
235
30
2800
RSS1E470MCN1GS
FP-025ME470M-SSR
56
6.3×5.7
0.12
280
30
2800
RSS1E560MCN1GS
FP-025ME560M-SSR
68
6.3×5.7
0.12
340
30
2800
RSS1E680MCN1GS
FP-025ME680M-SSR
10
6.3×5.7
0.12
100
60
1700
RSS1V100MCN1GS
FP-035ME100M-SSR
Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.)
6.3V 220µF (SA series)
Impedance
2.5V 560 µF (SA series)
Frequency (kHz)
Taping specifications are given in page 28.
Recommended land size, soldering by reflow are given in page 25.
Please refer to page 3 for the minimum order quantity.
Frequency (kHz)
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
FS / FA
Higher Capacitance
(φ4, φ5)
series
By using Functional Polymer cathode, Frequency & Temp. characteristics are greatly improved.
Low ESR at a high frequency range.
High ripple current capability.
Long life and high reliability.
<Applications>
Switching Power Supply and DC/DC Converter.
Back up Power Supplies of CPU(VRM etc.)
Miniature high Power Supply.
<Environmental Correspondence>
Compliant to the RoHS directive
(2011/65/EU).
The Lead-free of terminal plating(Sn).
Specifications
Item
Performance Characteristics
Category Temperature Range
–55 to +105°C
Rated Voltage Range
2.5 to 25V
Rated Capacitance Range
10 to 330µF
Capacitance Tolerance
±20% at 120Hz, 20°C
Tangent of loss angle (tan δ)
Less than or equal to the specified value at 120Hz, 20°C
ESR ( 1)
Less than or equal to the specified value at 100kHz, 20°C
Leakage Current ( 2)
Less than or equal to the specified value.
Endurance
After 2 minutes' application of rated voltage at 20°C
Test condition
105°C, rated voltage 2000Hrs.
Capacitance change
Within ±20% of initial value before test
tan δ
150% or less than the initial specified value
ESR( 1)
150% or less than the initial specified value
Leakage current ( 2)
Less than or equal to the initial specified value
0.5% / 1000Hrs. Max (60%CL)
Failure Rate
1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform.
2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
(mm)
Recommended land Size
Size List (ESR)
R.V.(V)
S.V.(
V)
se
Cap [µF]
rie
s
4.0
6.3
10
16
25
2.8
4.6
7.2
11.5
18.4
28.7
FS
FS
FS
4×5.2
(220)
FS
FS
5×5.7
(45)
5×5.7
(35)
5×5.7
(35)
5×5.7
(40)
FS
FA
22
33
39
5×5.7
(30)
47
5×5.7
(30)
68
5×5.7
(22)
100
120
Y
a
4
1.6
2.6
1.0
5
1.6
3.0
1.4
(mm)
φD×L
W
H
C
R
P
4×5.2
4.3
4.3
5.1
0.5 to 0.9
1.0
5×5.7
5.3
5.3
5.9
0.5 to 0.9
1.4
5×5.7
(24)
5×5.7
(24)
5×5.7
(22)
150
330
X
[Upper value : φD×L(mm), Lower value : ESR(mΩ)]
2.5
10
180
φD
5×5.7
(21)
5×5.7
(10)
Dimension table in next page.
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
FS / FA
series
Standard Ratings
Rated Voltage Surge
Voltage
(V)
(V)
(code)
2.5
(0E)
4.0
(0G)
6.3
(0J)
10
(1A)
16
(1C)
25
(1E)
Rated
Capacitance
(µF)
Case Size
φD×L (mm)
tan δ
Leakage
Current
(µA, 2min.)
ESR
(mΩ, 100kHz)
Rated Ripple
Current
(mArms)
NICHICON
FPCAP
180
5×5.7
0.12
300
21
2670
RFS0E181MCN1GS
FP-2R5ME181M-FSR
330
5×5.7
0.12
500
10
3300
RFA0E331MCN1GS
FP-2R5ME331M-FAR
100
5×5.7
0.12
300
22
2610
RFS0G101MCN1GS
FP-4R0ME101M-FSR
150
5×5.7
0.12
300
22
2610
RFS0G151MCN1GS
FP-4R0ME151M-FSR
47
5×5.7
0.12
300
30
2000
RFS0J470MCN1GS
FP-6R3ME470M-FSR
100
5×5.7
0.12
300
24
2500
RFS0J101MCN1GS
FP-6R3ME101M-FSR
120
5×5.7
0.12
300
24
2500
RFS0J121MCN1GS
FP-6R3ME121M-FSR
10
4×5.2
0.12
100
220
700
RFS1A100MCN1GB
FP-010ME100M-FSR
68
5×5.7
0.12
300
30
2000
RFS1A680MCN1GS
FP-010ME680M-FSR
22
5×5.7
0.12
100
45
1210
RFS1C220MCN1GS
FP-016ME220M-FSR
33
5×5.7
0.12
105
35
2070
RFS1C330MCN1GS
FP-016ME330M-FSR
39
5×5.7
0.12
125
35
2070
RFS1C390MCN1GS
FP-016ME390M-FSR
22
5×5.7
0.12
300
40
2200
RFS1E220MCN1GS
FP-025ME220M-FSR
2.8
4.6
7.2
11.5
18.4
28.7
Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.)
4.0V 150µF (FS series)
Impedance
4.0V 150 µF (FS series)
Frequency (kHz)
Frequency (kHz)
Taping specifications are given in page 28.
Recommended land size, soldering by reflow are given in page 25.
Please refer to page 3 for the minimum order quantity.
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
SL
Low Profile (φ6.3)
series
By using Functional Polymer cathode, Frequency & Temp. characteristics are greatly improved.
Low ESR at a high frequency range.
High ripple current capability.
Low Profile(Height : 4.5mmMax.).
<Applications>
Switching Power Supply and DC/DC Converter.
Back up Power Supplies of CPU(VRM etc.)
Miniature high Power Supply.
<Environmental Correspondence>
Compliant to the RoHS directive
(2011/65/EU).
The Lead-free of terminal plating(Sn).
Specifications
Item
Performance Characteristics
Category Temperature Range
–55 to +105°C
Rated Voltage Range
2.5 to 25V
Rated Capacitance Range
15 to 330µF
Capacitance Tolerance
±20% at 120Hz, 20°C
Tangent of loss angle (tan δ)
Less than or equal to the specified value at 120Hz, 20°C
ESR ( 1)
Less than or equal to the specified value at 100kHz, 20°C
Leakage Current ( 2)
Less than or equal to the specified value.
Endurance
After 2 minutes' application of rated voltage at 20°C
Test condition
105°C, rated voltage 2000Hrs.
Capacitance change
Within ±20% of initial value before test
tan δ
150% or less than the initial specified value
ESR( 1)
150% or less than the initial specified value
Leakage current ( 2)
Less than or equal to the initial specified value
0.5% / 1000Hrs. Max (60%CL)
Failure Rate
1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform.
2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
(mm)
Recommended land Size
Size List (ESR)
Cap [µF]
R.V.(V)
S.V.(
V)
6.3
16
25
2.8
7.2
18.4
6.3×4.2
(45)
28.7
6.3×4.2
(55)
6.3×4.2
(16)
6.3×4.2
(18)
6.3×4.2
(18)
6.3×4.2
(18)
150
220
330
X
Y
a
6.3
1.6
3.5
2.1
[Upper value : φD×L(mm), Lower value : ESR(mΩ)]
2.5
15
100
φD
6.3×4.2
(16)
6.3×4.2
(16)
Dimension table in next page.
(mm)
φD×L
W
H
C
R
P
6.3×4.2
6.5
6.5
7.2
0.5 to 0.9
2.1
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
SL
series
Standard Ratings
Rated Voltage Surge
Voltage
(V)
(V)
(code)
2.5
(0E)
6.3
(0J)
2.8
7.2
Rated
Capacitance
(µF)
Case Size
φD×L (mm)
tan δ
Leakage
Current
(µA, 2min.)
