R61 Series Features • • Programmable, DPDT, 10 Amp, AC or DC, Delay On Release Time Delay Relays. D36 TIME RANGE Min Max 0.1 0.25 0.15 0.5 0.3 1.0 0.5 2.0 1.0 4.0 2.0 8.0 4.0 15 8.0 30 15 60 30 120 Knob Style A B C D E F G H I J .242 (6.2) Alternate Knob Style .600 (15.24) Switches are recessed. K L M N O P 2.800 (71.12) 1.0 2.0 4.0 8.0 15 30 4.0 8.0 15 30 60 120 Seconds • • • 16 Time Ranges in Single Timer (0.1 sec. to 120 min.) User Sets Time Ranges No Math − Just Flip Switches Instructions Right on Unit Fine Tuning Knob for Precision Timing Pin for Pin Interchangeable with Timers in the Field − No Rewiring AC or DC Operation CMOS Digital Circuitry − 0.5% Repeatable Accuracy Minutes • • DPDT, 2 Form “C” Ext. Switch 2.400 (60.96) OPERATION DELAY ON RELEASE− Input voltage must be applied continuously to operate the internal relay. When the control switch is closed, the relay energizes. When the control switch is opened, timing begins. When timing is complete, the relay will deenergize. Time may be reset to zero during timing by closing the control switch. CONTINUOUS ON POWER OFF CONTROL SWITCH ON OUTPUT SWITCHING ON 6 5 1.770 (44.95) 7 8 4 3 9 2 (DC) + (AC) L 10 1 11 INPUT − (DC) N (AC) Electrical Specifications OFF Contact Rating: 10 Amps 240VAC or less, 1/3 HP, 240VAC or 120VAC Pilot Duty 345VA, 120VAC or 240VAC, 50/60HZ Life: 5000,000 operations at full load Mechanical Life: 7,000,000 operations at no load DELAY OFF Input Nominal Input voltage: See Chart Steady state input current: See Chart AC or DC OPERATED Timing Max. Contact Cur. @ 28VDC or 120VAC Diag No. Nom. Voltage Contact Arr. Input Cur. Nom. R61−11AD10−12 12VAC/DC DPDT 167mA 10A D36 R61−11AD10−24 24VAC/DC DPDT 83mA 10A D36 R61−11AD10−120 120VAC/DC DPDT 17mA 10A D36 NTE Type No. Timing adjustment modes available: See Timing Range Chart Repeat Accuracy ± 0.5% − after established at steady temperature (4 hours) Timing tolerance at high end of range: −0, +10% Timing tolerance at low end of range: +0, −50% Reset Time: 60 mS typ Protection ACCESSORIES MOUNTING STYLES DESCRIPTION NTE TYPE NO. SURFACE MOUNT 11−PIN OCTAL R95−104 PANEL MOUNT 11−PIN OCTAL R95−119 DIN RAIL MOUNT 11−PIN OCTAL R95−114 DIN RAIL MOUNT 11−PIN OCTAL R95−182 NTE Electronics, Inc. Voice (973) 748−5089 Transient: surge test 10,000V for 20 mS Dielectric Breakdown Coil To Contact: 1850 VAC Across Open Contact: 1850 VAC Environmental Characteristics Operating: −20°C to +55°C Weight Std: 4.5 oz (130 grams) approx. FAX (973) 748−6224 http://www.nteinc.com 67