Product: XRT75R06DIB‐F Package: 217L PBGA (23x23) Material Declaration Statement of Materials, Construction Material Component Material Weight % Name Weight (mg) Element/Compound CAS No. 1 Die 50.0466 Silicon 7440‐21‐3 50.0466 2.39 100.00 2 Die Attach 3.1410 Silver 7440‐22‐4 2.4107 0.12 76.75 Epoxy resin A 9003‐36‐5 0.3455 0.02 11.00 Epoxy resin B ‐ 0.1885 0.01 6.00 t‐Butylphenyl glycidyl ether 3101‐60‐8 0.1571 0.01 5.00 Phenolic Hardener ‐ 0.0314 0.00 1.00 Dicyandiamide 461‐58‐5 0.0079 0.00 0.25 Talc containing no asbestiform fibers 14807‐96‐6 8.8451 0.42 1.32 Morpholine derivative ‐ 0.1340 0.01 0.02 Barium Sulfate 7727‐43‐7 10.7883 0.52 1.61 3 Substrate 670.0800 5 6 Mold Compound Solder Ball Wire Total Unit Weight: /Total Unit / Component Silica,amorphous 7631‐86‐9 1.4072 0.07 0.21 Dipropylene Glycol Monomethyl Ether 34590‐94‐8 11.7934 0.56 1.76 Naphthalene 91‐20‐3 0.8711 0.04 0.13 Copper 7440‐50‐8 142.5588 6.81 21.27 Zinc 7440‐66‐6 0.0536 0.00 0.01 Chromium 7440‐47‐3 0.0134 0.00 0.00 Nickel 7440‐02‐0 0.0342 0.00 0.01 Continuous Filament Fiber Glass 67.4771 3.22 10.07 43.0191 2.05 6.42 Epoxy Resin 65997‐17‐3 105391‐33‐1/ 25722‐66‐1 9003‐36‐5 31.2927 1.49 4.67 Inorganic filler 21645‐51‐2/NA 16.8860 0.81 2.52 Cu 7440‐50‐8 41.5450 1.98 6.20 Ni 7440‐02‐0 33.7720 1.61 5.04 Cu 7440‐50‐8 241.2288 11.52 36.00 Bismaleimide/Triazine 4 Weight (mg) 876.9672 482.6670 11.0982 Au 7440‐57‐5 18.3602 0.88 2.74 Silica(Fused) 60676‐86‐0 786.6396 37.57 89.70 Epoxy resin ‐ 48.2332 2.30 5.50 Phenol resin ‐ 39.4635 1.88 4.50 Carbon Black 1333‐86‐4 2.6309 0.13 0.30 96.50 Tin 60676‐86‐0 465.7737 22.24 Silver 25550‐51‐0 14.4800 0.69 3.00 Copper 1333‐86‐4 2.4133 0.12 0.50 Gold 7440‐57‐5 11.0971 0.53 99.99 Impurity ‐ 0.0011 0.00 0.01 2094.0000 Component weight is based on homogenous material used to assemble the unit. | Composition derived from the material declaration from vendors. Exar Corporation 48720 Kato Road, Fremont, CA 94538 Phone: 510‐668‐7000 www.exar.com Reference No: MDS‐00000411 Rev 000 Material Declaration Statement of Materials, Construction Product: XRT75R06DIB‐F Package: 217L PBGA (23x23) RoHS Certificate of Compliance This package is fully RoHS compliant. The table above shows that this package meets the following RoHS requirements for EACH PACKAGE COMPONENT. ⊠ RoHS 2 (Recast) 2011/65/EU | Fully Compliant ⊠ China RoHS | Fully Compliant ⊠ RoHS‐6 | Fully Compliant ⊠ Non Use of PFOS & PFOA ⊠ REACH | Fully Compliant Allowable Limit (at EU RoHS Restricted Substance Cadmium & its compounds (Cd) Hexavalent Chromium & its compounds (Cr(VI)) homogenous material level) 100 ppm (0.01 weight %) 1000 ppm (0.10 weight %) Mercury & its compounds (HG) 1000 ppm (0.10 weight %) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers (PBDE) Lead & its compounds (Pb) 1000 ppm (0.10 weight %) 1000 ppm (0.10 weight %) 1000 ppm (0.10 weight %) ⊠ Halogen‐free | Green ⊠ Dodd‐Frank Wall Street Reform and Consumer Protection Act, July 21, 2010 We comply with this conflict metal free policy that restricts the use of those conflict metals, mining from the Democratic Republic of Congo (DRC) and it’s adjoining countries. Exar will not accept product which uses these conflict metals from these areas. We require our suppliers to enforce this policy and be able to identify and verify from their sources of minerals are conflict free. Suppliers are required to report if they or any supplier through their supply chain use any of these conflict metals that are derived from certain conflict minerals originating in the DRC or an adjoining country. Exar Corporation is not aware of any conflict metals to be used in any of their products. ⊠ Flammability rating of UL 94‐V0 ⊠ MSL Pb‐Free: L4 @ 245°C Chiew Mee Foo, QA Manager Exar Corporation 48720 Kato Road, Fremont, CA 94538 Phone: 510‐668‐7000 www.exar.com Reference No: MDS‐00000411 Rev 000