T255 Series Axial High Temperature Solder (CSR33 Style)

Tantalum Through-Hole Capacitors – Hermetically Sealed
T255 Series Axial High Temperature Solder (CSR33 Style)
Overview
The KEMET T255 High Temperature Solder Series of solid
tantalum capacitors offers high capacitance-to-volume
ratios and is available in standard MIL style A, B, C, and D
cases. These devices meet or exceed the environmental
and mechanical requirements of MIL–PRF–39003. Designed
to operate from -55°C to +125°C, the internal design of
these capacitors, as well as the hermetic seal, includes high
temperature solder (minimum melting point of 221°C). The
content of tin in the solder does not exceed 97%. This assembly is
especially suited for temperature conditions where solder may fail
due to undesirable solder reflow.
Benefits
Applications
• Internal construction solder to resist up to 221ºC
• Failure rate options: Graded - B, C, D, and G, and
Exponential - M, P, R, and S
• Surge current options D, E, and F
• Taped and reeled per EIA Specification RS-296
• Marking per MIL–STD–1285
• Qualified to MIL–PRF–39003 (CSR33 Style)
• Operating temperature range of -55˚C to +125˚C
• Capacitance values of 1.2 μF to 1,000 μF
• Tolerances of ±10%, and ±20%
• Voltage rating of 6 VDC – 50 VDC
• Marking per MIL–STD–1285
• Case sizes: A, B, C, D
These capacitors are ideal for coupling, bypass, filtering and timing
circuits, and are excellent substitutes for wet tantalums in low
voltage applications.
The T255 Series exhibits exceptionally low DC leakage, dissipation
factor and impedance characteristics. These parts are available in
Style CSR33 per MIL–PRF–39003/06.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2066_T255 • 3/6/2015
1
Tantalum Through-Hole Capacitors – Hermetically Sealed
T255 Series Axial High Temperature Solder (CSR33 Style)
Ordering Information
T
Capacitor
Class
T=
Tantalum
255
A
125
M
S
C
Series
Case
Size
Capacitance Code
(pF)
Capacitance Rated Voltage
Tolerance
(VDC)
Failure Rate/Military
Product Only
Termination
Finish
Specification
A, B,
C, D
First two digits
represent significant
figures. Third digit
specifies number of
zeros to follow.
K = ±10%
M = ±20%
Graded:
B = 0.1%/k hours
C = 0.01%/k hours
D = 0.001%/k hours
G = 1.0%/k hours
Exponential:
M = 1%/k hours
P = 0.1%/k hours
R = 0.01%/k hours
S = 0.001%/k hours
S = Standard
Hermetically
Sealed
Axial High
Temperature
Solder
K
050
006 = 6
010 = 10
015 = 15
020 = 20
035 = 35
050 = 50
4251 = 10 cycles, -55 &
85°C after Weibull
4252 = 10 cycles, -55 &
85°C before Weibull
7200 = Tape & Reel 7293 & 7443 = Ammo
Ordering Information – T255 (CSR33 Style)
M39003
/06
4073
H
Capacitor Class
Slash
Dash Number
Surge Option
Military
Specification
Number
Specification
Sheet Number
Failure Rate
Level
E = C-4251
F = C-4252
H = Hi Temp
Solder Only
Orders should be entered by the military specification number, including the dash number and surge option letter (E, F or H).