ESR
(mΩ, 100kHz)
Rated Ripple
Current
(mArms)
NICHICON
FPCAP
100
6.3×4.2
0.12
300
16
3500
RSL0E101MCN1GB
FP-2R5ME101M-SLR
220
6.3×4.2
0.12
300
16
3500
RSL0E221MCN1GB
FP-2R5ME221M-SLR
330
6.3×4.2
0.12
413
16
3500
RSL0E331MCN1GB
FP-2R5ME331M-SLR
100
6.3×4.2
0.12
315
18
3200
RSL0J101MCN1GB
FP-6R3ME101M-SLR
150
6.3×4.2
0.12
473
18
3200
RSL0J151MCN1GB
FP-6R3ME151M-SLR
220
6.3×4.2
0.12
693
18
3200
RSL0J221MCN1GB
FP-6R3ME221M-SLR
16
(1C)
18.4
15
6.3×4.2
0.12
300
45
1900
RSL1C150MCN1GB
FP-016ME150M-SLR
25
(1E)
28.7
15
6.3×4.2
0.12
100
55
1700
RSL1E150MCN1GB
FP-025ME150M-SLR
Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.)
6.3V 220µF
Impedance
6.3V 220 µF
Frequency (kHz)
Frequency (kHz)
Taping specifications are given in page 28.
Recommended land size, soldering by reflow are given in page 25.
Please refer to page 3 for the minimum order quantity.
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
NS
Standard
series
By using Functional Polymer cathode, Frequency & Temp. characteristics are greatly improved.
Low ESR at a high frequency range.
High ripple current capability.
Long life and high reliability.
<Applications>
Switching Power Supply and DC/DC Converter.
Back up Power Supplies of CPU(VRM etc.)
Miniature high Power Supply.
<Environmental Correspondence>
Compliant to the RoHS directive
(2011/65/EU).
The Lead-free of terminal plating(Sn).
Specifications
Item
Performance Characteristics
Category Temperature Range
–55 to +105°C
Rated Voltage Range
4.0 to 25V
Rated Capacitance Range
10 to 1200µF
Capacitance Tolerance
±20% at 120Hz, 20°C
Tangent of loss angle (tan δ)
Less than or equal to the specified value at 120Hz, 20°C
ESR ( 1)
Less than or equal to the specified value at 100kHz, 20°C
Leakage Current ( 2)
Less than or equal to the specified value.
Endurance
After 2 minutes' application of rated voltage at 20°C
Test condition
105°C, rated voltage 2000Hrs.
Capacitance change
Within ±20% of initial value before test
tan δ
150% or less than the initial specified value
ESR( 1)
150% or less than the initial specified value
Leakage current ( 2)
Less than or equal to the initial specified value
0.1% / 1000Hrs. Max (60%CL)
Failure Rate
1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform.
2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Size List (ESR)
Cap [µF]
R.V.(V)
S.V.(
V)
6.3
10
16
20
25
4.6
7.2
11.5
18.4
23.0
28.7
6.3×7
6.3×10
10
22
33
6.3×7
47
6.3×7
68
6.3×10
100
8×11.5
150
8×11.5
180
220
8×11.5
330
10×12.5
390
8×11.5
470
6.3×7
6.3×7
8×11.5
6.3×7
6.3×10
10×12.5
6.3×10
8×11.5
10×12.5
8×11.5
8×11.5
(mm)
φD×L
φd
P
α
10×12.5
6.3×7
0.45
2.5
1.0
8×11.5
6.3×10
0.5
2.5
1.0
8×11.5
0.6
3.5
1.5
10×12.5
0.6
5.0
1.5
8×11.5
10×12.5
10×12.5
10×12.5 10×12.5
10×12.5
8×11.5
680
10×12.5
820
10×12.5 10×12.5
1000
1200
Stand off
Wire(Lead free)
6.3×7
15
560
Aluminum case
[φD×L(mm)]
4.0
10×12.5
10×12.5
Dimension table in next page.
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
NS
series
Standard Ratings
Rated Voltage Surge
Voltage
(V)
(V)
(code)
4.0
(0G)
6.3
(0J)
10
(1A)
16
(1C)
20
(1D)
25
(1E)
4.6
7.2
11.5
18.4
23.0
28.7
Rated
Capacitance
(µF)
Case Size
φD×L (mm)
tan δ
Leakage
Current
(µA, 2min.)
ESR
(mΩ, 100kHz)
Rated Ripple
Current
(mArms)
NICHICON
FPCAP
560
8×11.5
0.08
336
10
5230
RNS0G561MDN1□□
FP-4R0RE561M-NS□□
820
10×12.5
0.08
492
10
5500
RNS0G821MDN1□□
FP-4R0RE821M-NS□□
1200
10×12.5
0.15
720
10
5500
RNS0G122MDN1□□
FP-4R0RE122M-NS□□
47
6.3×7
0.07
50
42
2050
RNS0J470MDS1□□
FP-6R3RE470M-NS□□
150
8×11.5
0.07
142
21
3900
RNS0J151MDN1□□
FP-6R3RE151M-NS□□
220
8×11.5
0.07
208
21
3900
RNS0J221MDN1□□
FP-6R3RE221M-NS□□
330
10×12.5
0.07
312
10
5500
RNS0J331MDN1□□
FP-6R3RE331M-NS□□
390
8×11.5
0.08
369
10
5230
RNS0J391MDN1□□
FP-6R3RE391M-NS□□
680
10×12.5
0.08
643
10
5500
RNS0J681MDN1□□
FP-6R3RE681M-NS□□
820
10×12.5
0.12
775
10
5500
RNS0J821MDN1□□
FP-6R3RE821M-NS□□
1000
10×12.5
0.12
945
10
5500
RNS0J102MDN1□□
FP-6R3RE102M-NS□□
33
6.3×7
0.07
50
49
1900
RNS1A330MDS1□□
FP-010RE330M-NS□□
68
6.3×10
0.07
102
35
2650
RNS1A680MDS1□□
FP-010RE680M-NS□□
100
8×11.5
0.07
150
21
3900
RNS1A101MDN1□□
FP-010RE101M-NS□□
220
10×12.5
0.07
330
10
5500
RNS1A221MDN1□□
FP-010RE221M-NS□□
470
10×12.5
0.08
705
10
5500
RNS1A471MDN1□□
FP-010RE471M-NS□□
22
6.3×7
0.06
53
49
1900
RNS1C220MDS1□□
FP-016RE220M-NS□□
33
6.3×7
0.06
79
49
1900
RNS1C330MDS1□□
FP-016RE330M-NS□□
47
6.3×10
0.06
113
42
2400
RNS1C470MDS1□□
FP-016RE470M-NS□□
68
8×11.5
0.06
163
25
3600
RNS1C680MDN1□□
FP-016RE680M-NS□□
100
8×11.5
0.06
240
21
3900
RNS1C101MDN1□□
FP-016RE101M-NS□□
150
10×12.5
0.06
360
10
5500
RNS1C151MDN1□□
FP-016RE151M-NS□□
180
8×11.5
0.08
432
16
4700
RNS1C181MDN1□□
FP-016RE181M-NS□□
330
10×12.5
0.08
792
10
5500
RNS1C331MDN1□□
FP-016RE331M-NS□□
15
6.3×7
0.06
50
63
1700
RNS1D150MDS1□□
FP-020RE150M-NS□□
22
6.3×7
0.06
66
49
1900
RNS1D220MDS1□□
FP-020RE220M-NS□□
33
6.3×10
0.06
99
49
2200
RNS1D330MDS1□□
FP-020RE330M-NS□□
47
8×11.5
0.06
141
28
3400
RNS1D470MDN1□□
FP-020RE470M-NS□□
68
8×11.5
0.06
204
25
3600
RNS1D680MDN1□□
FP-020RE680M-NS□□
100
10×12.5
0.06
300
15
4500
RNS1D101MDN1□□
FP-020RE101M-NS□□
10
6.3×7
0.06
50
63
1700
RNS1E100MDS1□□
FP-025RE100M-NS□□
15
6.3×10
0.06
75
49
2200
RNS1E150MDS1□□
FP-025RE150M-NS□□
22
8×11.5
0.06
110
28
3400
RNS1E220MDN1□□
FP-025RE220M-NS□□
33
10×12.5
0.06
165
20
3800
RNS1E330MDN1□□
FP-025RE330M-NS□□
47
10×12.5
0.06
235
20
3800
RNS1E470MDN1□□
FP-025RE470M-NS□□
100
10×12.5
0.08
500
15
4500
RNS1E101MDN1□□
FP-025RE101M-NS□□
Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Taping specifications are given in page 26, 27.
