HD74LVC374A Octal D-type Flip Flops with 3-state Outputs REJ03D0355–0400Z (Previous ADE-205-113B (Z)) Rev.4.00 Jul. 27, 2004 Description The HD74 LVC374A has eight edge trigger D type flip flops with three state outputs in a 20 pin package. Data at the D inputs meeting set up requirements are transferred to the Q outputs on positive going transitions of the clock input. When the clock input goes low, data at the D inputs will be retained at the outputs until clock input returns high again. When a high logic level is applied to the output control input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. Low voltage and high-speed operation is suitable at the battery drive product (note type personal computer) and low power consumption extends the life of a battery for long time operation. Features • • • • • • • VCC = 2.0 V to 5.5 V All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) All outputs VOUT (Max.) = 5.5 V (@VCC = 0 V or output off state) Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25 °C) Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C) High output current ±24 mA (@VCC = 3.0 V to 5.5 V) Ordering Information Part Name Package Type Package Code Package Abbreviation Taping Abbreviation (Quantity) HD74LVC374AFPEL SOP–20 pin (JEITA) FP–20DAV FP EL (2,000 pcs/reel) HD74LVC374ATELL TSSOP–20 pin TTP–20DAV T ELL (2,000 pcs/reel) Note: Please consult the sales office for the above package availability. Function Table Inputs G CK D Output Q H L L L X ↑ ↑ L X L H X Z L H Q0 H: L: X: Z: ↑: Q0 : High level Low level Immaterial High impedance Low to high transition Level of Q before the indicated steady input conditions were established. Rev.4.00 Jul. 27, 2004 page 1 of 7 HD74LVC374A Pin Arrangement 20 VCC G 1 1Q 2 G Q G Q 19 8Q 1D 3 CK D CK D 18 8D 2D 4 CK D G Q CK D G Q 17 7D G Q G Q CK D CK D CK D G Q CK D G Q 2Q 5 3Q 6 3D 7 4D 8 4Q 9 GND 10 16 7Q 15 6Q 14 6D 13 5D 12 5Q 11 CK (Top view) Absolute Maximum Ratings Item Symbol Ratings Unit Supply voltage Input diode current Input voltage Output diode current VCC IIK VI IOK V mA V mA Output voltage VO Output current VCC, GND current / pin Storage temperature IO ICC or IGND Tstg –0.5 to 6.0 –50 –0.5 to 6.0 –50 50 –0.5 to VCC +0.5 –0.5 to 6.0 ±50 100 –65 to +150 V Conditions VI = –0.5 V VO = –0.5 V VO = VCC+0.5 V Output "H" or "L" Output "Z" or VCC:OFF mA mA °C Note: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. Rev.4.00 Jul. 27, 2004 page 2 of 7 HD74LVC374A Recommended Operating Conditions Item Symbol Ratings Unit Conditions Supply voltage VCC 1.5 to 5.5 V Data hold V V At operation G, CK, D Output "H" or "L" Output "Z" or VCC:OFF Input / output voltage VI VO Operating temperature Output current Ta IOH IOL Input rise / fall time *1 tr, tf 2.0 to 5.5 0 to 5.5 0 to VCC 0 to 5.5 –40 to 85 –12 –24*2 12 24*2 10 °C mA mA VCC = 2.7 V VCC = 3.0 V to 5.5 V VCC = 2.7 V VCC = 3.0 V to 5.5 V ns/V Notes: 1. This item guarantees maximum limit when one input switches. Waveform: Refer to test circuit of switching characteristics. 2. Duty cycle ≤ 50% Electrical Characteristics Ta = –40 to 85°C Item Symbol VCC (V) Min Max Unit Input voltage VIH 2.7 to 3.6 4.5 to 5.5 2.7 to 3.6 4.5 to 5.5 2.7 to 5.5 2.7 3.0 3.0 4.5 2.7 to 5.5 2.7 3.0 4.5 0 to 5.5 2.7 to 5.5 2.0 VCC×0.7 — — VCC–0.2 2.2 2.4 2.2 3.8 — — — — — — — — 0.8 VCC×0.3 — — — — — 0.2 0.4 0.55 0.55 ±5.0 ±5.0 V 0 2.7 to 3.6 2.7 to 5.5 3.0 to 3.6 — — — — 20 ±10 10 500 µA µA VIL Output voltage VOH VOL Input current Off state output current IIN IOZ Output leak current Quiescent supply current IOFF ICC ∆ICC Rev.4.00 Jul. 27, 2004 page 3 of 7 Test Conditions V V IOH = –100 µA