Tantalum Through-Hole Capacitors – Hermetically Sealed T245 Series Axial High Temperature Solder (CSR23 Style) Overview Applications The KEMET standard MIL case hermetically sealed T245 Series (Extended Capacitance Range) is compact, ruggedly built and designed for miniaturized circuitry. The capacitors are especially well-suited for coupling, bypass filtering and RC timing circuits. The T245 Series exhibits excellent stability, low DC leakage current, dissipation factor, and ESR/impedance over a wide temperature and frequency range. Typical applications include coupling, bypass, filtering and RC timing circuits in miniaturized circuitry. Benefits • • • • • • • • • • • Internal construction solder to resist up to 221ºC Operating temperature range of -55˚C to +125˚C Qualified to MIL–PRF–39003 (CSR23 Style) Failure rate options: Graded - B, C, D, and G and Exponential - M, P, R, and S Capacitance values of 1.2 μF to 1,000 μF Tolerances of ±10% and ±20% Voltage rating of 6 VDC – 50 VDC Surge current options D, E, and F Taped and reeled per EIA Specification RS–296 Marking per MIL–STD–1285 Case sizes: A, B, C, D One world. One KEMET © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2067_T245 • 3/6/2015 1 Tantalum Through-Hole Capacitors – Hermetically Sealed T245 Series Axial High Temperature Solder (CSR23 Style) Ordering Information T Capacitor Class T= Tantalum 245 A 105 A S 7200 Series Case Size Capacitance Code (pF) Capacitance Rated Voltage Tolerance (VDC) Failure Rate/Military Product Only Termination Finish Specification A, B, C, D First two digits represent significant figures. Third digit specifies number of zeros. K = ±10% M = ±20% Graded: S = Standard B = 0.1%/k hours C = 0.01%/k hours D = 0.001%/k hours G = 1.0%/k hours Exponential: M = 1%/k hours P = 0.1%/k hours R = 0.01%/k hours S = 0.001%/k hours Hermetically Sealed Axial High Temperature Solder K 050 006 = 6 010 = 10 015 = 15 020 = 20 035 = 35 050 = 50 All capacitors are sleeved unless specified. 0100 = Without sleeve 7200 = Tape & Reel 7293 & 7443 = Ammo 4250 = 10 cycles, 25°C after Weibull 4251 = 10 cycles, -55 & 85°C after Weibull 4252 = 10 cycles, -55 & 85°C before Weibull Ordering Information – (CSR23 Style) M39003 /03 3075 E Capacitor Class Slash Dash Number Surge Option Military Specification Number Specification Sheet Number Failure Rate Level D = C-4250 E = C-4251 F = C-4252 H = No C-Spec Orders should be entered by the military specification number, including the dash number and surge option letter (D, E, F, or H). Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range DF (120 Hz at 25°C) Leakage Current Failure Rate (MIL–PRF–39003, CSR23 capacitors only) -55°C to 125°C 1.2 – 1,000 μF at 120 Hz/25°C K Tolerance (10%), M Tolerance (20%) 6 – 50 V Refer to Part Number Electrical Specification Table Refer to Part Number Electrical Specification Table (at rated voltage up to +85°C and 2/3 of rated voltage applied at 125°C) Approved failure rate: Graded G (1.0%/k hours), B (0.1%/k hours), C (0.01%/k hours), D (0.001%/k hours) and Exponential M (1.0%/k hours), P (0.1%/k hours), R (0.01%/k hours), S (0.001%/k hours) © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2067_T245 • 3/6/2015 2 Tantalum Through-Hole Capacitors – Hermetically Sealed T245 Series Axial High Temperature Solder (CSR23 Style) Dimensions – Inches (Millimeters) Case Size Uninsulated Insulated D ±0.005 L ±0.031 D ±0.010 L ±0.031 B ±0.002 C ±(.13) ±(.79) ±(.25) ±(.79) ±(.05) Maximum A 0.125 (3.18) B 0.175 (4.45) 0.438 (11.13) 0.185 (4.70) 0.474 (12.04) 0.020 (0.51) 0.610 (15.49) C 0.279 (7.09) 0.650 (16.51) 0.289 (7.34) 0.686 (17.42) 0.025 (0.64) 0.822 (20.88) D 0.341 (8.66) 0.750 (19.05) 0.351 (8.92) 0.786 (19.96) 0.025 (0.64) 0.922 (23.42) 0.250 (6.35) 0.135 (3.43) 0.286 (7.26) 0.020 (0.51) 0.422 (10.72) © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2067_T245 • 3/6/2015 3 Tantalum Through-Hole Capacitors – Hermetically Sealed T245 Series Axial High Temperature Solder (CSR23 Style) Table 1 – Ratings & Part Number Reference MIL–PRF–39003 (CSR23) Capacitors Rated Rated Voltage Capacitance Dash Number Reference Case Size Code KEMET Military Part Number DC Leakage DF % at 25°C (See below for part options) T245A106K006(1)S T245A106M006(1)S T245A126K006(1)S T245B107K006(1)S T245B107M006(1)S T245C337K006(1)S T245C337M006(1)S T245C397K006(1)S T245C477K006(1)S T245C477M006(1)S T245D687K006(1)S T245D687M006(1)S T245D827K006(1)S T245D108K006(1)S T245D108M006(1)S T245A685K010(1)S T245A685M010(1)S T245A825K010(1)S T245B476K010(1)S T245B476M010(1)S T245B566K010(1)S T245B686K010(1)S T245B686M010(1)S T245B826K010(1)S T245C227K010(1)S T245C227M010(1)S T245C277K010(1)S T245D397K010(1)S T245D477K010(1)S T245D477M010(1)S T245D567K010(1)S T245A475K015(1)S T245A475M015(1)S T245A565K015(1)S T245B336K015(1)S T245B336M015(1)S T245B396K015(1)S T245C157K015(1)S T245C157M015(1)S T245C187K015(1)S T245D227K015(1)S T245D227M015(1)S T245D277K015(1)S T245D337K015(1)S T245D337M015(1)S T245A275K020(1)S T245A335K020(1)S T245A335M020(1)S T245A395K020(1)S T245B186K020(1)S µA at 25°C Max/5 Minutes 0.9 0.9 1.0 6.0 6.0 10.0 10.0 10.0 10.0 10.0 20.0 20.0 20.0 20.0 20.0 1.0 1.0 1.2 4.0 4.0 5.0 6.0 6.0 7.0 12.0 12.0 13.0 16.0 16.0 16.0 20.0 1 1 1.3 5 5 5.3 15 15 15 20 20 20 20 20 0.8 1.0 1.0 1.2 3.0 120 Hz Maximum 6 6 6 6 6 8 8 10 10 10 10 10 10 10 10 6 6 6 6 6 6 6 6 6 8 8 8 10 10 10 10 4 4 4 6 6 6 8 8 8 8 8 8 8 8 4 4 4 4 6 M (1.0) 01010102010301040105010601070108010901100111011201130114011501160117011801190120012101220123012401250126012701280129013001310132013301340135013601370138013901400141014201430144014501460147014801490150- P (0.1) 02010202020302040205020602070208020902100211021202130214021502160217021802190220022102220223022402250226022702280229023002310232023302340235023602370238023902400241024202430244024502460247024802490250- R (0.01) 03010302030303040305030603070308030903100311031203130314031503160317031803190320032103220323032403250326032703280329033003310332033303340335033603370338033903400341034203430344034503460347034803490350- S (0.001) 04010402040304040405040604070408040904100411041204130414041504160417041804190420042104220423042404250426042704280429043004310432043304340435043604370438043904400441044204430444044504460447044804490450- G (1) 50015002500350045005500650075008500950105011501250135014501550165017501850195020502150225023502450255026502750285029503050315032503350345035503650375038503950405041504250435044504550465047504850495050- B (0.1) 20012002200320042005200620072008200920102011201220132014201520162017201820192020202120222023202420252026202720282029203020312032203320342035203620372038203920402041204220432044204520462047204820492050- C (0.01) 30013002300330043005300630073008300930103011301230133014301530163017301830193020302130223023302430253026302730283029303030313032303330343035303630373038303930403041304230433044304530463047304830493050- D (0.001) 40014002400340044005400640074008400940104011401240134014401540164017401840194020402140224023402440254026402740284029403040314032403340344035403640374038403940404041404240434044404540464047404840494050- (see below for part options) µA at 25°C Max/5 Minutes 120 Hz Maximum M (1.0) P (0.1) R (0.01) S (0.001) G (1) B (0.1) C (0.01) D (0.001) KEMET Part Number DC Leakage DF % at 25°C Failure Rate Level (%/1,000 hours) MIL–PRF–39003/3J MIL–PRF–39003/3J Exponential VDC µF 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 15 15 15 15 15 15 15 15 15 15 15 15 15 15 20 20 20 20 20 10.0 10.0 12.0 100.0 100.0 330.0 330.0 390.0 470.0 470.0 680.0 680.0 820.0 1000.0 1000.0 6.8 6.8 8.2 47.0 47.0 56.0 68.0 68.0 82.0 220.0 220.0 270.0 390.0 470.0 470.0 560.0 4.7 4.7 5.6 33.0 33.0 39.0 150.0 150.0 180.0 220.0 220.0 270.0 330.0 330.0 2.7 3.3 3.3 3.9 18.0 A A A B B C C C C C D D D D D A A A B B B B B B C C C D D D D A A A B B B C C C D D D D D A A A A B VDC µF Rated Voltage Rated Capacitance Case Size Code Graded MIL–PRF–39003 (CSR23) Capacitors (1) To complete KEMET Part Number (T245), insert Graded failure rate: G for 1%/k hours, B for .1%/k hours, C for .01%/k hours, D for .001%/k hours or the exponential rate letter. Designates Reliability Level. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2067_T245 • 3/6/2015 4 Tantalum Through-Hole Capacitors – Hermetically Sealed T245 Series Axial High Temperature Solder (CSR23 Style) Table 1 – Ratings & Part Number Reference cont'd MIL–PRF–39003 (CSR23) Capacitors Rated Rated Voltage Capacitance Dash Number Reference Case Size Code KEMET Military Part Number DC Leakage DF % at 25°C (See below for part options) T245B226K020(1)S T245B226M020(1)S T245B276K020(1)S T245C566K020(1)S T245C686K020(1)S T245C686M020(1)S T245C826K020(1)S T245C107K020(1)S T245C107M020(1)S T245C127K020(1)S T245D157K020(1)S T245D157M020(1)S T245D187K020(1)S T245A185K035(1)S T245B825K035(1)S T245B106K035(1)S T245B106M035(1)S T245C336K035(1)S T245C336M035(1)S T245C396K035(1)S T245C476K035(1)S T245C476M035(1)S T245D566K035(1)S T245D686K035(1)S T245D686M035(1)S T245A125K050(1)S T245A155K050(1)S T245A155M050(1)S T245B565K050(1)S T245B685K050(1)S T245B685M050(1)S T245C226K050(1)S T245C226M050(1)S T245C276K050(1)S T245D336K050(1)S T245D336M050(1)S T245D396K050(1)S µA at 25°C Max/5 Minutes 3.0 3.0 4.0 7.0 8.0 8.0 10.0 12.0 12.0 12.0 15.0 15.0 15.0 1.0 3.0 3.0 3.0 8.0 8.0 10.0 10.0 10.0 12.0 12.0 12.0 0.6 0.8 0.8 2.5 2.5 2.5 7.0 7.0 8.0 10.0 10.0 10.0 120 Hz Maximum 6 6 6 6 6 6 6 6 6 6 8 8 8 4 4 4 4 6 6 6 6 6 6 6 6 4 4 4 4 4 4 6 6 6 6 6 6 M (1.0) 0151015201530154015501560157015801590160016101620163016401650166016701680169017001710172017301740175017601770178017901800181018201830184018501860187- P (0.1) 0251025202530254025502560257025802590260026102620263026402650266026702680269027002710272027302740275027602770278027902800281028202830284028502860287- R (0.01) 0351035203530354035503560357035803590360036103620363036403650366036703680369037003710372037303740375037603770378037903800381038203830384038503860387- S (0.001) 0451045204530454045504560457045804590460046104620463046404650466046704680469047004710472047304740475047604770478047904800481048204830484048504860487- G (1) 5051505250535054505550565057505850595060506150625063506450655066506750685069507050715072507350745075507650775078507950805081508250835084508550865087- B (0.1) 2051205220532054205520562057205820592060206120622063206420652066206720682069207020712072207320742075207620772078207920802081208220832084208520862087- C (0.01) 3051305230533054305530563057305830593060306130623063306430653066306730683069307030713072307330743075307630773078307930803081308230833084308530863087- D (0.001) 4051405240534054405540564057405840594060406140624063406440654066406740684069407040714072407340744075407640774078407940804081408240834084408540864087- (see below for part options) µA at 25°C Max/5 Minutes 120 Hz Maximum M (1.0) P (0.1) R (0.01) S (0.001) G (1) B (0.1) C (0.01) D (0.001) KEMET Part Number DC Leakage DF % at 25°C Failure Rate Level (%/1,000 hours) MIL–PRF–39003/3J MIL–PRF–39003/3J Exponential VDC µF 20 20 20 20 20 20 20 20 20 20 20 20 20 35 35 35 35 35 35 35 35 35 35 35 35 50 50 50 50 50 50 50 50 50 50 50 50 22.0 22.0 27.0 56.0 68.0 68.0 82.0 100.0 100.0 120.0 150.0 150.0 180.0 1.8 8.2 10.0 10.0 33.0 33.0 39.0 47.0 47.0 56.0 68.0 68.0 1.2 1.5 1.5 5.6 6.8 6.8 22.0 22.0 27.0 33.0 33.0 39.0 B B B C C C C C C C D D D A B B B C C C C C D D D A A A B B B C C C D D D VDC µF Rated Voltage Rated Capacitance Case Size Code Graded MIL–PRF–39003 (CSR23) Capacitors (1) To complete KEMET Part Number (T245), insert Graded failure rate: G for 1%/k hours, B for .1%/k hours, C for .01%/k hours, D for .001%/k hours or the exponential rate letter. Designates Reliability Level. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2067_T245 • 3/6/2015 5 Tantalum Through-Hole Capacitors – Hermetically Sealed T245 Series Axial High Temperature Solder (CSR23 Style) Ripple Current/Ripple Voltage Permissible AC ripple voltage is related to the ESR of the capacitor and the power dissipation capabilities of a particular case size. Thermal capacities for the various case sizes have been determined empirically and are listed below. Temperature Compensation Multipliers for Maximum Power Dissipation T ≤ 25°C 1.00 T ≤ 85°C 0.90 T ≤ 125°C 0.40 T= Environmental Temperature Permissible AC ripple current can be determined by the following: I(max) = Z √P max/R Case Size Maximum Power Dissipation (P max) T2XX A 0.09 0.070 B 0.100 0.090 C 0.125 – D 0.180 – Maximum Power Dissipation: 25°C Ambient P max = maximum watts R = ESR at specified frequency (ohms) I = rms ripple current (amperes) Z = capacitor impedance in ohms at the specified frequency Optimum Solder Wave Profile © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2067_T245 • 3/6/2015 6 Tantalum Through-Hole Capacitors – Hermetically Sealed T245 Series Axial High Temperature Solder (CSR23 Style) Mounting All encased capacitors will pass the Resistance to Soldering Heat Test of MIL–STD–202, Method 210, Condition C. This test simulates wave solder of topside board mount product. This demonstration of resistance to solder heat is in accordance with what is believed to be the industry standard. More severe treatment must be considered reflective of an improper soldering process. The above figure is a recommended solder wave profile for both axial and radial leaded solid tantalum capacitors. Capacitor Marking Case B Case A Military Specification Number 39003 03 - K 6003H J 316 + AAAA Specification Sheet Number & K = KEMET Military Dash Number & J = January Date Code & Polarity Lot Symbol M39003 Military Specification Number 6003H J 31433 316 AAAA + Military Dash Number & J = January 03 Specification Sheet Number Source Code Date Code , Polarity & Lot Symbol Date Code 1 digit = Last number of Year 2 = 2012 3 = 2013 4 = 2014 2nd and 3rd digit = Week of the Year 11 = 2nd week of March st © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2067_T245 • 3/6/2015 7 Tantalum Through-Hole Capacitors – Hermetically Sealed T245 Series Axial High Temperature Solder (CSR23 Style) Storage Tantalum hermetically sealed capacitors should be stored in normal working environments. While the capacitors themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability capacitors stock should be used promptly, preferably within three years of receipt. Tape & Reel Packaging Information KEMET offers standard reeling of Solid Tantalum Capacitors for automatic insertion or lead forming machines per EIA Specification RS-296E. Table 2 – Packaging Quantity Case Size Standard Bulk Quantity Standard Reel Quantity Reel C-Spec Ammo Pack Quantity Ammo Pack C-Spec A 150/Box 3,500 C-7200 1,500 C-7293 B 75/Box 2,500 C-7200 1,000 Class I C 20/Tray 500 C-7200 250 C-7442 D 20/Tray 400 C-7200 250 Class II C-7443 Class III © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2067_T245 • 3/6/2015 8 Tantalum Through-Hole Capacitors – Hermetically Sealed T245 Series Axial High Temperature Solder (CSR23 Style) Figure 2 Figure 3 12" (30.48cm) * 0.059" to 0.315" Greater Than Component Length White (+) (Anode) Blue ( –) (Cathode) 0.047" Maximum (1.20) Hub 0.655" ±0.010 Hole (15.9 ±0.25) * 3 1 /4 " (82.6) 1/ " 8 (3.18) See Table 3 "B" See Table 3 "A" 0.250" Nominal (6.35) Table 3 – Tape Dimensions Component Body Diameter