Tantalum Through-Hole Capacitors – Hermetically Sealed T262 Series Axial MIL–PRF–39003 (CSR21 Style) Overview KEMET’s T262 Series (CSR21 Style) hermetically sealed solid tantalum capacitors are qualified to MIL–C–39003/09. This series is similar to KEMET's popular T212 (CSR13 per MIL–PRF–39003/01) capacitors, but offer higher ripple current handling capability and exhibit exceptionally low equivalent series resistance (ESR). The T262 Series is ideal for filtering applications and in military power supplies where low ESR is essential. These capacitors are 100% surge current tested and their dissipation factor is screened at 1 kHz. Benefits Applications • • • • The T262 Series is ideal for filtering applications and in defense power supplies where low ESR is essential. • • • • • • • Taped and reeled per EIA Specification RS–296 Marking per MIL–STD–1285 Qualified to MIL–PRF–39003 (CSR21 Style) Failure rate options: Graded - B, C, D, and G Exponential - M, P, R, and S* Capacitance values of 5.6 μF to 330 μF Tolerances of ±5%, ±10%, and ±20% Voltage rating of 6 – 50 VDC Operating temperature range of -55˚C to +125˚C 100% surge current test available on all case sizes Dissipation factor is screened at 1 kHz Case sizes: C, D *Failure rates apply to military products only One world. One KEMET © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2036_T262_AXIAL • 3/6/2015 1 Tantalum Through-Hole Capacitors – Hermetically Sealed T262 Series Axial MIL–PRF–39003 (CSR21 Style) Ordering Information T 262 C 106 K 050 C C Series Case Size Capacitance Code (pF) Capacitance Tolerance Rated Voltage (VDC) Failure Rate Termination Finish Hermetically Sealed Axial Capacitor C, D First two digits represent significant figures. Third digit specifies number of zeros. J = ±5% K = ±10% M = ±20% 006 = 6 010 = 10 015 = 15 020 = 20 035 = 35 050 = 50 Capacitor Class T= Tantalum Graded: B = 0.1%/k hours C = 0.01%/k hours D = 0.001%/k hours Exponential: M = 1%/k hours P = 0.1%/k hours R = 0.01%/k hours S = 0.001%/k hours All capacitors are sleeved unless specified. 0100 = Without sleeve 7200 = Tape & Reel 7293 & 7443 = Ammo 4251 = 10 cycles, -55 & 85°C after Weibull 4252 = 10 cycles, -55 & 85°C before Weibull Ordering Information – T262 (CSR21 Style) MIL product M39003 /09 3074 B Capacitor Class Slash Dash Number Surge Option Military Specification Number Specification Sheet Number Failure Rate Level B = C-4251 C = C-4252 Orders should be entered by the military specification number, including the dash number and surge option letter (B, or C). Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range DF (120 Hz at 25°C) ESR and Impedance (100 kHz at 25°C) Leakage Current Failure Rate (MIL–39003, CSR13 capacitors only) -55°C to 125°C 5.6 – 330 μF at 120 Hz/25°C J Tolerance (5%), K Tolerance (10%), M Tolerance (20%) 6 – 50 V Refer to Part Number Electrical Specification Table Refer to Part Number Electrical Specification Table Refer to Part Number Electrical Specification Table (at rated voltage up to +85°C and 2/3 of rated voltage applied at 125°C) Approved failure rate: S (0.001%/k hours) - Exponential, D (0.001%/k hours) - Graded © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2036_T262_AXIAL • 3/6/2015 2 Tantalum Through-Hole Capacitors – Hermetically Sealed T262 Series Axial MIL–PRF–39003 (CSR21 Style) Dimensions – Inches (Millimeters) Case Size C D Uninsulated Insulated D ±0.005 L ±0.031 D ±0.010 L ±0.031 B ±0.002 C ±(.13) ±(.79) ±(.25) ±(.79) ±(.05) Maximum 0.279 (7.09) 0.341 (8.66) 0.650 (16.51) 0.750 (19.05) 0.289 (7.34) 0.351 (8.92) 0.686 (17.42) 0.786 (19.96) 0.025 (.64) 0.025 (.64) 0.822 (20.88) 0.922 (23.42) © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2036_T262_AXIAL • 3/6/2015 3 Tantalum Through-Hole Capacitors – Hermetically Sealed T262 Series Axial MIL–PRF–39003 (CSR21 Style) Table 1 – Ratings & Part Number Reference MIL–PRF–39003/09 (CSR21) Capacitors Rated Voltage Rated Cap Case DC Size Leakage Code DF ESR Ripple Current Dash Number Reference Failure Rate Level (%/1,000 Hours) MIL–PRF–39003/9D MIL–PRF–39003/9D Exponential VDC µF 6 6 6 6 6 6 6 6 6 6 10 10 10 10 10 10 10 10 10 10 10 10 15 15 15 15 15 15 15 15 15 15 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 150.0 150.0 150.0 180.0 180.0 270.0 270.0 330.0 330.0 330.0 82.0 82.0 100.0 100.0 100.0 120.0 120.0 180.0 180.0 220.0 220.0 220.0 56.0 56.0 68.0 68.0 68.0 120.0 120.0 150.0 150.0 150.0 27.0 27.0 33.0 33.0 33.0 39.0 39.0 47.0 47.0 47.0 56.0 56.0 68.0 68.0 68.0 C C C C C D D D D D C C C C C C C D D D D D C C C C C D D D D D C C C C C C C C C C D D D D D VDC µF Rated Voltage Rated Cap Case Size Code Graded KEMET Equivalent Military µA at 25°C Max/5 Min 4.5 4.5 4.5 5.5 5.5 6.5 6.5 7.5 7.5 7.5 4.0 4.0 5.0 5.0 5.0 6.0 6.0 9.0 9.0 10.0 10.0 10.0 4.0 4.0 5.0 5.0 5.0 9.0 9.0 10.0 10.0 10.0 2.5 2.5 3.5 3.5 3.5 4.0 4.0 4.5 4.5 4.5 5.5 5.5 7.0 7.0 7.0 % at 25°C Ω at25°C Arms at 25°C 120 Hz Max 100 kHz Max 40 kHz Max 10 0.065 3.3 10 0.065 3.3 10 0.065 3.3 10 0.060 3.4 10 0.060 3.4 10 0.050 4.1 10 0.050 4.1 12 0.045 4.3 12 0.045 4.3 12 0.045 4.3 8 0.085 2.9 8 0.085 2.9 8 0.075 3.0 8 0.075 3.0 8 0.075 3.0 8 0.070 3.2 8 0.070 3.2 8 0.060 3.7 8 0.060 3.7 10 0.055 3.9 10 0.055 3.9 10 0.055 3.9 6 0.100 2.6 6 0.100 2.6 6 0.095 2.7 6 0.095 2.7 6 0.095 2.7 8 0.070 3.5 8 0.070 3.5 8 0.065 3.6 8 0.065 3.6 8 0.065 3.6 5 0.145 2.2 5 0.145 2.2 5 0.130 2.3 5 0.130 2.3 5 0.130 2.3 5 0.120 2.4 5 0.120 2.4 6 0.110 2.5 6 0.110 2.5 6 0.110 2.5 6 0.100 2.9 6 0.100 2.9 6 0.095 3.0 6 0.095 3.0 6 0.095 3.0 M (1.0) 0001 0002 0003 0004 0005 0006 0007 0008 0009 0010 0011 0012 0013 0014 0015 0016 0017 0018 0019 0020 0021 0022 0023 0024 0025 0026 0027 0028 0029 0030 0031 0032 0033 0034 0035 0036 0037 0038 0039 0040 0041 0042 0043 0044 0045 0046 0047 P (0.1) 0101 0102 0103 0104 0105 0106 0107 0108 0109 0110 0111 0112 0113 0114 0115 0116 0117 0118 0119 0120 0121 0122 0123 0124 0125 0126 0127 