Performance Characteristics
Item
Performance Characteristics
Operating Temperature
Rated Capacitance Range
Capacitance Tolerance
Rated Voltage Range
DF (120 Hz at 25°C)
ESR and Impedance (100 kHz at 25°C)
Leakage Current
Failure Rate (MIL–PRF–39003, CSR33
capacitors only)
-55°C to 125°C
1.2 –1,000 μF at 120 Hz/25°C
K Tolerance (10%), M Tolerance (20%)
6 – 50 V
Refer to Part Number Electrical Specification Table
Refer to Part Number Electrical Specification Table (for reference only)
Refer to Part Number Electrical Specification Table (at rated voltage up to +85°C and 2/3 of rated
voltage applied at 125°C)
Approved failure rate: Graded G (1.0%/k hours), B (0.1%/k hours), C (0.01%/k hours), D (0.001%/k
hours) and Exponential M (1.0%/k hours), P (0.1%/k hours), R (0.01%/k hours), S (0.001%/k hours)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2066_T255 • 3/6/2015
2
Tantalum Through-Hole Capacitors – Hermetically Sealed
T255 Series Axial High Temperature Solder (CSR33 Style)
Dimensions – Inches (Millimeters)
Case
Size
Uninsulated
Insulated
D ±0.005 L ±0.031 D ±0.010 L ±0.031 B ±0.002
C
±(.13)
±(.79)
±(.25)
±(.79)
±(.05) Maximum
A
0.125 (3.18)
B
0.175 (4.45) 0.438 (11.13) 0.185 (4.70) 0.474 (12.04) 0.020 (0.51) 0.610 (15.49)
C
0.279 (7.09) 0.650 (16.51) 0.289 (7.34) 0.686 (17.42) 0.025 (0.64) 0.822 (20.88)
D
0.341 (8.66) 0.750 (19.05) 0.351 (8.92) 0.786 (19.96) 0.025 (0.64) 0.922 (23.42)
0.250 (6.35) 0.135 (3.43)
0.286 (7.26)
0.020 (0.51) 0.422 (10.72)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2066_T255 • 3/6/2015
3
Tantalum Through-Hole Capacitors – Hermetically Sealed
T255 Series Axial High Temperature Solder (CSR33 Style)
Table 1 – Ratings & Part Number Reference
MIL–PRF–39003 (CSR33) Capacitors
Rated
Voltage
Rated
Capacitance
Case
Size
Code
Dash Number Reference
KEMET Part
Number
DC
Leakage
DF % at
25°C
(See below for
part options)
T255A106K006(1)S
T255A106M006(1)S
T255A126K006(1)S
T255B107K006(1)S
T255B107M006(1)S
T255C337K006(1)S
T255C337M006(1)S
T255C397K006(1)S
T255C477K006(1)S
T255C477M006(1)S
T255D687K006(1)S
T255D687M006(1)S
T255D827K006(1)S
T255D108K006(1)S
T255D108M006(1)S
T255A685K010(1)S
T255A685M010(1)S
T255A825K010(1)S
T255B476K010(1)S
T255B476M010(1)S
T255B566K010(1)S
T255B686K010(1)S
T255B686M010(1)S
T255B826K010(1)S
T255C227K010(1)S
T255C227M010(1)S
T255C277K010(1)S
T255D397K010(1)S
T255D477K010(1)S
T255D477M010(1)S
T255D567K010(1)S
T255A475K015(1)S
T255A475M015(1)S
T255A565K015(1)S
T255B336K015(1)S
T255B336M015(1)S
T255B396K015(1)S
T255C157K015(1)S
T255C157M015(1)S
T255C187K015(1)S
T255D227K015(1)S
T255D227M015(1)S
T255D277K015(1)S
T255D337K015(1)S
T255D337M015(1)S
T255A275K020(1)S
T255A335K020(1)S
T255A335M020(1)S
T255A395K020(1)S
T255B186K020(1)S
µA at 25°C
Max/5 Minutes
0.5
0.5
0.5
1.0
1.0
2.0
2.0
2.0
2.0
2.0
5.0
5.0
5.0
5.0
5.0
0.5
0.5
0.5
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.0
2.0
4.0
4.0
4.0
0.5
0.5
0.5
1.0
1.0
1.0
1.0
1.0
2.0
2.0
2.0
2.0
2.0
2.0
0.5
0.5
0.5
0.5
1.0
120 Hz
Maximum
6
6
6
8
8
8
8
10
10
10
10
10
10
10
10
6
6
6
6
6
6
6
6
6
8
8
8
10
10
10
10
4
4
4
6
6
6
8
8
8
8
8
8
8
8
4
4
4
4
6
M
(1.0)
00010002000300040005000600070008000900100011001200130014001500160017001800190020002100220023002400250026002700280029003000310032003300340035003600370038003900400041004200430044004500460047004800490050-
