PLETRONICS Crystal Controlled Oscillators LVDS OUTPUT RoHS 6/6 Compliant LV44J Series 2.5 x 3.2 x 1.0 mm LCC Ceramic Package 3rd Overtone crystal Low Jitter Enable/Disable function on pad 1 LV55J Series 3.2 x 5.0 x 1.35 mm LCC Ceramic Package 3rd Overtone crystal Low Jitter Enable/Disable function on pad 1 LV55F & LV55G Series APPLICATIONS: Ideal reference clocks for high-speed applications requiring low jitter, including: 10/40/100 Gigabit Ethernet 16-32G Fibre Channel 100G/400G Opticlal Transport Networks SONET/SDH linecards. LV77J Series 5.0 x 7.0 x 1.7 mm LCC Ceramic Package 3rd Overtone crystal Low Jitter Enable/Disable function on pad 1 3.2 x 5.0 x 1.35 mm LV77F & LV77G Series 5.0 x 7.0 x 1.7 mm LCC Ceramic Package LV55F is Fundamental crystal LV55G is 3rd Overtone crystal Improved rise and fall times Enable/Disable function on pad 1 LCC Ceramic Package LV77F is Fundamental crystal LV77G is 3rd Overtone crystal Improved rise and fall times Enable/Disable function on pad 1 LV99D Series 5.0 x 7.0 x 1.7 mm LCC Ceramic Package 3.3 Volt Only Advanced Synthesized design uses a fundamental mode crystal Frequencies from 10MHz to over 600MHz LV44F and LV44G Series LV55D Series (Standard) LV77D Series (Standard) 3.2 x 5.0 x 1.35 mm LCC Ceramic Package 3rd Overtone crystal Enable/Disable function on pad 1 2.5x 3.2 x 1.0 mm LCC Ceramic Package LV44F is Fundamental crystal LV44G is 3rd Overtone crystal Improved rise and fall times Enable/Disable function on pad 1 5.0 x 7.0 x 1.7 mm LCC Ceramic Package 3rd Overtone crystal Enable/Disable function on pad 1 Pletronics Part Series Crystal Mode Frequency Range (MHz) Tr/Tf Maximum (pS) Duty Cycle % LV44/55/77J 3rd OT 100-175 500 45-55 0.1 LV44/55/77F Fund. 13-110 400 45-55 0.4 1.0 27 LV44/55/77G 3rd OT 35-220 400 45-55 0.4 0.9 40 Fund. Synth. 10.9-670 300 47-53 0.6 2.1 90 3rd OT 80-325 900 45-55 0.4 2.6 66 LV99D LV55/77D Typical RMS Jitter (pS) 12KHz20MHz 10Hz20MHz Current with Load (ma) 60 FEATURES Excellent phase noise characteristics Temp range: - 10° to +70°C Standard, -40° to +85°C Extended Available Tolerances: +/- 20PPM, +/- 25PPM and +/- 50PPM Most common frequencies in stock Jitter typical at 156.25 MHz Pletronics, Inc. (425) 776-1880, Fax: (425) 776-2760, www.pletronics.com SGC001 (REV-J) Supply Voltage 2.5V 3.3V PLETRONICS RoHS 6/6 Compliant Crystal Controlled Oscillators PECL OUTPUT PE44J Series APPLICATIONS: Ideal reference clocks for high-speed applications 2.5 x 3.2 x 1.0 mm LCC Ceramic Package 3rd Overtone crystal Low Jitter Enable/Disable function on pad 1 PE55J Series 3.2 x 5.0 x 1.35 mm LCC Ceramic Package 3rd Overtone crystal Low Jitter Enable/Disable function on pad 1 PE55F & PE55G Series PE77J Series 5.0 x 7.0 x 1.7 mm LCC Ceramic Package 3rd Overtone crystal Low Jitter Enable/Disable function on pad 1 3.2 x 5.0 x 1.35 mm LCC Ceramic Package PE55F is Fundamental crystal PE55G is 3rd Overtone crystal Improved rise and fall times Enable/Disable function on pad 1 PE99D Series requiring low jitter, including: 10/40/100 Gigabit Ethernet 16-32G Fibre Channel 100G-400G Optical Transport Networks SONET/SDH linecards PE77F & PE77G Series 5.0 x 7.0 x 1.7 mm LCC Ceramic Package PE77F is Fundamental crystal PE77G is 3rd Overtone crystal Improved rise and fall times Enable/Disable function on pad 1 5.0 x 7.0 x 1.7 mm PE44F and PE44G Series 2.5x 3.2 x 1.0 mm LCC Ceramic Package 3.3 Volt Only Advanced Synthesized design uses a fundamental mode crystal Frequencies from 10MHz to over 600MHz LCC Ceramic Package PE44F is Fundamental crystal PE44G is 3rd Overtone crystal Improved rise and fall times Enable/Disable function on pad 1 PE55D Series (Standard) PE77D Series (Standard) 3.2 x 5.0 x 1.35 mm LCC Ceramic Package 3rd Overtone crystal Enable/Disable function on pad 1 5.0 x 7.0 x 1.7 mm LCC Ceramic Package 3rd Overtone crystal Enable/Disable function on pad 1 Pletronics Part Series Crystal Mode Frequency Range (MHz) Tr/Tf Maximum (pS) Duty Cycle % PE44/55/77J 3rd OT 100-175 500 45-55 0.1 PE44/55/77F Fund. 13-110 400 45-55 0.9 1.0 27 PE44/55/77G 3rd OT 35-220 400 45-55 0.4 0.9 40 Fund. Synth. 10.9-766 876-1,170 300 47-53 0.6 2.1 90 3rd OT 40-250 700 45-55 0.4 2.6 90 PE99D PE55/77D Typical RMS Jitter (pS) 12KHz20MHz 10Hz20MHz 60 FEATURES Excellent phase noise characteristics Temp range: - 10° to +70°C Standard, -40° to +85°C Extended Available Tolerances: +/- 20PPM, +/- 25PPM and +/- 50PPM Most common frequencies in stock Jitter typical at 156.25 MHz Pletronics, Inc. (425) 776-1880, Fax: (425) 776-2760, www.pletronics.com Current with Load (ma) SGC001 (REV-J) Supply Voltage 2.5V 3.3V