CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS NU High Capacitance series Low ESR, High Capacitance, High ripple current. Load life of 2000/5000 hours at 105°C. Radial lead type : Lead free flow soldering condition correspondence. Compliant to the RoHS directive (2011/65/EU). NS Higher Capacitance NU Higher Capacitance NE Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 2.5 to 63V Rated Capacitance Range 10 to 2700µF Capacitance Tolerance ±20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Less than or equal to the specified value. Leakage Current ( 2) Endurance After 2 minutes' application of rated voltage at 20°C Test condition 105°C, rated voltage 2000 / 5000Hrs. Capacitance change Within ±20% of initial value before test tan δ 150% or less than the initial specified value ESR( 1) 150% or less than the initial specified value Leakage current ( 2) Less than or equal to the initial specified value 1 ESR should be measured at both of the terminal ends closest to the capacitor body. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. Size List Cap [µF] R.V.(V) S.V.( V) 4.0 6.3 10 16 25 35 50 63 2.8 4.6 7.2 11.5 18.4 28.7 40.2 57.5 72.5 10 8×11.5 8×11.5 39 8×11.5 10×12.5 47 8×11.5 8×11.5 10×12.5 8×11.5 10×12.5 56 10×12.5 68 100 6.3×10 8×11.5 220 6.3×10 P α 1.0 0.45 1.5 8×11.5 0.5 2.5 1.0 8×11.5 8×11.5 0.6 3.5 1.5 10×12.5 0.6 5.0 1.5 270 8×11.5 330 8×11.5 10×12.5 390 φd 4×5 10×12.5 180 (mm) φD×L 6.3×10 150 10×12.5 470 10×12.5 8×11.5 680 10×12.5 8×11.5 820 8×11.5 8×11.5 1000 8×11.5 8×11.5 1200 8×11.5 8×11.5 8×11.5 8×11.5 10×12.5 10×12.5 10×12.5 1800 10×12.5 2200 2700 Stand off Wire(Lead free) 4×5 33 1500 Aluminum case [φD×L(mm)] 2.5 10×12.5 Dimension table in next page. CAT.8100D CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS NU series Standard Ratings Rated Voltage Surge Voltage (V) (V) (code) 2.5 (0E) 4.0 (0G) 6.3 (0J) 10 (1A) 16 (1C) 25 (1E) 35 (1V) 50 (1H) 63 (1J) Rated Capacitance (µF) 2.8 4.6 7.2 11.5 18.4 28.7 40.2 57.5 72.5 Leakage Current (µA, 2min.) ESR (mΩ, 100kHz) Rated Ripple Current (mArms) Case Size φD×L (mm) tan δ 1500 8×11.5 0.08 938 7 5700 RNU0E152MDN1□□ FP-2R5RE152M-NU□□ 2700 10×12.5 0.08 1350 7 6100 RNU0E272MDN1□□ FP-2R5RE272M-NU□□ 820 8×11.5 0.08 656 7 5700 RNU0G821MDN1□□ FP-4R0RE821M-NU□□ 1000 8×11.5 0.08 800 7 5700 RNU0G102MDN1□□ FP-4R0RE102M-NU□□ 1200 8×11.5 0.08 960 7 5700 RNU0G122MDN1□□ FP-4R0RE122M-NU□□ 1800 10×12.5 0.08 1440 7 6100 RNU0G182MDN1□□ FP-4R0RE182M-NU□□ 2200 10×12.5 