ALUMINUM ELECTROLYTIC CAPACITORS SW 7mmL, For Audio Equipment series Acoustic series, with 7mm height. Compliant to the RoHS directive (2011/65/EU). SW Smaller MW Specifications Performance Characteristics Item Category Temperature Range –40 to +85˚C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 0.1 to 220µF Capacitance Tolerance ±20% at 120Hz, 20˚C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater. Measurement frequency : 120Hz at 20°C 6.3 0.24 Rated voltage (V) tan δ (MAX.) Tangent of loss angle (tan δ) 10 0.20 16 0.16 25 0.14 35 0.12 50 0.10 Measurement frequency : 120Hz 6.3 4 8 Rated voltage (V) Impedance ratio Z– 25˚C / Z + 20˚C Stability at Low Temperature ZT / Z20 (MAX.) Z– 40˚C / Z + 20˚C 10 3 6 The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C. Endurance 16 2 4 25 2 4 35 2 3 50 2 3 Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with black color letter on gold sleeve. Shelf Life Marking Type numbering system (Example : 10V 33µF) Radial Lead Type 1 Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 U SW 1 A 3 3 0 M DD φd P ±0.5 φD+0.5 MAX. Configuration Capacitance tolerance (±20%) Rated capacitance (33µF) Rated voltage (10V) L+1MAX. 15MIN Series name 4MIN (mm) φD 4 5 6.3 P 1.5 2.0 2.5 φd 0.45 0.45 0.45 Type Configuration φD Pb-free leadwire Pb-free PET sleeve 4 to 6.3 DD Dimensions 6.3 0J V Cap.(µF) 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 Code 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 4× 7 4× 7 4× 7 5× 7 6.3× 7 10 1A 34 40 48 78 120 4× 7 4× 7 5× 7 6.3× 7 16 1C 35 43 59 87 4× 4× 5× 5× 6.3× 7 7 7 7 7 25 1E 28 39 55 65 98 4× 7 5× 7 5× 7 6.3× 7 35 1V 28 48 58 71 4× 7 4× 7 5× 7 6.3× 7 24 31 52 65 50 1H 4× 7 4× 7 4× 7 4× 7 4× 7 4× 7 4× 7 4× 7 5× 7 6.3× 7 Case size φ D × L (mm) 1.0 2.3 3.5 5.0 10 19 24 28 38 58 Rated ripple Rated ripple current (mArms) at 85°C 120Hz Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more Coefficient 0.70 1.00 1.17 1.36 1.50 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100D