Please refer to page 3 for the minimum order quantity.
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
R7
Low ESR
series
By using Functional Polymer cathode, Frequency & Temp. characteristics are greatly improved.
Low ESR at a high frequency range.
High ripple current capability.
Long life and high reliability.
<Applications>
Switching Power Supply and DC/DC Converter.
Back up Power Supplies of CPU(VRM etc.)
Miniature high Power Supply.
<Environmental Correspondence>
Compliant to the RoHS directive
(2011/65/EU).
The Lead-free of terminal plating(Sn).
Specifications
Item
Performance Characteristics
Category Temperature Range
–55 to +105°C
Rated Voltage Range
2.5 to 16V
Rated Capacitance Range
68 to 1500µF
Capacitance Tolerance
±20% at 120Hz, 20°C
Tangent of loss angle (tan δ)
Less than or equal to the specified value at 120Hz, 20°C
ESR ( 1)
Less than or equal to the specified value at 100kHz, 20°C
Leakage Current ( 2)
Less than or equal to the specified value.
Endurance
After 2 minutes' application of rated voltage at 20°C
Test condition
105°C, rated voltage 2000Hrs.
Capacitance change
Within ±20% of initial value before test
tan δ
150% or less than the initial specified value
ESR( 1)
150% or less than the initial specified value
Leakage current ( 2)
Less than or equal to the initial specified value
0.1% / 1000Hrs. Max (60%CL)
Failure Rate
1 ESR should be measured at both of the terminal ends closest to the capacitor body.
2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Size List (ESR)
Cap [µF]
R.V.(V)
S.V.(
V)
4.0
6.3
10
16
2.8
4.6
7.2
11.5
18.4
68
Stand off
Wire(Lead free)
8×11.5
100
8×11.5
150
8×11.5
220
8×11.5
8×11.5
10×12.5
10×12.5
270
10×12.5
330
10×12.5
390
10×12.5
560
8×11.5
680
8×11.5
820
8×11.5
(mm)
10×12.5
8×11.5
470
φD×L
φd
P
α
8×11.5
0.6
3.5
1.5
10×12.5
0.6
5.0
1.5
10×12.5 10×12.5
10×12.5 10×12.5
1000
10×12.5
1200
1500
Aluminum case
[φD×L(mm)]
2.5
10×12.5
10×12.5
Dimension table in next page.
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
R7
series
Standard Ratings
Rated Voltage Surge
Voltage
(V)
(V)
(code)
2.5
(0E)
4.0
(0G)
6.3
(0J)
10
(1A)
16
(1C)
2.8
4.6
7.2
11.5
18.4
Rated
Capacitance
(µF)
Case Size
φD×L (mm)
tan δ
Leakage
Current
(µA, 2min.)
ESR
(mΩ, 100kHz)
Rated Ripple
Current
(mArms)
NICHICON
FPCAP
680
8×11.5
0.08
425
7
5600
RR70E681MDN1□□
FP-2R5RE681M-R7□□
820
8×11.5
0.08
513
7
5600
RR70E821MDN1□□
FP-2R5RE821M-R7□□
1500
10×12.5
0.08
938
7
6100
RR70E152MDN1□□
FP-2R5RE152M-R7□□
560
8×11.5
0.08
224
7
5600
RR70G561MDN1□□
FP-4R0RE561M-R7□□
820
10×12.5
0.08
328
7
6100
RR70G821MDN1□□
FP-4R0RE821M-R7□□
1200
10×12.5
0.15
960
7
6100
RR70G122MDN1□□
FP-4R0RE122M-R7□□
150
8×11.5
0.07
47
7
5600
RR70J151MDN1□□
FP-6R3RE151M-R7□□
220
8×11.5
0.07
69
7
5600
RR70J221MDN1□□
FP-6R3RE221M-R7□□
330
10×12.5
0.07
104
7
6100
RR70J331MDN1□□
FP-6R3RE331M-R7□□
390
8×11.5
0.08
246
7
5600
RR70J391MDN1□□
FP-6R3RE391M-R7□□
680
10×12.5
0.08
428
7
6100
RR70J681MDN1□□
FP-6R3RE681M-R7□□
820
10×12.5
0.12
517
7
6100
RR70J821MDN1□□
FP-6R3RE821M-R7□□
1000
10×12.5
0.12
630
7
6100
RR70J102MDN1□□
FP-6R3RE102M-R7□□
100
8×11.5
0.07
50
7
5600
RR71A101MDN1□□
FP-010RE101M-R7□□
220
10×12.5
0.07
110
7
6100
RR71A221MDN1□□
FP-010RE221M-R7□□
470
10×12.5
0.08
470
7
6100
RR71A471MDN1□□
FP-010RE471M-R7□□
680
10×12.5
0.10
1360
7
6100
RR71A681MDN1□□
FP-010RE681M-R7□□
68
8×11.5
0.06
54
7
5600
RR71C680MDN1□□
FP-016RE680M-R7□□
100
8×11.5
0.06
80
7
5600
RR71C101MDN1□□
FP-016RE101M-R7□□
150
10×12.5
0.06
120
7
6100
RR71C151MDN1□□
FP-016RE151M-R7□□
270
10×12.5
0.08
648
7
6100
RR71C271MDN1□□
FP-016RE271M-R7□□
330
10×12.5
0.08
792
7
6100
RR71C331MDN1□□
FP-016RE331M-R7□□
Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.)
µ
µ
Impedance
µ
µ
Frequency (kHz)
Frequency (kHz)
Taping specifications are given in page 26, 27.
Please refer to page 3 for the minimum order quantity.
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
R5
Ultra-low ESR
series
By using Functional Polymer cathode, Frequency & Temp. characteristics are greatly improved.
Low ESR at a high frequency range.
High ripple current capability.
Long life and high reliability.
<Applications>
Switching Power Supply and DC/DC Converter.
Back up Power Supplies of CPU(VRM etc.)
Miniature high Power Supply.
<Environmental Correspondence>
Compliant to the RoHS directive
(2011/65/EU).
The Lead-free of terminal plating(Sn).
Specifications
Item
Performance Characteristics
Category Temperature Range
–55 to +105°C
Rated Voltage Range
2.5 to 6.3V
Rated Capacitance Range
390 to 1500µF
Capacitance Tolerance
±20% at 120Hz, 20°C
Tangent of loss angle (tan δ)
Less than or equal to the specified value at 120Hz, 20°C
ESR ( 1)
Less than or equal to the specified value at 100kHz, 20°C
Leakage Current ( 2)
Less than or equal to the specified value.
Endurance
After 2 minutes' application of rated voltage at 20°C
Test condition
105°C, rated voltage 2000Hrs.