0128 0129 0130 0131 0132 0133 0134 0135 0136 0137 0138 0139 0140 0141 0142 0143 0144 0145 0146 0147 R S (0.01) (0.001) 0201 0301 0202 0302 0203 0303 0204 0304 0205 0305 0206 0306 0207 0307 0208 0308 0209 0309 0210 0310 0211 0311 0212 0312 0213 0313 0214 0314 0215 0315 0216 0316 0217 0317 0218 0318 0219 0319 0220 0320 0221 0321 0222 0322 0223 0323 0224 0324 0225 0325 0226 0326 0227 0327 0228 0328 0229 0329 0230 0330 0231 0331 0232 0332 0233 0333 0234 0334 0235 0335 0236 0336 0237 0337 0238 0338 0239 0339 0240 0340 0241 0341 0242 0342 0243 0343 0244 0344 0245 0345 0246 0346 0247 0347 G (1) 5001 5002 5003 5004 5005 5006 5007 5008 5009 5010 5011 5012 5013 5014 5015 5016 5017 5018 5019 5020 5021 5022 5023 5024 5025 5026 5027 5028 5029 5030 5031 5032 5033 5034 5035 5036 5037 5038 5039 5040 5041 5042 5043 5044 5045 5046 5047 B (0.1) 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 C D (0.01) (0.001) 3001 4001 3002 4002 3003 4003 3004 4004 3005 4005 3006 4006 3007 4007 3008 4008 3009 4009 3010 4010 3011 4011 3012 4012 3013 4013 3014 4014 3015 4015 3016 4016 3017 4017 3018 4018 3019 4019 3020 4020 3021 4021 3022 4022 3023 4023 3024 4024 3025 4025 3026 4026 3027 4027 3028 4028 3029 4029 3030 4030 3031 4031 3032 4032 3033 4033 3034 4034 3035 4035 3036 4036 3037 4037 3038 4038 3039 4039 3040 4040 3041 4041 3042 4042 3043 4043 3044 4044 3045 4045 3046 4046 3047 4047 T262C157J006(1)S T262C157K006(1)S T262C157M006(1)S T262C187J006(1)S T262C187K006(1)S T262D277J006(1)S T262D277K006(1)S T262D337J006(1)S T262D337K006(1)S T262D337M006(1)S T262C826J010(1)S T262C826K010(1)S T262C107J010(1)S T262C107K010(1)S T262C107M010(1)S T262C127J010(1)S T262C127K010(1)S T262D187J010(1)S T262D187K010(1)S T262D227J010(1)S T262D227K010(1)S T262D227M010(1)S T262C566J015(1)S T262C566K015(1)S T262C686J015(1)S T262C686K015(1)S T262C686M015(1)S T262D127J015(1)S T262D127K015(1)S T262D157J015(1)S T262D157K015(1)S T262D157M015(1)S T262C276J020(1)S T262C276K020(1)S T262C336J020(1)S T262C336K020(1)S T262C336M020(1)S T262C396J020(1)S T262C396K020(1)S T262C476J020(1)S T262C476K020(1)S T262C476M020(1)S T262D566J020(1)S T262D566K020(1)S T262D686J020(1)S T262D686K020(1)S T262D686M020(1)S µA at 25°C Max/5 Min % at 25°C Ω at25°C Arms at 25°C 120 Hz Max 100 kHz Max 40 kHz Max M (1.0) P (0.1) R S (0.01) (0.001) G (1) B (0.1) C D (0.01) (0.001) Part Number DC Leakage DF ESR Ripple Current Part Number MIL–PRF–39003/09 (CSR21) Capacitors (1) To complete KEMET Part Number (T262), insert Graded failure rate - A for Not Applicable, B for 0.1%/k hours, C for 0.01%/k hours , D for 0.001%/k hours or G for 1%/k hours. Designates Reliability Level. (2) To complete KEMET Part Number (T262), insert Exponential failure rate - M for 1%/k hours, P for .1%/k hours, R for .01%/k hours, or S for .001%/k hours. Designates reliability level. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2036_T262_AXIAL • 3/6/2015 4 Tantalum Through-Hole Capacitors – Hermetically Sealed T262 Series Axial MIL–PRF–39003 (CSR21 Style) Table 1 – Ratings & Part Number Reference cont'd MIL–PRF–39003/09 (CSR21) Capacitors Rated Voltage Rated Cap Case DC Size Leakage Code DF ESR Ripple Current Dash Number Reference Failure Rate Level (%/1,000 Hours) MIL–PRF–39003/9D MIL–PRF–39003/9D Exponential VDC µF 20 20 20 20 20 35 35 35 35 35 35 35 35 35 35 35 35 35 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 82.0 82.0 100.0 100.0 100.0 22.0 22.0 22.0 27.0 27.0 33.0 33.0 33.0 39.0 39.0 47.0 47.0 47.0 5.6 5.6 6.8 6.8 6.8 8.2 8.2 10.0 10.0 10.0 12.0 12.0 15.0 15.0 15.0 18.0 18.0 22.0 22.0 22.0 D D D D D C C C D D D D D D D D D D C C C C C C C C C C C C C C C C C D D D VDC µF Rated Voltage Rated Cap Case Size Code µA at 25°C Max/5 Min 8.0 8.0 10.0 10.0 10.0 4.0 4.0 4.0 4.5 4.5 5.5 5.5 5.5 7.0 7.0 8.0 8.0 8.0 2.2 2.2 2.2 2.2 2.2 2.5 2.5 2.5 2.5 2.5 3.0 3.0 4.0 4.0 4.0 4.5 4.5 5.5 5.5 5.5 % at 25°C Ω at25°C Arms at 25°C 120 Hz Max 100 kHz Max 40 kHz Max 6 0.085 3.1 6 0.085 3.1 8 0.075 3.3 8 0.075 3.3 8 0.075 3.3 4 0.160 2.1 4 0.160 2.1 4 0.160 2.1 4 0.145 2.4 4 0.145 2.4 5 0.130 2.5 5 0.130 2.5 5 0.130 2.5 5 0.120 2.6 5 0.120 2.6 5 0.110 2.7 5 0.110 2.7 5 0.110 2.7 3 0.300 1.5 3 0.300 1.5 3 0.275 1.6 3 0.275 1.6 3 0.275 1.6 3 0.250 1.6 3 0.250 1.6 3 0.230 1.7 3 0.230 1.7 3 0.230 1.7 3 0.210 1.8 3 0.210 1.8 3 0.190 1.9 3 0.190 1.9 3 0.190 1.9 4 0.175 2.0 4 0.175 2.0 4 0.160 2.3 4 0.160 2.3 4 0.160 2.3 µA at 25°C Max/5 Min % at 25°C Ω at25°C Arms at 25°C 120 Hz Max 100 kHz Max 40 kHz Max DC Leakage DF ESR Ripple Current M (1.0) 0048 0049 0050 0051 0052 0053 0054 0055 0056 0057 0058 0059 0060 0061 0062 0063 0064 0065 0066 0067 0068 0069 0070 0071 0072 0073 0074 0075 0076 0077 0078 0079 0080 0081 0082 0083 0084 0085 M (1.0) P (0.1) 0148 0149 0150 0151 0152 0153 0154 0155 0156 0157 0158 0159 0160 0161 0162 0163 0164 0165 0166 0167 0168 0169 0170 0171 0172 0173 0174 0175 0176 0177 0178 0179 0180 0181 0182 0183 0184 0185 P (0.1) R S (0.01) (0.001) 0248 0348 0249 0349 0250 0350 0251 0351 0252 0352 0253 0353 0254 0354 0255 0355 0256 0356 0257 0357 0258 0358 0259 0359 0260 0360 0261 0361 0262 0362 0263 0363 0264 0364 0265 0365 0266 0366 0267 0367 0268 0368 0269 0369 0270 0370 0271 0371 0272 0372 0273 0373 0274 0374 0275 0375 0276 0376 0277 0377 0278 0378 0279 0379 0280 0380 0281 0381 0282 0382 0283 0383 0284 0384 0285 0385 R S (0.01) (0.001) Graded G (1) 5048 5049 5050 5051 5052 5053 5054 5055 5056 5057 5058 5059 5060 5061 5062 5063 5064 5065 5066 5067 5068 5069 5070 5071 5072 5073 5074 5075 5076 5077 5078 5079 5080 5081 5082 5083 5084 5085 G (1) B (0.1) 2048 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066 2067 2068 2069 2070 2071 2072 2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 B (0.1) C D (0.01) (0.001) 3048 4048 3049 4049 3050 4050 3051 4051 3052 4052 3053 4053 3054 4054 3055 4055 3056 4056 3057 4057 3058 4058 3059 4059 3060 4060 3061 4061 3062 4062 3063 4063 3064 4064 3065 4065 3066 4066 3067 4067 