P
(0.1)
01010102010301040105010601070108010901100111011201130114011501160117011801190120012101220123012401250126012701280129013001310132013301340135013601370138013901400141014201430144014501460147014801490150-
R
(0.01)
02010202020302040205020602070208020902100211021202130214021502160217021802190220022102220223022402250226022702280229023002310232023302340235023602370238023902400241024202430244024502460247024802490250-
S
(0.001)
03010302030303040305030603070308030903100311031203130314031503160317031803190320032103220323032403250326032703280329033003310332033303340335033603370338033903400341034203430344034503460347034803490350-
G
(1)
50015002500350045005500650075008500950105011501250135014501550165017501850195020502150225023502450255026502750285029503050315032503350345035503650375038503950405041504250435044504550465047504850495050-
B
(0.1)
20012002200320042005200620072008200920102011201220132014201520162017201820192020202120222023202420252026202720282029203020312032203320342035203620372038203920402041204220432044204520462047204820492050-
C
(0.01)
30013002300330043005300630073008300930103011301230133014301530163017301830193020302130223023302430253026302730283029303030313032303330343035303630373038303930403041304230433044304530463047304830493050-
D
(0.001)
40014002400340044005400640074008400940104011401240134014401540164017401840194020402140224023402440254026402740284029403040314032403340344035403640374038403940404041404240434044404540464047404840494050-
(See below for
part options)
µA at 25°C
Max/5 Minutes
120 Hz
Maximum
M
(1.0)
P
(0.1)
R
(0.01)
S
(0.001)
G
(1)
B
(0.1)
C
(0.01)
D
(0.001)
KEMET Part
Number
DC
Leakage
DF % at
25°C
Failure Rate Level (%/1,000 hours)
MIL–PRF–39003/6F
MIL–PRF–39003/6F
Exponential
VDC
µF
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
15
15
15
15
15
15
15
15
15
15
15
15
15
15
20
20
20
20
20
10.0
10.0
12.0
100.0
100.0
330.0
330.0
390.0
470.0
470.0
680.0
680.0
820.0
1000.0
1000.0
6.8
6.8
8.2
47.0
47.0
56.0
68.0
68.0
82.0
220.0
220.0
270.0
390.0
470.0
470.0
560.0
4.7
4.7
5.6
33.0
33.0
39.0
150.0
150.0
180.0
220.0
220.0
270.0
330.0
330.0
2.7
3.3
3.3
3.9
18.0
A
A
A
B
B
C
C
C
C
C
D
D
D
D
D
A
A
A
B
B
B
B
B
B
C
C
C
D
D
D
D
A
A
A
B
B
B
C
C
C
D
D
D
D
D
A
A
A
A
B
VDC
µF
Rated
Voltage
Rated
Capacitance
Case
Size
Code
Graded
MIL–PRF–39003 (CSR33) Capacitors
(1) To complete KEMET Part Number (T255), insert Graded failure rate: G for 1%/k hours, B for .1%/k hours, C for .01%/k hours, D for .001%/k hours or the
exponential rate letter. Designates Reliability Level.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2066_T255 • 3/6/2015
4
Tantalum Through-Hole Capacitors – Hermetically Sealed
T255 Series Axial High Temperature Solder (CSR33 Style)
Table 1 – Ratings & Part Number Reference cont'd
MIL–PRF–39003 (CSR33) Capacitors
Rated
Voltage
Rated
Capacitance
Case
Size
Code
KEMET Part
Number
DC
Leakage
DF % at
25°C
(See below for
part options)
T255B226K020(1)S
T255B226M020(1)S
T255B276K020(1)S
T255C556K020(1)S
T255C686K020(1)S
T255C686M020(1)S
T255C826K020(1)S
T255C107K020(1)S
T255107M020(1)S
T255C127K020(1)S
T255D157K020(1)S
T255D157M020(1)S
T255D187K020(1)S
T255A185K035(1)S
T255B825K035(1)S
T255B106K035(1)S
T255B106M035(1)S
T255C336K035(1)S
T255C336M035(1)S