Capacitance change
Within ±20% of initial value before test
tan δ
150% or less than the initial specified value
ESR( 1)
150% or less than the initial specified value
Leakage current ( 2)
Less than or equal to the initial specified value
0.1% / 1000Hrs. Max (60%CL)
Failure Rate
1 ESR should be measured at both of the terminal ends closest to the capacitor body.
2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Size List (ESR)
Cap [µF]
R.V.(V)
S.V.(
V)
4.0
6.3
2.8
4.6
7.2
390
Stand off
Wire(Lead free)
8×11.5
470
8×11.5
560
8×11.5
680
8×11.5
10×12.5
820
8×11.5
10×12.5 10×12.5
1000
8×11.5
1200
1500
Aluminum case
[φD×L(mm)]
2.5
8×11.5
(mm)
10×12.5
10×12.5
Dimension table in next page.
φD×L
φd
P
α
8×11.5
0.6
3.5
1.5
10×12.5
0.6
5.0
1.5
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
R5
series
Standard Ratings
Rated Voltage Surge
Voltage
(V)
(V)
(code)
2.5
(0E)
2.8
4.0
(0G)
4.6
6.3
(0J)
7.2
Rated
Capacitance
(µF)
Case Size
φD×L (mm)
tan δ
Leakage
Current
(µA, 2min.)
ESR
(mΩ, 100kHz)
Rated Ripple
Current
(mArms)
NICHICON
FPCAP
560
8×11.5
0.15
350
5
6630
RR50E561MDN1□□
FP-2R5RE561M-R5□□
680
8×11.5
0.15
425
5
6630
RR50E681MDN1□□
FP-2R5RE681M-R5□□
820
8×11.5
0.15
513
5
6630
RR50E821MDN1□□
FP-2R5RE821M-R5□□
1000
8×11.5
0.15
625
5
6630
RR50E102MDN1□□
FP-2R5RE102M-R5□□
1500
10×12.5
0.15
938
5
7220
RR50E152MDN1□□
FP-2R5RE152M-R5□□
560
8×11.5
0.15
560
5
6630
RR50G561MDN1□□
FP-4R0RE561M-R5□□
820
10×12.5
0.15
820
5
7220
RR50G821MDN1□□
FP-4R0RE821M-R5□□
1200
10×12.5
0.15
1200
5
7220
RR50G122MDN1□□
FP-4R0RE122M-R5□□
390
8×11.5
0.15
614
5
6630
RR50J391MDN1□□
FP-6R3RE391M-R5□□
470
8×11.5
0.15
592
5
6630
RR50J471MDN1□□
FP-6R3RE471M-R5□□
680
10×12.5
0.15
1071
5
7220
RR50J681MDN1□□
FP-6R3RE681M-R5□□
820
10×12.5
0.15
1292
5
7220
RR50J821MDN1□□
FP-6R3RE821M-R5□□
Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.)
µ
Impedance
µ
Frequency (kHz)
Frequency (kHz)
Taping specifications are given in page 26, 27.
Please refer to page 3 for the minimum order quantity.
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
L8
Low ESR, Low Profile (φ8)
series
By using Functional Polymer cathode, Frequency & Temp. characteristics are greatly improved.
Low ESR at a high frequency range.
High ripple current capability.
Long life and high reliability.
<Applications>
Switching Power Supply and DC/DC Converter.
Back up Power Supplies of CPU(VRM etc.)
Miniature high Power Supply.
<Environmental Correspondence>
Compliant to the RoHS directive
(2011/65/EU).
The Lead-free of terminal plating(Sn).
Specifications
Item
Performance Characteristics
Category Temperature Range
–55 to +105°C
Rated Voltage Range
2.5 to 35V
Rated Capacitance Range
100 to 1500µF
Capacitance Tolerance
±20% at 120Hz, 20°C
Tangent of loss angle (tan δ)
Less than or equal to the specified value at 120Hz, 20°C
ESR ( 1)
Less than or equal to the specified value at 100kHz, 20°C
Leakage Current ( 2)
Less than or equal to the specified value.
Endurance
After 2 minutes' application of rated voltage at 20°C
Test condition
105°C, rated voltage 2000 / 5000Hrs.
Capacitance change
Within ±20% of initial value before test
tan δ
150% or less than the initial specified value
ESR( 1)
150% or less than the initial specified value
Leakage current ( 2)
Less than or equal to the initial specified value
0.1% / 1000Hrs. Max (60%CL)
Failure Rate
1 ESR should be measured at both of the terminal ends closest to the capacitor body.
2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Size List (ESR)
R.V.(V)
S.V.(
V)
4.0
6.3
16
35
2.8
4.6
7.2
18.4
40.2
100
8×8
8×8
180
8×8
220
8×8
270
8×8
Cap [µF]
330
Stand off
Wire(Lead free)
8×8
470
560
Aluminum case
[φD×L(mm)]
2.5
(mm)
8×8
8×8
8×8
680
820
8×8
1000
8×8
1200
8×8
1500
8×8
8×8
Dimension table in next page.
8×8
φD×L
φd
P
α
8×8
8×8
0.6
3.5
1.0
8×8
8×8
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
L8
series
Standard Ratings
Rated Voltage Surge
Voltage
(V)
(V)
(code)
2.5
(0E)
4.0
(0G)
6.3
(0J)
16
(1C)
35
(1V)
2.8
4.6
7.2
18.4
40.2
Rated
Capacitance
(µF)
Case Size
φD×L (mm)
tan δ
Leakage
Current
(µA, 2min.)
ESR
(mΩ, 100kHz)
Rated Ripple
Current
(mArms)
560
8×8
0.12
500
6
6100
RL80E561MDN1□□
FP-2R5RE561M-L8□□
560
8×8
0.12
500
6
6100
RL80E561MDNASQ□□
FP-2R5RE561M-L8□□-5K
820
8×8
0.12
513
6
6100
RL80E821MDN1□□
FP-2R5RE821M-L8□□
820
8×8
0.12
513
6
6100
RL80E821MDNASQ□□
FP-2R5RE821M-L8□□-5K
1000
8×8
0.12
625
6
6100
RL80E102MDN1□□
FP-2R5RE102M-L8□□
1200
8×8
0.12
750
7
6100
RL80E122MDN1□□
FP-2R5RE122M-L8□□
1500
8×8
0.12
938
7
6100
RL80E152MDN1□□
FP-2R5RE152M-L8□□
560
8×8
0.12
560
6
6100
RL80G561MDN1□□
FP-4R0RE561M-L8□□
560
8×8
0.12
560
6
6100
RL80G561MDNASQ□□
FP-4R0RE561M-L8□□-5K
820
8×8
0.12
820
6
6100
RL80G821MDN1□□
FP-4R0RE821M-L8□□
470
8×8
0.12
592
8
5700
RL80J471MDN1□□
FP-6R3RE471M-L8□□
470
8×8
0.12
592
8
5700
RL80J471MDNASQ□□
FP-6R3RE471M-L8□□-5K
560
8×8
0.12
706
8
5700
RL80J561MDN1□□
FP-6R3RE561M-L8□□
560
8×8
0.12
706
8
5700
RL80J561MDNASQ□□
FP-6R3RE561M-L8□□-5K
680
8×8
0.12
857
8
5700
RL80J681MDN1□□
FP-6R3RE681M-L8□□
820
8×8
0.12
1033
8
5700
RL80J821MDN1□□
FP-6R3RE821M-L8□□
1000
8×8
0.12
1260
9
5700
RL80J102MDN1□□
FP-6R3RE102M-L8□□
100
8×8
0.12
320
12
5000
RL81C101MDN1□□
FP-016RE101M-L8□□
180
8×8
0.12
576
12
5000
RL81C181MDN1□□
FP-016RE181M-L8□□
220
8×8
0.12
704
12
5000
RL81C221MDN1□□
FP-016RE221M-L8□□
270
8×8
0.12
864
10
5000
RL81C271MDN1□□
FP-016RE271M-L8□□
330
8×8
0.12
1056
12
5000
RL81C331MDN1□□
FP-016RE331M-L8□□
100
8×8
0.12
700
25
3000
RL81V101MDN1□□
FP-035RE101M-L8□□
NICHICON
FPCAP
Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
: Load life 5000hours.
Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.)
16V 270µF
Impedance
16V 270 µF
Frequency (kHz)
Frequency (kHz)
Taping specifications are given in page 26, 27.
Please refer to page 3 for the minimum order quantity.
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
E5
Ultra-low ESR, Low Profile (φ8)
series
By using Functional Polymer cathode, Frequency & Temp. characteristics are greatly improved.
Low ESR at a high frequency range.
High ripple current capability.
Long life and high reliability.
<Applications>
Switching Power Supply and DC/DC Converter.
Back up Power Supplies of CPU(VRM etc.)
Miniature high Power Supply.
<Environmental Correspondence>
Compliant to the RoHS directive
(2011/65/EU).
The Lead-free of terminal plating(Sn).
Specifications
Item
Performance Characteristics
Category Temperature Range
–55 to +105°C
Rated Voltage Range
2.5 to 4.0V
Rated Capacitance Range
560 to 820µF
Capacitance Tolerance
±20% at 120Hz, 20°C
Tangent of loss angle (tan δ)
Less than or equal to the specified value at 120Hz, 20°C
ESR ( 1)
Less than or equal to the specified value at 100kHz, 20°C
Leakage Current ( 2)
Less than or equal to the specified value.
Endurance
After 2 minutes' application of rated voltage at 20°C
Test condition
105°C, rated voltage 2000Hrs.
Capacitance change
Within ±20% of initial value before test
tan δ
150% or less than the initial specified value
ESR( 1)
150% or less than the initial specified value
Leakage current ( 2)
Less than or equal to the initial specified value
0.1% / 1000Hrs. Max (60%CL)
Failure Rate
1 ESR should be measured at both of the terminal ends closest to the capacitor body.
2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Size List (ESR)
R.V.(V)
S.V.(
V)
4.0
2.8
4.6
560
8×8
8×8
820
8×8
Cap [µF]
Aluminum case
[φD×L(mm)]
2.5
Stand off
Wire(Lead free)
(mm)
Dimension table in next page.
φD×L
φd
P
α
8×8
0.6
3.5
1.0
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
E5
series
Standard Ratings
Rated Voltage Surge
Voltage
(V)
(V)
(code)
2.5
(0E)
2.8
4.0
(0G)
4.6
Rated
Capacitance
(µF)
Case Size
φD×L (mm)
tan δ
Leakage
Current
(µA, 2min.)
ESR
(mΩ, 100kHz)
Rated Ripple
Current
(mArms)
NICHICON
FPCAP
560
8×8
0.10
500
5
6300
RE50E561MDN1□□
FP-2R5RE561M-E5□□
820
8×8
0.10
513
5
6300
RE50E821MDN1□□
FP-2R5RE821M-E5□□
560
8×8
0.10
560
5
6300
RE50G561MDN1□□
FP-4R0RE561M-E5□□
Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.)
2.5V 560µF
Impedance
2.5V 560 µ F
Frequency (kHz)
Frequency (kHz)
Taping specifications are given in page 26, 27.
Please refer to page 3 for the minimum order quantity.
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
S8
Low ESR / ESL, Low Profile (φ6.3)
series
By using Functional Polymer cathode, Frequency & Temp. characteristics are greatly improved.
Low ESR and Low ESL at a high frequency range.
High ripple current capability.
Long life and high reliability.
<Applications>
Switching Power Supply and DC/DC Converter.
Back up Power Supplies of CPU(VRM etc.)
Miniature high Power Supply.
<Environmental Correspondence>
Compliant to the RoHS directive
(2011/65/EU).
The Lead-free of terminal plating(Sn).
Specifications
Item
Performance Characteristics
Category Temperature Range
–55 to +105°C
Rated Voltage Range
2.5 to 16V
Rated Capacitance Range
100 to 1200µF
Capacitance Tolerance
±20% at 120Hz, 20°C
Tangent of loss angle (tan δ)
Less than or equal to the specified value at 120Hz, 20°C
ESR ( 1)
Less than or equal to the specified value at 100kHz, 20°C
Leakage Current ( 2)
Less than or equal to the specified value.
Endurance
After 2 minutes' application of rated voltage at 20°C
Test condition
105°C, rated voltage 2000 / 5000Hrs.
Capacitance change
Within ±20% of initial value before test
tan δ
150% or less than the initial specified value
ESR( 1)
150% or less than the initial specified value
Leakage current ( 2)
Less than or equal to the initial specified value
0.1% / 1000Hrs. Max (60%CL)
Failure Rate
1 ESR should be measured at both of the terminal ends closest to the capacitor body.
2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Size List (ESR)
Cap [µF]
R.V.(V)
S.V.(
V)
[φD×L(mm)]
2.5
4.0
6.3
16
2.8
4.6
7.2
18.4
100
[φ6.3×8]
Aluminum case
Stand off
Wire(Lead free)
6.3×8
270
6.3×8
330
6.3×8
470
6.3×8
560
6.3×8
6.3×8
6.3×8
6.3×8
680
6.3×8
6.3×8
820
6.3×8
1200
6.3×8
[φ6.3×8(-H)]
Aluminum case
Wire(Lead free)
(mm)
Dimension table in next page.
φD×L
φd
P
α
6.3×8
0.6
2.5
1.0
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
S8
series
Standard Ratings
Rated Voltage Surge
Voltage
(V)
(V)
(code)
2.5
(0E)
4.0
(0G)
6.3
(0J)
16
(1C)
2.8
Rated
Case Size
Capacitance
φD×L (mm)
(µF)
18.4
Leakage
Rated Ripple
ESL
ESR
Current
Current
(Typ.)
(mΩ, 100kHz)
(µA, 2min.)
(nH, 10MHz) (mArms)
NICHICON
FPCAP
330
6.3×8
0.10
500
7
2
5600
RS80E331MDN1□□
FP-2R5RE331M-S8□□
330
6.3×8
0.10
500
7
2
5600
RS80E331MDNASQ□□
FP-2R5RE331M-S8□□-5K
470
6.3×8
0.10
500
7
2
5600
RS80E471MDN1□□
FP-2R5RE471M-S8□□
470
6.3×8
0.10
500
7
2
5600
RS80E471MDNASQ□□
FP-2R5RE471M-S8□□-5K
560
6.3×8
0.10
500
7
2
5600
RS80E561MDN1□□
FP-2R5RE561M-S8□□
560
6.3×8
0.10
500
7
2
5600
RS80E561MDNASQ□□
FP-2R5RE561M-S8□□-5K
820
6.3×8
0.10
512
7
2
5600
RS80E821MDN1□□
FP-2R5RE821M-S8□□
820
6.3×8
0.10
512
7
2
5600
RS80E821MDNASQ□□
FP-2R5RE821M-S8□□-5K
1200
6.3×8
0.10
750
7
2
5600
RS80E122MDN1□□
FP-2R5RE122M-S8□□
560
6.3×8
0.10
560
7
2
5000
RS80G561MDN1□□
FP-4R0RE561M-S8□□
560
6.3×8
0.10
560
7
2
5000
RS80G561MDNASQ□□
FP-4R0RE561M-S8□□-5K
330
6.3×8
0.10
519
8
2
5000
RS80J331MDN1□□
FP-6R3RE331M-S8□□
330
6.3×8
0.10
519
8
2
5000
RS80J331MDNASQ□□
FP-6R3RE331M-S8□□-5K
470
6.3×8
0.10
740
8
2
5000
RS80J471MDN1□□
FP-6R3RE471M-S8□□
470
6.3×8
0.10
740
8
2
5000
RS80J471MDNASQ□□
FP-6R3RE471M-S8□□-5K
560
6.3×8
0.10
882
8
2
5000
RS80J561MDN1□□
FP-6R3RE561M-S8□□
560
6.3×8
0.10
882
8
2
5000
RS80J561MDNASQ□□
FP-6R3RE561M-S8□□-5K
680
6.3×8
0.10
1071
8
2
4700
RS80J681MCN1□□
FP-6R3RE681M-S8□□-H
100
6.3×8
0.10
500
14
2
3800
RS81C101MDN1□□
FP-016RE101M-S8□□
270
6.3×8
0.10
1296
15
2
3800
RS81C271MDN1□□
FP-016RE271M-S8□□
4.6
7.2
tan δ
Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
: Load life 5000hours.
Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.)
2.5V 560µF(Standard)
Impedance
2.5V 560 µF(Standard)
Frequency (kHz)
Frequency (kHz)
Taping specifications are given in page 26, 27.
Please refer to page 3 for the minimum order quantity.
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
F8
Low ESR / ESL, Low Profile (φ5)
series
By using Functional Polymer cathode, Frequency & Temp. characteristics are greatly improved.
Low ESR and Low ESL at a high frequency range.
High ripple current capability.
Long life and high reliability.
<Applications>
Switching Power Supply and DC/DC Converter.
Back up Power Supplies of CPU(VRM etc.)
Miniature high Power Supply.
<Environmental Correspondence>
Compliant to the RoHS directive
(2011/65/EU).
The Lead-free of terminal plating(Sn).
Specifications
Item
Performance Characteristics
Category Temperature Range
–55 to +105°C
Rated Voltage Range
2.5 to 6.3V
Rated Capacitance Range
100 to 560µF
Capacitance Tolerance
±20% at 120Hz, 20°C
Tangent of loss angle (tan δ)
Less than or equal to the specified value at 120Hz, 20°C
ESR ( 1)
Less than or equal to the specified value at 100kHz, 20°C
Leakage Current ( 2)
Less than or equal to the specified value.
Endurance
After 2 minutes' application of rated voltage at 20°C
Test condition
105°C, rated voltage 2000Hrs.
Capacitance change
Within ±20% of initial value before test
tan δ
150% or less than the initial specified value
ESR( 1)
150% or less than the initial specified value
Leakage current ( 2)
Less than or equal to the initial specified value
0.1% / 1000Hrs. Max (60%CL)
Failure Rate
1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform.
2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Size List (ESR)
Cap [µF]
R.V.(V)
S.V.(
V)
100
Aluminum case
[φD×L(mm)]
2.5
4.0
6.3
2.8
4.6
7.2
Stand off
Wire(Lead free)
5×8
270
5×8
330
5×8
470
5×8
560
5×8
5×8
(mm)
Dimension table in next page.
φD×L
φd
P
α
5×8
0.6
2.0
1.0
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
F8
series
Standard Ratings
Rated Voltage Surge
Voltage
(V)
(V)
(code)
2.5
(0E)
4.0
(0G)
6.3
(0J)
Rated
Case Size
Capacitance
φD×L (mm)
(µF)
tan δ
Leakage
Rated Ripple
ESL
ESR
Current
Current
(Typ.)
(mΩ, 100kHz)
(µA, 2min.)
(nH, 10MHz) (mArms)
NICHICON
FPCAP
100
5×8
0.10
500
7
1.5
4200
RF80E101MDN1□□
FP-2R5RE101M-F8□□
330
5×8
0.10
500
7
1.5
4200
RF80E331MDN1□□
FP-2R5RE331M-F8□□
470
5×8
0.10
500
7
1.5
4200
RF80E471MDN1□□
FP-2R5RE471M-F8□□
560
5×8
0.10
500
7
1.5
4200
RF80E561MDN1□□
FP-2R5RE561M-F8□□
4.6
330
5×8
0.10
500
8
1.5
4000
RF80G331MDN1□□
FP-4R0RE331M-F8□□
7.2
270
5×8
0.10
500
11
1.5
3700
RF80J271MDN1□□
FP-6R3RE271M-F8□□
2.8
Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.)
2.5V 560µF
Impedance
2.5V 560µF
Frequency (kHz)
Frequency (kHz)
Taping specifications are given in page 26, 27.
Please refer to page 3 for the minimum order quantity.
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
NU
Higher Capacitance
series
By using Functional Polymer cathode, Frequency & Temp. characteristics are greatly improved.
Low ESR at a high frequency range.
High ripple current capability.
Long life and high reliability.
<Applications>
Switching Power Supply and DC/DC Converter.
Back up Power Supplies of CPU(VRM etc.)
Miniature high Power Supply.
<Environmental Correspondence>
Compliant to the RoHS directive
(2011/65/EU).
The Lead-free of terminal plating(Sn).
Specifications
Item
Performance Characteristics
Category Temperature Range
–55 to +105°C
Rated Voltage Range
2.5 to 63V
Rated Capacitance Range
10 to 2700µF
Capacitance Tolerance
±20% at 120Hz, 20°C
Tangent of loss angle (tan δ)
Less than or equal to the specified value at 120Hz, 20°C
ESR ( 1)
Less than or equal to the specified value at 100kHz, 20°C
Leakage Current ( 2)
Less than or equal to the specified value.
Endurance
After 2 minutes' application of rated voltage at 20°C
Test condition
105°C, rated voltage 2000 / 5000Hrs.
Capacitance change
Within ±20% of initial value before test
tan δ
150% or less than the initial specified value
ESR( 1)
150% or less than the initial specified value
Leakage current ( 2)
Less than or equal to the initial specified value
0.1% / 1000Hrs. Max (60%CL)
Failure Rate
1 ESR should be measured at both of the terminal ends closest to the capacitor body.
2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Size List (ESR)
Cap [µF]
R.V.(V)
S.V.(
V)
4.0
6.3
10
16
25
35
50
63
2.8
4.6
7.2
11.5
18.4
28.7
40.2
57.5
72.5
10
8×11.5
8×11.5
39
8×11.5 10×12.5
47
8×11.5
8×11.5 10×12.5
8×11.5
10×12.5
56
10×12.5
68
100
6.3×10
8×11.5
220
6.3×10
P
α
1.0
0.45
1.5
8×11.5
0.5
2.5
1.0
8×11.5
8×11.5
0.6
3.5
1.5
10×12.5
0.6
5.0
1.5
270
8×11.5
330
8×11.5 10×12.5
390
φd
4×5
10×12.5
180
(mm)
φD×L
6.3×10
150
10×12.5
470
680
8×11.5
10×12.5
8×11.5
10×12.5
820
8×11.5
8×11.5
1000
8×11.5
8×11.5
1200
8×11.5
8×11.5
8×11.5 10×12.5
10×12.5
10×12.5
1800
10×12.5
2200
2700
Stand off
Wire(Lead free)
4×5
33
1500
Aluminum case
[φD×L(mm)]
2.5
10×12.5
Dimension table in next page.
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
NU
series
Standard Ratings
Rated Voltage Surge
Voltage
(V)
(V)
(code)
2.5
(0E)
4.0
(0G)
6.3
(0J)
10
(1A)
16
(1C)
25
(1E)
35
(1V)
50
(1H)
63
(1J)
2.8
4.6
7.2
11.5
18.4
28.7
40.2
57.5
72.5
Rated
Capacitance
(µF)
Leakage
Current
(µA, 2min.)