0.08 1760 7 6100 RNU0G222MDN1□□ FP-4R0RE222M-NU□□ 220 6.3×10 0.08 277 20 3200 RNU0J221MDS1□□ FP-6R3RE221M-NU□□ 470 8×11.5 0.08 592 7 5700 RNU0J471MDN1□□ FP-6R3RE471M-NU□□ 680 8×11.5 0.08 857 7 5700 RNU0J681MDN1□□ FP-6R3RE681M-NU□□ 820 8×11.5 0.08 1033 7 5700 RNU0J821MDN1□□ FP-6R3RE821M-NU□□ 1000 8×11.5 0.08 1260 7 5700 RNU0J102MDN1□□ FP-6R3RE102M-NU□□ 1200 8×11.5 0.08 1512 9 6100 RNU0J122MDN1□□ FP-6R3RE122M-NU□□ 1500 10×12.5 0.08 1890 7 6100 RNU0J152MDN1□□ FP-6R3RE152M-NU□□ 10 4×5 0.12 300 220 700 RNU1A100MDS1□□ FP-010RE100M-NU□□ 10 4×5 0.12 300 220 700 RNU1A100MDSASQ□□ FP-010RE100M-NU□□-5K 820 8×11.5 0.08 1640 10 5800 RNU1A821MDN1□□ FP-010RE821M-NU□□ 1200 10×12.5 0.08 2400 9 6200 RNU1A122MDN1□□ FP-010RE122M-NU□□ 100 6.3×10 0.08 320 25 2820 RNU1C101MDS1□□ FP-016RE101M-NU□□ 100 6.3×10 0.08 320 25 2820 RNU1C101MDSASQ□□ FP-016RE101M-NU□□-5K 180 8×11.5 0.08 576 8 5700 RNU1C181MDN1□□ FP-016RE181M-NU□□ 270 8×11.5 0.08 864 8 5000 RNU1C271MDN1□□ FP-016RE271M-NU□□ 270 8×11.5 0.08 864 8 5000 RNU1C271MDNASQ□□ FP-016RE271M-NU□□-5K 330 8×11.5 0.08 1056 8 6100 RNU1C331MDN1□□ FP-016RE331M-NU□□ 470 10×12.5 0.08 1504 10 6100 RNU1C471MDN1□□ FP-016RE471M-NU□□ 470 10×12.5 0.08 1504 10 6100 RNU1C471MDNASQ□□ FP-016RE471M-NU□□-5K 680 10×12.5 0.08 2176 10 6100 RNU1C681MDN1□□ FP-016RE681M-NU□□ 33 8×11.5 0.12 413 24 3600 RNU1E330MDN1□□ FP-025RE330M-NU□□ 47 8×11.5 0.12 588 24 3600 RNU1E470MDN1□□ FP-025RE470M-NU□□ 68 8×11.5 0.12 850 24 3600 RNU1E680MDN1□□ FP-025RE680M-NU□□ 180 8×11.5 0.12 900 16 4650 RNU1E181MDN1□□ FP-025RE181M-NU□□ 220 8×11.5 0.12 1100 16 4650 RNU1E221MDN1□□ FP-025RE221M-NU□□ 330 10×12.5 0.12 1650 14 5000 RNU1E331MDN1□□ FP-025RE331M-NU□□ 390 10×12.5 0.12 1950 14 5000 RNU1E391MDN1□□ FP-025RE391M-NU□□ 47 8×11.5 0.12 329 24 3600 RNU1V470MDN1□□ FP-035RE470M-NU□□ 150 10×12.5 0.12 1050 20 3800 RNU1V151MDN1□□ FP-035RE151M-NU□□ 39 8×11.5 0.12 390 25 2400 RNU1H390MDN1□□ FP-050RE390M-NU□□ 47 10×12.5 0.12 470 24 2700 RNU1H470MDN1□□ FP-050RE470M-NU□□ 68 10×12.5 0.12 680 24 2700 RNU1H680MDN1□□ FP-050RE680M-NU□□ 33 8×11.5 0.12 416 26 2300 RNU1J330MDN1□□ FP-063RE330M-NU□□ 39 10×12.5 0.12 492 25 2600 RNU1J390MDN1□□ FP-063RE390M-NU□□ 56 10×12.5 0.12 706 25 2600 RNU1J560MDN1□□ FP-063RE560M-NU□□ NICHICON FPCAP : Load life 5000hours. Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.) 6.3V 470 µF Impedance 6.3V 470 µF Frequency (kHz) Taping specifications are given in page 26, 27. Please refer to page 3 for the minimum order quantity. Frequency (kHz) CAT.8100D