PLETRONICS RoHS 6/6 Compliant Crystal Controlled Oscillators LVDS OUTPUT LV55D Series LV77D Series LCC Ceramic Package 3.2 x 5.0 x 1.35 mm 3rd Overtone crystal Enable/Disable function on pad 1 Small SMD package for high density board designs LCC Ceramic Package 5.0 x 7.0 x 1.7 mm 3rd Overtone crystal Enable/Disable function on pad 1 LV55F and LV55G Series LV77F and LV77G Series LCC Ceramic Package 3.2 x 5.0 x 1.35 mm LV55F is Fundamental crystal LV55G is 3rd Overtone crystal Improved rise and fall times Enable/Disable function on pad 1 Small SMD package for high density board designs LCC Ceramic Package 5.0 x 7.0 x 1.7 mm LV77F is Fundamental crystal LV77G is 3rd Overtone crystal Improved rise and fall times Enable/Disable function on pad 1 LV99D Series LV44F and LV44G Series 3.3 Volt Only LCC Ceramic Package 5.0 x 7.0 x 1.7 mm Advanced Synthesized design uses a fundamental mode crystal Frequencies from 10MHz to over 600MHz. Pletronics Part Series LCC Ceramic Package 2.5x 3.2 x 1.0 mm LV44F is Fundamental crystal LV44G is 3rd Overtone crystal Improved rise and fall times Enable/Disable function on pad 1 Crystal Mode Frequency Range (MHz) Tr/Tf Maximum (pS) Duty Cycle % 3rd OT 80-325 900 LV44/55/77F Fund. 13-110 LV44/55/77G 3rd OT Fund. Synth. LV55/77D LV99D Current with Load (ma) 12KHz20MHz 10Hz20MHz 45-55 0.4 2.6 66 400 45-55 0.4 1.0 27 35-220 400 45-55 0.4 0.9 40 10.9-670 300 47-53 0.6 2.1 90 FEATURES Typical RMS Jitter (pS) Part Numbering Excellent phase noise characteristics All have Tri-State with Power Standby modes Temp range: - 10° to +70°C Standard, -40° to +85°C Extended Available Tolerances: +/- 20PPM, +/- 25PPM, and +/- 50PPM Most common frequencies in stock Pletronics, Inc. (425)-776-1880, Fax: (425) 776-2760, www.pletronics.com Supply Voltage 2.5V 3.3V APPLICATIONS Ideal reference clocks for high-speed applications requiring low jitter, including: 1/10 Gigabit Ethernet 2/4/10G Fibre Channel Server & Storage platforms SONET/SDH linecards. SGC001 (REV-F) PLETRONICS Crystal Controlled Oscillators PECL OUTPUT RoHS 6/6 Compliant PE55D Series LCC Ceramic Package 3.2 x 5.0 x 1.35 mm 3rd Overtone crystal Enable/Disable function on pad 1 Small SMD package for high density board designs PE77D Series LCC Ceramic Package 5.0 x 7.0 x 1.7 mm 3rd Overtone crystal Enable/Disable function on pad 1 PE55F and PE55G Series PE77F and PE77G Series LCC Ceramic Package 3.2 x 5.0 x 1.35 mm PE55F is Fundamental crystal PE55G is 3rd Overtone crystal Improved rise and fall times Enable/Disable function on pad 1 LCC Ceramic Package 5.0 x 7.0 x 1.7 mm PE77F is Fundamental crystal PE77G is 3rd Overtone crystal Improved rise and fall times Enable/Disable function on pad 1 PE99D Series PE44F and PE44G Series 3.3 Volt Only LCC Ceramic Package 5.0 x 7.0 x 1.7 mm Advanced Synthesized design uses a fundamental mode crystal Frequencies from 10MHz to over 1-GHz. Pletronics Part Series Crystal Mode PE55/77D Frequency Range (MHz) LCC Ceramic Package 2.5x 3.2 x 1.0 mm PE44F is Fundamental crystal PE44G is 3rd Overtone crystal Improved rise and fall times Enable/Disable function on pad 1 Tr/Tf Maximum (pS) Duty Cycle % Typical RMS Jitter (pS) 12KHz20MHz 10Hz20MHz Current with Load (ma) 3rd OT 40-250 700 45-55 0.4 2.6 90 PE44/55/77F Fund. 13-110 400 45-55 0.9 1.0 27 PE44/55/77G 3rd OT 35-220 400 45-55 0.4 0.9 40 Fund. Synth. 10.9-766 876-1,170 300 47-53 0.6 2.1 90 PE99D FEATURES Part Numbering Excellent phase noise characteristics Temp range: - 10° to +70°C Standard, -40° to +85°C Extended Available Tolerances: +/- 20PPM, +/- 25PPM, and +/- 50PPM Most common frequencies in stock Pletronics, Inc. (425)-776-1880, Fax: (425) 776-2760, www.pletronics.com Supply Voltage 2.5V 3.3V APPLICATIONS Ideal reference clocks for high-speed applications requiring low jitter, including: 1/10 Gigabit Ethernet 2/4/10G Fibre Channel Server & Storage platforms SONET/SDH linecards. SGC001 (REV-F)