T255C396K035(1)S
T255C476K035(1)S
T255C476M035(1)S
T255D566K035(1)S
T255D686K035(1)S
T255D686M035(1)S
T255A125K050(1)S
T255A155K050(1)S
T255A155M050(1)S
T255B565K050(1)S
T255B685K050(1)S
T255B685M050(1)S
T255C226K050(1)S
T255C226M050(1)S
T255C276K050(1)S
T255D336K050(1)S
T255D336M050(1)S
T255D396K050(1)S
(See below for
part options)
µA at 25°C
Max/5 Minutes
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.0
2.0
2.0
0.5
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.0
2.0
2.0
0.5
0.5
0.5
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
µA at 25°C
Max/5 Minutes
120 Hz
Maximum
6
6
6
6
6
6
6
6
6
6
8
8
8
4
6
6
6
6
6
6
6
6
6
6
6
4
4
4
4
6
6
6
6
6
6
6
6
120 Hz
Maximum
KEMET Part
Number
DC
Leakage
DF % at
25°C
Dash Number Reference
Failure Rate Level (%/1,000 hours)
MIL–PRF–39003/6F
MIL–PRF–39003/6F
Exponential
VDC
µF
20
20
20
20
20
20
20
20
20
20
20
20
20
35
35
35
35
35
35
35
35
35
35
35
35
50
50
50
50
50
50
50
50
50
50
50
50
22.0
22.0
27.0
56.0
68.0
68.0
82.0
100.0
100.0
120.0
150.0
150.0
180.0
1.8
8.2
10.0
10.0
33.0
33.0
39.0
47.0
47.0
56.0
68.0
68.0
1.2
1.5
1.5
5.6
6.8
6.8
22.0
22.0
27.0
33.0
33.0
39.0
B
B
B
C
C
C
C
C
C
C
D
D
D
A
B
B
B
C
C
C
C
C
D
D
D
A
A
A
B
B
B
C
C
C
D
D
D
VDC
µF
Rated
Voltage
Rated
Capacitance
Case
Size
Code
M
(1.0)
0051005200530054005500560057005800590060006100620063006400650066006700680069007000710072007300740075007600770078007900800081008200830084008500860087M
(1.0)
P
(0.1)
0151015201530154015501560157015801590160016101620163016401650166016701680169017001710172017301740175017601770178017901800181018201830184018501860187P
(0.1)
R
(0.01)
0251025202530254025502560257025802590260026102620263026402650266026702680269027002710272027302740275027602770278027902800281028202830284028502860287R
(0.01)
Graded
S
(0.001)
0351035203530354035503560357035803590360036103620363036403650366036703680369037003710372037303740375037603770378037903800381038203830384038503860387S
(0.001)
G
(1)
5051505250535054505550565057505850595060506150625063506450655066506750685069507050715072507350745075507650775078507950805081508250835084508550865087G
(1)
B
(0.1)
2051205220532054205520562057205820592060206120622063206420652066206720682069207020712072207320742075207620772078207920802081208220832084208520862087B
(0.1)
C
(0.01)
3051305230533054305530563057305830593060306130623063306430653066306730683069307030713072307330743075307630773078307930803081308230833084*
*
*
C
(0.01)
D
(0.001)
4051405240534054405540564057405840594060406140624063406440654066406740684069407040714072407340744075407640774078407940804081408240834084*
*
*
D
(0.001)
MIL–PRF–39003 (CSR33) Capacitors
(1) To complete KEMET Part Number (T255), insert Graded failure rate: G for 1%/k hours, B for .1%/k hours, C for .01%/k hours, D for .001%/k hours or the
exponential rate letter. Designates Reliability Level.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2066_T255 • 3/6/2015
5
Tantalum Through-Hole Capacitors – Hermetically Sealed
T255 Series Axial High Temperature Solder (CSR33 Style)
Ripple Current/Ripple Voltage
Permissible AC ripple voltage is related to the ESR of the capacitor and the power dissipation capabilities of a particular case size.
Thermal capacities for the various case sizes have been determined empirically and are listed below.