ESR
(mΩ, 100kHz)
Rated Ripple
Current
(mArms)
Case Size
φD×L (mm)
tan δ
1500
8×11.5
0.08
938
7
5700
RNU0E152MDN1□□
FP-2R5RE152M-NU□□
2700
10×12.5
0.08
1350
7
6100
RNU0E272MDN1□□
FP-2R5RE272M-NU□□
820
8×11.5
0.08
656
7
5700
RNU0G821MDN1□□
FP-4R0RE821M-NU□□
1000
8×11.5
0.08
800
7
5700
RNU0G102MDN1□□
FP-4R0RE102M-NU□□
1200
8×11.5
0.08
960
7
5700
RNU0G122MDN1□□
FP-4R0RE122M-NU□□
1800
10×12.5
0.08
1440
7
6100
RNU0G182MDN1□□
FP-4R0RE182M-NU□□
2200
10×12.5
0.08
1760
7
6100
RNU0G222MDN1□□
FP-4R0RE222M-NU□□
220
6.3×10
0.08
277
20
3200
RNU0J221MDS1□□
FP-6R3RE221M-NU□□
470
8×11.5
0.08
592
7
5700
RNU0J471MDN1□□
FP-6R3RE471M-NU□□
680
8×11.5
0.08
857
7
5700
RNU0J681MDN1□□
FP-6R3RE681M-NU□□
820
8×11.5
0.08
1033
7
5700
RNU0J821MDN1□□
FP-6R3RE821M-NU□□
1000
8×11.5
0.08
1260
7
5700
RNU0J102MDN1□□
FP-6R3RE102M-NU□□
1200
8×11.5
0.08
1512
9
6100
RNU0J122MDN1□□
FP-6R3RE122M-NU□□
1500
10×12.5
0.08
1890
7
6100
RNU0J152MDN1□□
FP-6R3RE152M-NU□□
10
4×5
0.12
300
220
700
RNU1A100MDS1□□
FP-010RE100M-NU□□
10
4×5
0.12
300
220
700
RNU1A100MDSASQ□□
FP-010RE100M-NU□□-5K
1200
10×12.5
0.08
2400
9
6200
RNU1A122MDN1□□
FP-010RE122M-NU□□
100
6.3×10
0.08
320
25
2820
RNU1C101MDS1□□
FP-016RE101M-NU□□
100
6.3×10
0.08
320
25
2820
RNU1C101MDSASQ□□
FP-016RE101M-NU□□-5K
180
8×11.5
0.08
576
8
5700
RNU1C181MDN1□□
FP-016RE181M-NU□□
270
8×11.5
0.08
864
8
5000
RNU1C271MDN1□□
FP-016RE271M-NU□□
270
8×11.5
0.08
864
8
5000
RNU1C271MDNASQ□□
FP-016RE271M-NU□□-5K
330
8×11.5
0.08
1056
8
6100
RNU1C331MDN1□□
FP-016RE331M-NU□□
470
10×12.5
0.08
1504
10
6100
RNU1C471MDN1□□
FP-016RE471M-NU□□
470
10×12.5
0.08
1504
10
6100
RNU1C471MDNASQ□□
FP-016RE471M-NU□□-5K
680
10×12.5
0.08
2176
10
6100
RNU1C681MDN1□□
FP-016RE681M-NU□□
33
8×11.5
0.12
413
24
3600
RNU1E330MDN1□□
FP-025RE330M-NU□□
47
8×11.5
0.12
588
24
3600
RNU1E470MDN1□□
FP-025RE470M-NU□□
68
8×11.5
0.12
850
24
3600
RNU1E680MDN1□□
FP-025RE680M-NU□□
180
8×11.5
0.12
900
16
4650
RNU1E181MDN1□□
FP-025RE181M-NU□□
220
8×11.5
0.12
1100
16
4650
RNU1E221MDN1□□
FP-025RE221M-NU□□
330
10×12.5
0.12
1650
14
5000
RNU1E331MDN1□□
FP-025RE331M-NU□□
390
10×12.5
0.12
1950
14
5000
RNU1E391MDN1□□
FP-025RE391M-NU□□
47
8×11.5
0.12
329
24
3600
RNU1V470MDN1□□
FP-035RE470M-NU□□
150
10×12.5
0.12
1050
20
3800
RNU1V151MDN1□□
FP-035RE151M-NU□□
39
8×11.5
0.12
390
25
2400
RNU1H390MDN1□□
FP-050RE390M-NU□□
47
10×12.5
0.12
470
24
2700
RNU1H470MDN1□□
FP-050RE470M-NU□□
68
10×12.5
0.12
680
24
2700
RNU1H680MDN1□□
FP-050RE680M-NU□□
33
8×11.5
0.12
416
26
2300
RNU1J330MDN1□□
FP-063RE330M-NU□□
39
10×12.5
0.12
492
25
2600
RNU1J390MDN1□□
FP-063RE390M-NU□□
56
10×12.5
0.12
706
25
2600
RNU1J560MDN1□□
FP-063RE560M-NU□□
NICHICON
FPCAP
Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C.
: Load life 5000hours.
Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.)
6.3V 470 µF
Impedance
6.3V 470 µ F
Frequency (kHz)
Taping specifications are given in page 26, 27.
Please refer to page 3 for the minimum order quantity.
Frequency (kHz)
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
NE
Higher Capacitance
series
By using Functional Polymer cathode, Frequency & Temp. characteristics are greatly improved.
Low ESR at a high frequency range.
High ripple current capability.
Long life and high reliability.
<Applications>
Switching Power Supply and DC/DC Converter.
Back up Power Supplies of CPU(VRM etc.)
Miniature high Power Supply.
<Environmental Correspondence>
Compliant to the RoHS directive
(2011/65/EU).
The Lead-free of terminal plating(Sn).
Specifications
Item
Performance Characteristics
Category Temperature Range
–55 to +105°C
Rated Voltage Range
2.5 to 16V
Rated Capacitance Range
100 to 1200µF
Capacitance Tolerance
±20% at 120Hz, 20°C
Tangent of loss angle (tan δ)
Less than or equal to the specified value at 120Hz, 20°C
ESR ( 1)
Less than or equal to the specified value at 100kHz, 20°C
Leakage Current ( 2)
Less than or equal to the specified value.
Endurance
After 2 minutes' application of rated voltage at 20°C
Test condition
105°C, rated voltage 2000Hrs.
Capacitance change
Within ±20% of initial value before test
tan δ
150% or less than the initial specified value
ESR( 1)
150% or less than the initial specified value
Leakage current ( 2)
Less than or equal to the initial specified value
0.1% / 1000Hrs. Max (60%CL)
Failure Rate
1 ESR should be measured at both of the terminal ends closest to the capacitor body.
2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Size List (ESR)
Cap [µF]
R.V.(V)
S.V.(
V)
6.3
10
16
2.8
7.2
11.5
18.4
100
6.3×10
5×8
270
470
8×11.5
8×6
820
10×12.5
1000
10×12.5
1200
Stand off
Wire(Lead free)
5×10
220
680
Aluminum case
[φD×L(mm)]
2.5
8×9
Dimension table in next page.
(mm)
φD×L
φd
P
α
5×8
0.5
2.0
1.0
5×10
0.5
2.0
1.0
6.3×10
0.5
2.5
1.0
8×6
0.6
3.5
1.0
8×9
0.6
3.5
1.0
8×11.5
0.6
3.5
1.5
10×12.5
0.6
5.0
1.5
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
NE
series
Standard Ratings
Rated Voltage Surge
Voltage
(V)
(V)
(code)
2.5
(0E)
2.8
6.3
(0J)
7.2
10
(1A)
11.5
16
(1C)
Rated
Capacitance
(µF)
Case Size
φD×L (mm)
tan δ
Leakage
Current
(µA, 2min.)
ESR
(mΩ, 100kHz)
Rated Ripple
Current
(mArms)
NICHICON
FPCAP
680
8×6
0.10
500
8
4900
RNE0E681MDN1□□
FP-2R5RE681M-NE□□
270
5×8
0.10
500
12
3600
RNE0J271MDS1□□
FP-6R3RE271M-NE□□
1200
8×9
0.08
1512
10
5700
RNE0J122MDN1□□
FP-6R3RE122M-NE□□
220
6.3×10
0.08
440
30
2500
RNE1A221MDS1□□
FP-010RE221M-NE□□
100
5×10
0.08
320
35
2300
RNE1C101MDS1□□
FP-016RE101M-NE□□
470
8×11.5
0.08
1504
10
5400
RNE1C471MDN1□□
FP-016RE471M-NE□□
820
10×12.5
0.08
2624
11
5600
RNE1C821MDN1□□
FP-016RE821M-NE□□
1000
10×12.5
0.08
3200
10
6100
RNE1C102MDN1□□
FP-016RE102M-NE□□
18.4
Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.)