3068 4068 3069 4069 3070 4070 3071 4071 3072 4072 3073 4073 3074 4074 3075 4075 3076 4076 3077 4077 3078 4078 3079 4079 3080 4080 3081 4081 3082 4082 3083 4083 3084 4084 3085 4085 C D (0.01) (0.001) KEMET Equivalent Military Part Number T262D826J020(1)S T262D826K020(1)S T262D107J020(1)S T262D107K020(1)S T262D107M020(1)S T262C226J035(1)S T262C226K035(1)S T262C226M035(1)S T262D276J035(1)S T262D276K035(1)S T262D336J035(1)S T262D336K035(1)S T262D336M035(1)S T262D396J035(1)S T262D396K035(1)S T262D476J035(1)S T262D476K035(1)S T262D476M035(1)S T262C565J050(1)S T262C565K050(1)S T262C685J050(1)S T262C685K050(1)S T262C685M050(1)S T262C825J050(1)S T262C825K050(1)S T262C106J050(1)S T262C106K050(1)S T262C106M050(1)S T262C126J050(1)S T262C126K050(1)S T262C156J050(1)S T262C156K050(1)S T262C156M050(1)S T262C186J050(1)S T262C186K050(1)S T262D226J050(1)S T262D226K050(1)S T262D226M050(1)S Part Number MIL–PRF–39003/09 (CSR21) Capacitors (1) To complete KEMET Part Number (T262), insert Graded failure rate - A for Not Applicable, B for 0.1%/k hours, C for 0.01%/k hours , D for 0.001%/k hours or G for 1%/k hours. Designates Reliability Level. (2) To complete KEMET Part Number (T262), insert Exponential failure rate - M for 1%/k hours, P for .1%/k hours, R for .01%/k hours, or S for .001%/k hours. Designates reliability level. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2036_T262_AXIAL • 3/6/2015 5 Tantalum Through-Hole Capacitors – Hermetically Sealed T262 Series Axial MIL–PRF–39003 (CSR21 Style) Ripple Current/Ripple Voltage Permissible AC ripple voltage is related to the ESR of the capacitor and the power dissipation capabilities of a particular case size. Thermal capacities for the various case sizes have been determined empirically and are listed below. Temperature Compensation Multipliers for Maximum Power Dissipation T ≤ 25°C 1.00 T ≤ 85°C 0.90 T ≤ 125°C 0.40 T= Environmental Temperature Permissible AC ripple current can be determined by the following: I(max) = Z √P max/R Case Size Maximum Power Dissipation (P max) T2XX A 0.09 0.070 B 0.100 0.090 C 0.125 – D 0.180 – Maximum Power Dissipation: 25°C Ambient P max = maximum watts R = ESR at specified frequency (ohms) I = rms ripple current (amperes) Z = capacitor impedance in ohms at the specified frequency Optimum Solder Wave Profile © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2036_T262_AXIAL • 3/6/2015 6 Tantalum Through-Hole Capacitors – Hermetically Sealed T262 Series Axial MIL–PRF–39003 (CSR21 Style) Reverse Voltage Although these are polar capacitors, some degree of transient voltage reversal is permissible, as seen below. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Pecentage of Rated Voltage +25°C +85°C +125°C 15 5 1 Mounting All encased capacitors will pass the Resistance to Soldering Heat Test of MIL–STD–202, Method 210, Condition C. This test simulates wave solder of topside board mount product. This demonstration of resistance to solder heat is in accordance with what is believed to be the industry standard. More severe treatment must be considered reflective of an improper soldering process. The above figure is a recommended solder wave profile for both axial and radial leaded solid tantalum capacitors. Capacitor Marking T262 Case C & D Military Specification Number M39003 09 - 3074J 10µF + 31433 330 AAAA K Specification Sheet Number, Military Dash Number and J= Jan Capacitance Value & Polarity Source Code Date Code, Lot Symbol & K = KEMET Date Code * 1st digit = Last number of Year 2 = 2012 3 = 2013 4 = 2014 2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to 52 = 52nd week of the Year © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2036_T262_AXIAL • 3/6/2015 7 Tantalum Through-Hole Capacitors – Hermetically Sealed T262 Series Axial MIL–PRF–39003 (CSR21 Style) Storage Tantalum hermetically sealed capacitors should be stored in normal working environments. While the capacitors themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability capacitors stock should be used promptly, preferably within three years of receipt. Tape & Reel Packaging Information KEMET offers standard reeling of Solid Tantalum Capacitors for automatic insertion or lead forming machines per EIA Specification RS-296E. Table 2 – Packaging Quantity Case Size Standard Bulk Quantity Standard Reel Quantity Reel C-Spec Ammo Pack Quantity Ammo Pack C-Spec A 150/Box 3,500 C-7200 1,500 C-7293 B 75/Box 2,500 C-7200 1,000 Class I C 20/Tray 500 C-7200 250 C-7442 D 20/Tray 400 C-7200 250 Class II C-7443 Class III © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2036_T262_AXIAL • 3/6/2015 8 Tantalum Through-Hole Capacitors – Hermetically Sealed T262 Series Axial MIL–PRF–39003 (CSR21 Style) Figure 2 Figure 3 12" (30.48cm) * 0.059" to 0.315" Greater Than Component Length White (+) (Anode) Blue ( –) (Cathode) 0.047" Maximum (1.20) Hub 0.655" ±0.010 Hole (15.9 ±0.25) * 3 1 /4 " (82.6) 1/ " 8 (3.18) See Table 3 "B" See Table 3 "A" 0.250" Nominal (6.35) Table 3 – Tape Dimensions Component Body Diameter Component Pitch "A" Inside Tape Spacing "B" ±1.5 mm (0.059") 0.020" or (±0.5 mm) I II III 0" (0 mm) to 0.197" (5 mm) 0.200" or (5 mm) 2.062" 2.500" 2.874" 0.197" (5.01 mm) to 0.394" (10 mm) 0.400 or (10 mm) (52.4 mm) (63.5 mm) (73 mm) CapacitorsarereeledsothatpositiveleadsareorientedasshowninFigure3.Kraftpaper(50lb.testminimum)isinsertedbetween thelayersofcapacitorswoundonreelsforcomponentpitch≤0.200"sizesandcorrugatedpaper(70lb.testminimum),singlefacedis insertedforcomponentpitch≥0.400"sizes.Capacitorleadlengthmayextendonlyamaximumof.031"(0.8mm)beyondthetape’s edges.Capacitorsarecenteredinarowbetweenthetwotapesandwilldeviateonly±0.031"(0.79mm)fromtherowcenter.Figures 1 and 2 show the KEMET standard chipboard tape reel. A minimum of 36" (91.5 cm) leader tape is provided at each end of the reeled capacitors. Universal splicing clips are used to connect the tape. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2036_T262_AXIAL • 3/6/2015 9 Tantalum Through-Hole Capacitors – Hermetically Sealed T262 Series Axial MIL–PRF–39003 (CSR21 Style) KEMET Corporation World Headquarters Europe Asia Southern Europe SassoMarconi,Italy Tel:39-051-939111 Northeast Asia HongKong Tel:852-2305-1168 MailingAddress: P.O. Box 5928 Greenville, SC 29606 Skopje, Macedonia Tel:389-2-55-14-623 Shenzhen, China Tel:86-755-2518-1306 www.kemet.com Tel:864-963-6300 Fax:864-963-6521 Central Europe Landsberg,Germany Tel:49-8191-3350800 Corporate Offices FortLauderdale,FL Tel:954-766-2800 Kamen,Germany Tel:49-2307-438110 North America Northern Europe Harlow,UnitedKingdom Tel:44-1279-460122 Taipei, Taiwan Tel:886-2-27528585 Espoo,Finland Tel:358-9-5406-5000 Southeast Asia Singapore Tel:65-6701-8033 2835KEMETWay Simpsonville, SC 29681 Southeast LakeMary,FL Tel:407-855-8886 Northeast Wilmington, MA Tel:978-658-1663 Central Novi,MI Tel:248-306-9353 Beijing, China Tel:86-10-5877-1075 Shanghai, China Tel:86-21-6447-0707 Seoul, South Korea Tel:82-2-6294-0550 Penang,Malaysia Tel:60-4-6430200 Bangalore, India Tel:91-806-53-76817 West Milpitas, CA Tel:408-433-9950 Mexico Guadalajara, Jalisco Tel:52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2036_T262_AXIAL • 3/6/2015 10 Tantalum Through-Hole Capacitors – Hermetically Sealed T262 Series Axial MIL–PRF–39003 (CSR21 Style) Disclaimer Allproductspecifications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand verifyingtheextenttowhichtheInformationcontainedinthispublicationisapplicabletoanorderatthetimetheorderisplaced. AllInformationgivenhereinisbelievedtobeaccurateandreliable,butitispresentedwithoutguarantee,warranty,orresponsibilityofanykind,expressedorimplied. StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuchapplications,butare notintendedtoconstitute–andKEMETspecificallydisclaims–anywarrantyconcerningsuitabilityforaspecificcustomerapplicationoruse.TheInformationisintendedforuseonly bycustomerswhohavetherequisiteexperienceandcapabilitytodeterminethecorrectproductsfortheirapplication.AnytechnicaladviceinferredfromthisInformationorotherwise providedbyKEMETwithreferencetotheuseofKEMET’sproductsisgivengratis,andKEMETassumesnoobligationorliabilityfortheadvicegivenorresultsobtained. AlthoughKEMETdesignsandmanufacturesitsproductstothemoststringentqualityandsafetystandards,giventhecurrentstateoftheart,isolatedcomponentfailuresmaystill occur.Accordingly,customerapplicationswhichrequireahighdegreeofreliabilityorsafetyshouldemploysuitabledesignsorothersafeguards(suchasinstallationofprotective circuitryorredundancies)inordertoensurethatthefailureofanelectricalcomponentdoesnotresultinariskofpersonalinjuryorpropertydamage. Althoughallproduct–relatedwarnings,cautionsandnotesmustbeobserved,thecustomershouldnotassumethatallsafetymeasuresareindictedorthatothermeasuresmaynot be required. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2036_T262_AXIAL • 3/6/2015 11