Temperature Compensation Multipliers
for Maximum Power Dissipation
T ≤ 25°C
1.00
T ≤ 85°C
0.90
T ≤ 125°C
0.40
T= Environmental Temperature
Permissible AC ripple current can be determined by the following:
I(max) = Z √P max/R
Case Size
Maximum Power
Dissipation (P max)
T2XX
A
0.09
0.070
B
0.100
0.090
C
0.125
–
D
0.180
–
Maximum Power Dissipation: 25°C Ambient
P max = maximum watts
R = ESR at specified frequency (ohms)
I = rms ripple current (amperes)
Z = capacitor impedance in ohms at the specified frequency
Optimum Solder Wave Profile
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2066_T255 • 3/6/2015
6
Tantalum Through-Hole Capacitors – Hermetically Sealed
T255 Series Axial High Temperature Solder (CSR33 Style)
Mounting
All encased capacitors will pass the Resistance to Soldering Heat Test of MIL–STD–202, Method 210, Condition C. This test simulates
wave solder of topside board mount product. This demonstration of resistance to solder heat is in accordance with what is believed to
be the industry standard. More severe treatment must be considered reflective of an improper soldering process. The above figure is a
recommended solder wave profile for both axial and radial leaded solid tantalum capacitors.
Capacitor Marking
Case B
Case A
Military Specification
Number
39003
06 - K
6003H J
316 +
AAAA
Specification Sheet
Number & K = KEMET
Military Dash Number
& J = January
Date Code &
Polarity
Lot Symbol
M39003
06
6003H J
31433
316 AAAA +
Military Specification
Number
Specification Sheet
Number
Military Dash Number
& J = January
Source Code
Date Code ,
Polarity & Lot
Symbol
Case C & D
M39003
06 -2014H J
1000µF +
31433
316 AAAA K
Military Specification
Number
Specification Sheet Number , Military
Dash Number and J= January
Capacitance Value &
Polarity
Source Code
Date Code ,
Lot Symbol &
K = KEMET
Date Code
1 digit = Last number of Year
2 = 2012
3 = 2013
4 = 2014
2nd and 3rd digit = Week of the Year
11 = 2nd week of March
st
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2066_T255 • 3/6/2015
7
Tantalum Through-Hole Capacitors – Hermetically Sealed
T255 Series Axial High Temperature Solder (CSR33 Style)
Storage
Tantalum hermetically sealed capacitors should be stored in normal working environments. While the capacitors themselves are quite
robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres,
and long term storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel
force may increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not
exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres
should be free of chlorine and sulphur bearing compounds. For optimized solderability capacitors stock should be used promptly,
preferably within three years of receipt.
Tape & Reel Packaging Information
KEMET offers standard reeling of Solid Tantalum Capacitors for automatic insertion or lead forming machines per EIA Specification
RS-296E.
Table 2 – Packaging Quantity
Case Size
Standard Bulk
Quantity
Standard Reel
Quantity
Reel C-Spec
Ammo Pack
Quantity
Ammo Pack
C-Spec
A
150/Box
3,500
C-7200
1,500
C-7293
B
75/Box
2,500
C-7200
1,000
Class I
C
20/Tray
500
C-7200
250
C-7442
D
20/Tray
400
C-7200
250
Class II
C-7443
Class III
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2066_T255 • 3/6/2015
8
Tantalum Through-Hole Capacitors – Hermetically Sealed
T255 Series Axial High Temperature Solder (CSR33 Style)
Figure 2
Figure 3
12"
(30.48cm)
*
0.059" to 0.315"
Greater Than
Component
Length
White (+)
(Anode)
Blue ( –)
(Cathode)
0.047" Maximum
(1.20)
Hub
0.655" ±0.010
Hole
(15.9 ±0.25)
*
3 1 /4 "
(82.6)
1/ "
8
(3.18)
See Table 3
"B"
See Table 3
"A"
0.250" Nominal
(6.35)
Table 3 – Tape Dimensions
Component Body Diameter