µ
Impedance
µ
Frequency (kHz)
Frequency (kHz)
Taping specifications are given in page 26, 27.
Please refer to page 3 for the minimum order quantity.
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
S6
Miniature Sized, Higher Capacitance
series
By using Functional Polymer cathode, Frequency & Temp. characteristics are greatly improved.
Low ESR at a high frequency range.
High ripple current capability.
Long life and high reliability.
<Applications>
Switching Power Supply and DC/DC Converter.
Back up Power Supplies of CPU(VRM etc.)
Miniature high Power Supply.
<Environmental Correspondence>
Compliant to the RoHS directive
(2011/65/EU).
The Lead-free of terminal plating(Sn).
Specifications
Item
Performance Characteristics
Category Temperature Range
–55 to +105°C
Rated Voltage Range
2.5 to 25V
Rated Capacitance Range
33 to 560µF
Capacitance Tolerance
±20% at 120Hz, 20°C
Tangent of loss angle (tan δ)
Less than or equal to the specified value at 120Hz, 20°C
ESR ( 1)
Less than or equal to the specified value at 100kHz, 20°C
Leakage Current ( 2)
Less than or equal to the specified value.
Endurance
After 2 minutes' application of rated voltage at 20°C
Test condition
105°C, rated voltage 2000Hrs.
Capacitance change
Within ±20% of initial value before test
tan δ
150% or less than the initial specified value
ESR( 1)
150% or less than the initial specified value
Leakage current ( 2)
Less than or equal to the initial specified value
0.1% / 1000Hrs. Max (60%CL)
Failure Rate
1 ESR should be measured at both of the terminal ends closest to the capacitor body.
2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
[φ6.3×6]
Size List (ESR)
Cap [µF]
R.V.(V)
S.V.(
V)
2.5
10
16
25
2.8
11.5
18.4
28.7
33
Stand off
Wire(Lead free)
6.3×5
100
6.3×6
6.3×5
150
560
Aluminum case
[φD×L(mm)]
6.3×5
[φ6.3×5 / φ6.3×6(-H)]
Aluminum case
Wire(Lead free)
(mm)
φd
P
α
6.3×5
0.5
2.5
1.0
6.3×6
0.45
2.5
1.0
φD×L
Dimension table in next page.
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
S6
series
Standard Ratings
Rated Voltage Surge
Voltage
(V)
(V)
(code)
Rated
Capacitance
(µF)
Case Size
φD×L (mm)
tan δ
Leakage
Current
(µA, 2min.)
ESR
(mΩ, 100kHz)
Rated Ripple
Current
(mArms)
NICHICON
FPCAP
2.5
(0E)
10
(1A)
2.8
560
6.3×5
0.12
700
13
3600
RS60E561MCN1□□
FP-2R5RE561M-S6□□
11.5
150
6.3×5
0.10
450
25
2500
RS61A151MCN1□□
FP-010RE151M-S6□□
16
(1C)
100
6.3×6
0.10
500
24
18.4
2490
RS61C101MDS1□□
FP-016RE101M-S6□□
100
6.3×6
0.10
500
24
2490
RS61C101MCS1□□
FP-016RE101M-S6□□-H
25
(1E)
28.7
33
6.3×5
0.10
165
60
1700
RS61E330MCN1□□
FP-025RE330M-S6□□
Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.)
µ
Impedance
µ
Frequency (kHz)
Frequency (kHz)
Taping specifications are given in page 26, 27.
Please refer to page 3 for the minimum order quantity.
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
HT
High Temperature (125°C)
series
By using Functional Polymer cathode, Frequency & Temp. characteristics are greatly improved.
Low ESR at a high frequency range.
High ripple current capability.
Guaranteed at 125 degrees and high reliability.
<Applications>
Switching Power Supply and DC/DC Converter.
Back up Power Supplies of CPU(VRM etc.)
Miniature high Power Supply.
<Environmental Correspondence>
Compliant to the RoHS directive
(2011/65/EU).
The Lead-free of terminal plating(Sn).
Specifications
Item
Performance Characteristics
Category Temperature Range
–55 to +125°C
Rated Voltage Range
6.3 to 20V
Rated Capacitance Range
150 to 820µF
Capacitance Tolerance
±20% at 120Hz, 20°C
Tangent of loss angle (tan δ)
Less than or equal to the specified value at 120Hz, 20°C
ESR ( 1)
Less than or equal to the specified value at 100kHz, 20°C
Leakage Current ( 2)
Endurance
Less than or equal to the specified value.
After 2 minutes' application of rated voltage at 20°C
Test condition
125°C, rated voltage 1000Hrs.
Capacitance change
Within ±20% of initial value before test
tan δ
150% or less than the initial specified value
ESR( 1)
150% or less than the initial specified value
Leakage current ( 2)
Less than or equal to the initial specified value
0.5% / 1000Hrs. Max (60%CL)
Failure Rate
1 ESR should be measured at both of the terminal ends closest to the capacitor body.
2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Size List (ESR)
Cap [µF]
R.V.(V)
S.V.(
V)
Aluminum case
[φD×L(mm)]
6.3
10
16
20
7.2
11.5
18.4
23.0
150
Stand off
Wire(Lead free)
10×12.5
8×11.5
220
270
10×12.5
330
8×11.5
390
8×11.5
560
10×12.5
680
10×12.5
820
10×12.5
10×12.5
Dimension table in next page.
(mm)
φD×L
φd
P
α
8×11.5
0.6
3.5
1.5
10×12.5
0.6
5.0
1.5
CAT.8100C
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
HT
series
Standard Ratings
Rated Voltage Surge
Voltage
(V)
(V)
(code)
6.3
(0J)
10
(1A)
Case Size
φD×L (mm)
tan δ
680
10×12.5
0.12
857
12
5450
820
10×12.5
0.12
1033
12
220
8×11.5
0.12
440
330
8×11.5
0.12
390
8×11.5
560
7.2
NICHICON
FPCAP
1740
RHT0J681MDN1□□
FP-6R3RE681M-HT□□
5450
1740
RHT0J821MDN1□□
FP-6R3RE821M-HT□□
17
3950
1260
RHT1A221MDN1□□
FP-010RE221M-HT□□
660
17
3950
1260
RHT1A331MDN1□□
FP-010RE331M-HT□□
0.12
780
16
3950
1260
RHT1A391MDN1□□
FP-010RE391M-HT□□
10×12.5
0.12
1120
13
5250
1680
RHT1A561MDN1□□
FP-010RE561M-HT□□
270
10×12.5
0.12
864
16
4750
1520
RHT1C271MDN1□□
FP-016RE271M-HT□□
330
10×12.5
0.12
1056
16
4750
1520
RHT1C331MDN1□□
FP-016RE331M-HT□□
150
10×12.5
0.12
600
20
4350
1390
RHT1D151MDN1□□
FP-020RE151M-HT□□
11.5
16
(1C)
18.4
20
(1D)
23.0
Rated Ripple Current
Leakage
ESR
(mArms)
Current
(mΩ, 100kHz)
(µA, 2min.)
Rated
Capacitance
(µF)
Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
: At ambient temperature
Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.)
16V 330µF
Impedance
16V 330µ F
Frequency (kHz)
Frequency (kHz)
Taping specifications are given in page 26, 27.
Please refer to page 3 for the minimum order quantity.
CAT.8100C