IOH = –12 mA IOH = –24 mA V IOL = 100 µA IOL = 12 mA IOL = 24 mA µA µA VIN = 5.5 V or GND VIN = VCC, GND VOUT = 5.5 V or GND VIN / VOUT = 5.5 V VIN / VOUT = 3.6 to 5.5 V VIN = VCC or GND VIN = one input at(VCC–0.6)V, other inputs at VCC or GND µA HD74LVC374A Switching Characteristics Ta = –40 to 85°C From (Input) To (Output) ns CK Q ns G Q ns G Q Item Symbol VCC (V) Min Typ Max Unit Maximum clock frequency fmax tPLH tPHL Output enable time tZH tZL Output disable time tHZ tLZ Setup time tsu Hold time th Pulse width tw 80.0 100.0 125.0 — 1.5 — — 1.5 — — 1.5 — 2.0 2.0 2.0 1.5 1.5 1.5 3.3 3.3 3.3 — — — — — — 150.0 — — — — — — — — — — — — — — — — — — — — — — 3.0 15.0 — — — 9.5 8.5 7.0 9.5 8.5 7.0 8.5 7.5 6.5 — — — — — — — — — — 1.0 1.0 — — MHz Propagation delay time 2.7 3.3±0.3 5.0±0.5 2.7 3.3±0.3 5.0±0.5 2.7 3.3±0.3 5.0±0.5 2.7 3.3±0.3 5.0±0.5 2.7 3.3±0.3 5.0±0.5 2.7 3.3±0.3 5.0±0.5 2.7 3.3±0.3 5.0±0.5 2.7 3.3±0.3 5.0±0.5 2.7 2.7 Between output pins skew*1 tOSLH tOSHL Input capacitance Output capacitance Note: CIN CO 1. This parameter is characterized but not tested. tosLH = | tPLHm - tPLHn|, tosHL = | tPHLm - tPHLn| Rev.4.00 Jul. 27, 2004 page 4 of 7 ns ns ns ns pF pF HD74LVC374A Test Circuit VCC VCC Output G Input Zout = 50 Ω Input CL = 50 pF See Function Table Pulse generator 500 Ω S1 1Q to 8Q 450 Ω GND 50 Ω Scope 1D to 8D S1 Symbol Vcc=2.7V, 3.3±0.3V Vcc=5.0±0.5V OPEN OPEN GND GND 6V 2×Vcc t PLH / t PHL Pulse generator CK Zout = 50 Ω Note: OPEN *1 See under table t su / t h / t w t ZH/ t HZ t ZL / t LZ 1. CL includes probe and jig capacitance. Waveforms – 1 tf tr VIH 90 % 90 % Vref Input CK 10 % tr Vref 10 % tf GND VIH 90 % 90 % Input D 10 % 10 % t PHL t PLH GND VOH Output Q Vref Vref VOL Rev.4.00 Jul. 27, 2004 page 5 of 7 HD74LVC374A Waveforms – 2 tf tr VIH 90 % 90 % Vref Vref Input CK 10 % tw tsu Vref 10 % tw GND th VIH Input D Vref Vref GND Waveforms – 3 tf Input G tr 90 % Vref 10 % VIH 90 % Vref 10 % t ZL GND t LZ ≈V OH1 Vref Waveform - A t ZH Waveform - B VOL + 0.3 V t HZ VOH – 0.3 V Vref VOL VOH ≈V OL1 TEST VIH Vref VOH1 VOL1 Notes: Vcc=2.7V, 3.3±0.3V Vcc=5.0±0.5V 2.7 V Vcc 1.5 V 3V 50%Vcc GND GND Vcc 1. tr = 2.5 ns, tf = 2.5 ns 2. Input waveform : PRR = 10 MHz, duty cycle 50% 3. Waveform – A shows input conditions such that the output is "L" level when enable by the output control. 4. Waveform – B shows input conditions such that the output is "H" level when enable by the output control. Rev.4.00 Jul. 27, 2004 page 6 of 7 HD74LVC374A Package Dimensions As of January, 2002 Unit: mm 12.6 13 Max 11 1 10 5.5 20 *0.20 ± 0.05 2.20 Max 1.15 0˚ – 8˚ 0.10 ± 0.10 0.80 Max 0.20 7.80 +– 0.30 1.27 *0.40 ± 0.06 0.70 ± 0.20 0.15 0.12 M Package Code JEDEC JEITA Mass (reference value) *Pd plating FP–20DAV — Conforms 0.31 g As of January, 2002 Unit: mm 6.50 6.80 Max 11 1 10 4.40 20 0.65 *0.20 ± 0.05 1.0 0.13 M 6.40 ± 0.20 *Pd plating Rev.4.00 Jul. 27, 2004 page 7 of 7 0.07 +0.03 –0.04 0.10 *0.15 ± 0.05 1.10 Max 0.65 Max 0˚ – 8˚ 0.50 ± 0.10 Package Code JEDEC JEITA Mass (reference value) TTP–20DAV — — 0.07 g Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501 Renesas Technology Europe Limited. Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900 Renesas Technology Europe GmbH Dornacher Str. 3, D-85622 Feldkirchen, Germany Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11 Renesas Technology Hong Kong Ltd. 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2375-6836 Renesas Technology Taiwan Co., Ltd. FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. 26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 © 2004. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .1.0