Component
Pitch "A"
Inside Tape Spacing "B" ±1.5 mm (0.059")
0.020" or (±0.5 mm)
I
II
III
0" (0 mm) to 0.197" (5 mm)
0.200" or (5 mm)
2.062"
2.500"
2.874"
0.197" (5.01 mm) to 0.394" (10 mm)
0.400 or (10 mm)
(52.4 mm)
(63.5 mm)
(73 mm)
Capacitors are reeled so that positive leads are oriented as shown in Figure 3. Kraft paper (50lb. test minimum) is inserted between
thelayersofcapacitorswoundonreelsforcomponentpitch≤0.200"sizesandcorrugatedpaper(70lb.testminimum),singlefacedis
insertedforcomponentpitch≥0.400"sizes.Capacitorleadlengthmayextendonlyamaximumof.031"(0.8mm)beyondthetape’s
edges.Capacitorsarecenteredinarowbetweenthetwotapesandwilldeviateonly±0.031"(0.79mm)fromtherowcenter.Figures
1 and 2 show the KEMET standard chipboard tape reel. A minimum of 36" (91.5 cm) leader tape is provided at each end of the reeled
capacitors. Universal splicing clips are used to connect the tape.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2066_T255 • 3/6/2015
9
Tantalum Through-Hole Capacitors – Hermetically Sealed
T255 Series Axial High Temperature Solder (CSR33 Style)
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
SassoMarconi,Italy
Tel: 39-051-939111
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Skopje, Macedonia
Tel: 389-2-55-14-623
Shenzhen, China
Tel: 86-755-2518-1306
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Central Europe
Landsberg,Germany
Tel: 49-8191-3350800
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Kamen,Germany
Tel: 49-2307-438110
North America
Northern Europe
Harlow, United Kingdom
Tel: 44-1279-460122
Taipei, Taiwan
Tel: 886-2-27528585
Espoo, Finland
Tel: 358-9-5406-5000
Southeast Asia
Singapore
Tel: 65-6701-8033
2835KEMETWay
Simpsonville, SC 29681
Southeast
LakeMary,FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
Central
Novi, MI
Tel: 248-306-9353
Beijing, China
Tel: 86-10-5877-1075
Shanghai, China
Tel: 86-21-6447-0707
Seoul, South Korea
Tel: 82-2-6294-0550
Penang,Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2066_T255 • 3/6/2015
10
Tantalum Through-Hole Capacitors – Hermetically Sealed
T255 Series Axial High Temperature Solder (CSR33 Style)
Disclaimer
Allproductspecifications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand
verifyingtheextenttowhichtheInformationcontainedinthispublicationisapplicabletoanorderatthetimetheorderisplaced.
AllInformationgivenhereinisbelievedtobeaccurateandreliable,butitispresentedwithoutguarantee,warranty,orresponsibilityofanykind,expressedorimplied.
StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuchapplications,butare
notintendedtoconstitute–andKEMETspecificallydisclaims–anywarrantyconcerningsuitabilityforaspecificcustomerapplicationoruse.TheInformationisintendedforuseonly
bycustomerswhohavetherequisiteexperienceandcapabilitytodeterminethecorrectproductsfortheirapplication.AnytechnicaladviceinferredfromthisInformationorotherwise
providedbyKEMETwithreferencetotheuseofKEMET’sproductsisgivengratis,andKEMETassumesnoobligationorliabilityfortheadvicegivenorresultsobtained.
AlthoughKEMETdesignsandmanufacturesitsproductstothemoststringentqualityandsafetystandards,giventhecurrentstateoftheart,isolatedcomponentfailuresmaystill
occur.Accordingly,customerapplicationswhichrequireahighdegreeofreliabilityorsafetyshouldemploysuitabledesignsorothersafeguards(suchasinstallationofprotective
circuitryorredundancies)inordertoensurethatthefailureofanelectricalcomponentdoesnotresultinariskofpersonalinjuryorpropertydamage.
Althoughallproduct–relatedwarnings,cautionsandnotesmustbeobserved,thecustomershouldnotassumethatallsafetymeasuresareindictedorthatothermeasuresmaynot
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2066_T255 • 3/6/2015
11