CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS NS Standard series Low ESR, High ripple current. Load life of 2000 hours at 105°C. Radial lead type : Lead free flow soldering condition correspondence. Compliant to the RoHS directive (2011/65/EU). NS Lower ESR R7 Higher Capacitance NU Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 4.0 to 25V Rated Capacitance Range 10 to 1200µF Capacitance Tolerance ±20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Leakage Current ( 2) Less than or equal to the specified value. Endurance After 2 minutes' application of rated voltage at 20°C Test condition 105°C, rated voltage 2000Hrs. Capacitance change Within ±20% of initial value before test tan δ 150% or less than the initial specified value ESR( 1) 150% or less than the initial specified value Leakage current ( 2) Less than or equal to the initial specified value 1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. Size List Cap [µF] R.V.(V) S.V.( V) 4.0 6.3 10 16 20 25 4.6 7.2 11.5 18.4 23.0 28.7 6.3×7 6.3×10 10 22 33 6.3×7 47 6.3×7 6.3×7 6.3×7 8×11.5 6.3×7 6.3×10 10×12.5 10×12.5 6.3×10 8×11.5 68 6.3×10 8×11.5 8×11.5 100 8×11.5 8×11.5 10×12.5 10×12.5 150 8×11.5 180 220 8×11.5 330 10×12.5 390 8×11.5 470 (mm) φD×L φd P α 10×12.5 6.3×7 0.45 2.5 1.0 8×11.5 6.3×10 0.5 2.5 1.0 8×11.5 0.6 3.5 1.5 10×12.5 0.6 5.0 1.5 10×12.5 10×12.5 10×12.5 8×11.5 680 10×12.5 820 10×12.5 10×12.5 1000 1200 Stand off Wire(Lead free) 6.3×7 15 560 Aluminum case [φD×L(mm)] 10×12.5 10×12.5 Dimension table in next page. CAT.8100D CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS NS series Standard Ratings Rated Voltage Surge Voltage (V) (V) (code) 4.0 (0G) 6.3 (0J) 10 (1A) 16 (1C) 20 (1D) 25 (1E) 4.6 7.2 11.5 18.4 23.0 28.7 Rated Capacitance (µF) Case Size φD×L (mm) tan δ Leakage Current (µA, 2min.) ESR (mΩ, 100kHz) Rated Ripple Current (mArms) NICHICON FPCAP 560 8×11.5 0.08 336 10 5230 RNS0G561MDN1□□ FP-4R0RE561M-NS□□ 820 10×12.5 0.08 492 10 5500 RNS0G821MDN1□□ FP-4R0RE821M-NS□□ 1200 10×12.5 0.15 720 10 5500 RNS0G122MDN1□□ FP-4R0RE122M-NS□□ 47 6.3×7 0.07 50 42 2050 RNS0J470MDS1□□ FP-6R3RE470M-NS□□ 150 8×11.5 0.07 142 21 3900 RNS0J151MDN1□□ FP-6R3RE151M-NS□□ 220 8×11.5 0.07 208 21 3900 RNS0J221MDN1□□ FP-6R3RE221M-NS□□ 330 10×12.5 0.07 312 10 5500 RNS0J331MDN1□□ FP-6R3RE331M-NS□□ 390 8×11.5 0.08 369 10 5230 RNS0J391MDN1□□ FP-6R3RE391M-NS□□ 680 10×12.5 0.08 643 10 5500 RNS0J681MDN1□□ FP-6R3RE681M-NS□□ 820 10×12.5 0.12 775 10 5500 RNS0J821MDN1□□ FP-6R3RE821M-NS□□ 1000 10×12.5 0.12 945 10 5500 RNS0J102MDN1□□ FP-6R3RE102M-NS□□ 33 6.3×7 0.07 50 49 1900 RNS1A330MDS1□□ FP-010RE330M-NS□□ 68 6.3×10 0.07 102 35 2650 RNS1A680MDS1□□ FP-010RE680M-NS□□ 100 8×11.5 0.07 150 21 3900 RNS1A101MDN1□□ FP-010RE101M-NS□□ 220 10×12.5 0.07 330 10 5500 RNS1A221MDN1□□ FP-010RE221M-NS□□ 470 10×12.5 0.08 705 10 5500 RNS1A471MDN1□□ FP-010RE471M-NS□□ 22 6.3×7 0.06 53 49 1900 RNS1C220MDS1□□ FP-016RE220M-NS□□ 33 6.3×7 0.06 79 49 1900 RNS1C330MDS1□□ FP-016RE330M-NS□□ 47 6.3×10 0.06 113 42 2400 RNS1C470MDS1□□ FP-016RE470M-NS□□ 68 8×11.5 0.06 163 25 3600 RNS1C680MDN1□□ FP-016RE680M-NS□□ 100 8×11.5 0.06 240 21 3900 RNS1C101MDN1□□ FP-016RE101M-NS□□ 150 10×12.5 0.06 360 10 5500 RNS1C151MDN1□□ FP-016RE151M-NS□□ 180 8×11.5 0.08 432 16 4700 RNS1C181MDN1□□ FP-016RE181M-NS□□ 330 10×12.5 0.08 792 10 5500 RNS1C331MDN1□□ FP-016RE331M-NS□□ 15 6.3×7 0.06 50 63 1700 RNS1D150MDS1□□ FP-020RE150M-NS□□ 22 6.3×7 0.06 66 49 1900 RNS1D220MDS1□□ FP-020RE220M-NS□□ 33 6.3×10 0.06 99 49 2200 RNS1D330MDS1□□ FP-020RE330M-NS□□ 47 8×11.5 0.06 141 28 3400 RNS1D470MDN1□□ FP-020RE470M-NS□□ 68 8×11.5 0.06 204 25 3600 RNS1D680MDN1□□ FP-020RE680M-NS□□ 100 10×12.5 0.06 300 15 4500 RNS1D101MDN1□□ FP-020RE101M-NS□□ 10 6.3×7 0.06 50 63 1700 RNS1E100MDS1□□ FP-025RE100M-NS□□ 15 6.3×10 0.06 75 49 2200 RNS1E150MDS1□□ FP-025RE150M-NS□□ 22 8×11.5 0.06 110 28 3400 RNS1E220MDN1□□ FP-025RE220M-NS□□ 33 10×12.5 0.06 165 20 3800 RNS1E330MDN1□□ FP-025RE330M-NS□□ 47 10×12.5 0.06 235 20 3800 RNS1E470MDN1□□ FP-025RE470M-NS□□ 100 10×12.5 0.08 500 15 4500 RNS1E101MDN1□□ FP-025RE101M-NS□□ Taping specifications are given in page 26, 27. Please refer to page 3 for the minimum order quantity. CAT.8100D