Component Pitch "A" Inside Tape Spacing "B" ±1.5 mm (0.059") 0.020" or (±0.5 mm) I II III 0" (0 mm) to 0.197" (5 mm) 0.200" or (5 mm) 2.062" 2.500" 2.874" 0.197" (5.01 mm) to 0.394" (10 mm) 0.400 or (10 mm) (52.4 mm) (63.5 mm) (73 mm) CapacitorsarereeledsothatpositiveleadsareorientedasshowninFigure3.Kraftpaper(50lb.testminimum)isinsertedbetween thelayersofcapacitorswoundonreelsforcomponentpitch≤0.200"sizesandcorrugatedpaper(70lb.testminimum),singlefacedis insertedforcomponentpitch≥0.400"sizes.Capacitorleadlengthmayextendonlyamaximumof.031"(0.8mm)beyondthetape’s edges.Capacitorsarecenteredinarowbetweenthetwotapesandwilldeviateonly±0.031"(0.79mm)fromtherowcenter.Figures 1and2showtheKEMETstandardchipboardtapereel.Aminimumof36"(91.5cm)leadertapeisprovidedateachendofthereeled capacitors. Universal splicing clips are used to connect the tape. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2067_T245 • 3/6/2015 9 Tantalum Through-Hole Capacitors – Hermetically Sealed T245 Series Axial High Temperature Solder (CSR23 Style) KEMET Corporation World Headquarters Europe Asia Southern Europe SassoMarconi,Italy Tel:39-051-939111 Northeast Asia Hong Kong Tel:852-2305-1168 MailingAddress: P.O. Box 5928 Greenville, SC 29606 Skopje, Macedonia Tel:389-2-55-14-623 Shenzhen, China Tel:86-755-2518-1306 www.kemet.com Tel:864-963-6300 Fax:864-963-6521 Central Europe Landsberg,Germany Tel:49-8191-3350800 Corporate Offices FortLauderdale,FL Tel:954-766-2800 Kamen,Germany Tel:49-2307-438110 North America Northern Europe Harlow, United Kingdom Tel:44-1279-460122 Taipei, Taiwan Tel:886-2-27528585 Espoo,Finland Tel:358-9-5406-5000 Southeast Asia Singapore Tel:65-6701-8033 2835KEMETWay Simpsonville, SC 29681 Southeast LakeMary,FL Tel:407-855-8886 Northeast Wilmington, MA Tel:978-658-1663 Central Novi,MI Tel:248-306-9353 Beijing, China Tel:86-10-5877-1075 Shanghai, China Tel:86-21-6447-0707 Seoul, South Korea Tel:82-2-6294-0550 Penang,Malaysia Tel:60-4-6430200 Bangalore, India Tel:91-806-53-76817 West Milpitas, CA Tel:408-433-9950 Mexico Guadalajara, Jalisco Tel:52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2067_T245 • 3/6/2015 10 Tantalum Through-Hole Capacitors – Hermetically Sealed T245 Series Axial High Temperature Solder (CSR23 Style) Disclaimer Allproductspecifications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand verifyingtheextenttowhichtheInformationcontainedinthispublicationisapplicabletoanorderatthetimetheorderisplaced. AllInformationgivenhereinisbelievedtobeaccurateandreliable,butitispresentedwithoutguarantee,warranty,orresponsibilityofanykind,expressedorimplied. StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuchapplications,butare notintendedtoconstitute–andKEMETspecificallydisclaims–anywarrantyconcerningsuitabilityforaspecificcustomerapplicationoruse.TheInformationisintendedforuseonly bycustomerswhohavetherequisiteexperienceandcapabilitytodeterminethecorrectproductsfortheirapplication.AnytechnicaladviceinferredfromthisInformationorotherwise providedbyKEMETwithreferencetotheuseofKEMET’sproductsisgivengratis,andKEMETassumesnoobligationorliabilityfortheadvicegivenorresultsobtained. AlthoughKEMETdesignsandmanufacturesitsproductstothemoststringentqualityandsafetystandards,giventhecurrentstateoftheart,isolatedcomponentfailuresmaystill occur.Accordingly,customerapplicationswhichrequireahighdegreeofreliabilityorsafetyshouldemploysuitabledesignsorothersafeguards(suchasinstallationofprotective circuitryorredundancies)inordertoensurethatthefailureofanelectricalcomponentdoesnotresultinariskofpersonalinjuryorpropertydamage. Althoughallproduct–relatedwarnings,cautionsandnotesmustbeobserved,thecustomershouldnotassumethatallsafetymeasuresareindictedorthatothermeasuresmaynot berequired. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2067_T245 • 3/6/2015 11