80/60 Amp Automotive Plug-In / PCB Power Relay PC796 FEATURES Designed for H Bridge Motor Drive Applications Utilizing the NC Contact for Dynamic Braking Contact Material, Coil Power and Contact Gaps Optimized NC Contact Bounce Significantly Reduced Contact Switching Capacity up to 240 Amps 80 Amps @ 14VDC Continuous Carrying Current 1250C Operating Temperature Plain Case, Bracket or PCB Options Lead Free and RoHS Compliant CONTACT RATINGS 24 VDC at 25oC CONTACT RATINGS 14 VDC at 25oC 1 Form C Contact Form Max Switching Current Normally Open Normally Closed Make 240 A(1) Make 180 A(1) Break 80 A Max Switching Power Max Switching Current Break 60 A 1,120 W Max Switching Voltage 60 A @ 25°C Make 90 A(1) Break 40 A 60 A @ 85°C 45 A @ 85°C Minimum Load 0.5A @ 12VDC Break 30 A 1,120 W Max Continuous Current CHARACTERISTICS 75 VDC 40 A @ 25°C 30 A @ 25°C 30 A @ 85°C 22.5 A @ 85°C 0.5A @ 12VDC CONTACT DATA Material Initial Contact Resistance Operate Time 7 msec Typical Release Time 2 msec Typical Insulation Resistance 100 MΩ min @ 500VDC Dielectric Strength Normally Closed Make 120 A(1) Max Switching Voltage 80 A @ 25°C Minimum Load Normally Open Max Switching Power 75 VDC Max Continuous Current 1 Form C Contact Form Service Life 50 Hz 500VRMS 1 min. Between Contact and Coil AgSnO2 ≤ 30mΩ initial Electrical 1 x 105 Operations Mechanical 1 x 107 Operations 50 Hz 500VRMS 1 min. Between Contacts Shock Resistance 147 m/s² 11 msec Vibration Resistance 10-40 Hz Double Amplitude 1.5mm Operating Temperature -40⁰C to +125⁰C Terminal Strength 8 N, 4N (PC Type) Storage Temperature -40⁰C to +155⁰C Solderability 235⁰C ± 2⁰C 3 sec ± 0.5 sec Relative Humidity Power Consumption 2.3 W ORDERING INFORMATION Example: 85% at 40⁰C Weight 47 grams (1)With current load applied for a maximum of 3 seconds at a maximum duty cycle of 10%. PC796 -1C -C -12 S -N -X Model: PC796 Contact Form: 1C Case Style: C: Plug-In; C1: Plastic Bracket; C2: Metal Bracket P: PCB; P1: PCB w/Plastic Bracket; P2: PCB w/Metal Bracket Coil Voltage: 6, 12, 24 Enclosure: C: Dust Cover; S: Sealed Parallel Component: Nil: None; D: Diode; R: Resistor; N: Nickel RoHS Compliant: -X Box Quantity: 400; Inner Box: 100 Resistor Values (1/4 Watt): 6V -180 ohm 12V - 680 ohm 24V - 2,700 ohm Diode: 1N4005 3220 Commander Drive, Suite 102 Carrollton, TX 75006 Sales: (972) 713-6272 (888) 997-3933 Fax: (972)735-0964 Dimensions are listed for reference purposes only. PC796 Rev D 4/28/15 www.PickerComponents.com e-mail: [email protected] Specifications and Availability subject to change without notice. 1 of 2 PC796 PC796 COIL DATA Coil Voltage (VDC) Rated Max 6 7.8 Resistance (Ohms ± 10%) Must Operate Voltage Max (VDC) Must Release Voltage Min. (VDC) 15.6 3.9 0.6 12 15.6 62.6 7.8 1.2 24 31.2 250.4 15.6 2.4 Power Consumption (W) 2.3 NOTES: The use of any coil voltage less that the rated voltage will compromise the operation of the relays. Must Operate Voltage is listed for test purposes only and is not to be used as design criteria. Pickup and release voltages are for test purposes only and are not to be used as design criteria. Dimensions are in mm, Inches are listed for reference only. DIMENSIONS (mm / inches) Metal Bracket “C2” PC Pins P” Plug In “C” 1A Plastic Bracket “C1” 1C Coil Temperature Rise @ 40A Carrying Current 1U Coil Temperature Rise 20oC Ambient 3220 Commander Drive, Suite 102 Carrollton, TX 75006 Sales: (972) 713-6272 (888) 997-3933 Fax: (972)735-0964 Dimensions are listed for reference purposes only. PC796 Rev D 4/28/15 Max Value for Switching Capacity www.PickerComponents.com e-mail: [email protected] Specifications and Availability subject to change without notice. 2 of 2