CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS UA / UB series Resin-molded Chip, Low-Profile (7.3 × 4.3 × 1.9) By using Functional Polymer cathode, Frequency & Temp. characteristics are greatly improved. Low ESR at a high frequency range. High ripple current capability. <Applications> Switching Power Supply and DC/DC Converter. Back up Power Supplies of CPU(VRM etc.) Miniature high Power Supply. <Environmental Correspondence> Compliant to the RoHS directive (2011/65/EU). The Lead-free of terminal plating. Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 2.0 to 25V Rated Capacitance Range 15 to 330µF Capacitance Tolerance ±20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Leakage Current ( 2) Less than or equal to the specified value. Endurance Damp Heat (Steady State) After 2 minutes' application of rated voltage at 20°C Test condition 105°C, rated voltage 1000Hrs. Capacitance change Within ±20% of initial value before test tan δ 150% or less than the initial specified value Leakage current ( 2) Less than or equal to the initial specified value Test condition 60°C, 90 to 95%RH, No Bias, 500Hrs. Capacitance change Within +50% to -20% of initial value before test tan δ 200% or less than the initial specified value Leakage current ( 2) 300% or less than the initial specified value 0.5% / 1000Hrs. Max (60%CL) Failure Rate 1 ESR should be measured at both of the terminal ends closest to the capacitor body. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. Recommended land Size (mm) Size Code (ESR) R.V.(V) S.V.( V) se Cap [µF] rie s L×W×H X Y a 7.3 × 4.3 × 1.9 2.9 2.05 4.1 [Upper value : Size Code, Lower value : ESR(mΩ)] 2.0 4.0 6.3 16 25 2.3 4.6 7.2 18.4 28.7 UA UB UA UA UB UA UB L (65) L (40) 15 27 L (25) 100 L (18) 150 220 270 330 L (15) L (9) L (9) L (9) Dimension table in next page. UA L (70) UB L (40) L H Z Z L (15) (mm) Size Code L±0.2 W1±0.2 W2 ±0.1 H ±0.1 Z±0.2 L 7.3 4.3 2.4 1.9 1.3 CAT.8100C CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS UA / UB series Standard Ratings Rated Voltage Surge Voltage (V) (V) (code) 2.0 (0D) Case Size L×W×H (mm) tan δ Leakage Current (µA, 2min.) ESR (mΩ, 100kHz) Rated Ripple Current (mArms) NICHICON FPCAP MSL (J-STD-020D) 220 7.3×4.3×1.9 0.12 700 15 2800 RUA0D221MLG FP-2R0CM221M-UAR Level 3 220 7.3×4.3×1.9 0.12 700 9 3300 RUB0D221MLG FP-2R0CM221M-UBR Level 3 270 7.3×4.3×1.9 0.12 700 9 3300 RUB0D271MLG FP-2R0CM271M-UBR Level 3 330 7.3×4.3×1.9 0.12 700 9 3300 RUB0D331MLG FP-2R0CM331M-UBR Level 3 150 7.3×4.3×1.9 0.12 700 18 2600 RUA0G151MLG FP-4R0CM151M-UAR Level 3 100 7.3×4.3×1.9 0.12 700 25 2300 RUA0J101MLG FP-6R3CM101M-UAR Level 3 100 7.3×4.3×1.9 0.12 700 15 2800 RUB0J101MLG FP-6R3CM101M-UBR Level 3 27 7.3×4.3×1.9 0.12 216 65 1100 RUA1C270MLG FP-016CM270M-UAR Level 3 27 7.3×4.3×1.9 0.12 216 40 1400 RUB1C270MLG FP-016CM270M-UBR Level 3 15 7.3×4.3×1.9 0.12 188 70 1000 RUA1E150MLG FP-025CM150M-UAR Level 3 15 7.3×4.3×1.9 0.12 188 40 1400 RUB1E150MLG FP-025CM150M-UBR Level 3 2.3 4.0 (0G) 4.6 6.3 (0J) 7.2 16 (1C) 18.4 25 (1E) Rated Capacitance (µF) 28.7 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.) 16V 27µF (UA series) 25V 15µF (UA series) Impedance 16V 27µF (UA series) 25V 15µF (UA series) Frequency (kHz) Frequency (kHz) Taping specifications are given in page 28. Recommended land size, soldering by reflow are given in page 25. Please refer to page 3 for the minimum order quantity. CAT.8100C