RENESAS M37735MHLXXXHP

To all our customers
Regarding the change of names mentioned in the document, such as Mitsubishi
Electric and Mitsubishi XX, to Renesas Technology Corp.
The semiconductor operations of Hitachi and Mitsubishi Electric were transferred to Renesas
Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog
and discrete devices, and memory chips other than DRAMs (flash memory, SRAMs etc.)
Accordingly, although Mitsubishi Electric, Mitsubishi Electric Corporation, Mitsubishi
Semiconductors, and other Mitsubishi brand names are mentioned in the document, these names
have in fact all been changed to Renesas Technology Corp. Thank you for your understanding.
Except for our corporate trademark, logo and corporate statement, no changes whatsoever have been
made to the contents of the document, and these changes do not constitute any alteration to the
contents of the document itself.
Note : Mitsubishi Electric will continue the business operations of high frequency & optical devices
and power devices.
Renesas Technology Corp.
Customer Support Dept.
April 1, 2003
MITSUBISHI MICROCOMPUTERS
Y
NAR
M37735MHLXXXHP
MI
I
L
E
.
.
tion hange
c
ifica
pec ject to
s
l
fina
sub
ot a its are
is n
his tric lim
T
:
me
ice
Not e para
Som
PR
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
DESCRIPTION
●Interrupts ............................................................ 19 types, 7 levels
●Multiple-function 16-bit timer ................................................. 5 + 3
●Serial I/O (UART or clock synchronous) ...................................... 3
●10-bit A-D converter .............................................. 8-channel inputs
●12-bit watchdog timer
●Programmable input/output
(ports P0, P1, P2, P3, P4, P5, P6, P7, P8) ............................... 68
●Clock generating circuit ........................................ 2 circuits built-in
●Small package ...................... 80-pin plastic molded fine-pitch QFP
(80P6D-A;0.5 mm lead pitch)
The M37735MHLXXXHP is a single-chip microcomputer using the
7700 Family core. This single-chip microcomputer has a CPU and a
bus interface unit. The CPU is a 16-bit parallel processor that can be
an 8-bit parallel processor, and the bus interface unit enhances the
memory access efficiency to execute instructions fast. This
microcomputer also includes a 32 kHz oscillation circuit, in addition
to the ROM, RAM, multiple-function timers, serial I/O, A-D converter,
and so on.
Its strong points are the low power dissipation, the low supply voltage
and the small package.
APPLICATION
FEATURES
Control devices for general commercial equipment such as office
automation, office equipment, personal information equipment, and
so on.
Control devices for general industrial equipment such as
communication equipment, and so on.
●Number of basic instructions .................................................. 103
●Memory size
ROM ................................................. 124 Kbytes
RAM ................................................ 3968 bytes
●Instruction execution time
The fastest instruction at 12 MHz frequency ...................... 333 ns
●Single power supply ...................................................... 2.7–5.5 V
●Low power dissipation (At 3 V supply voltage, 12 MHz frequency)
............................................ 9 mW (Typ.)
41
42
44
43
45
46
47
49
48
50
51
52
53
56
55
54
58
57
61
40
62
39
63
38
64
37
65
36
66
35
67
34
68
33
69
32
70
31
M37735MHLXXXHP
71
30
72
29
73
28
74
27
75
26
76
25
77
24
20
19
18
17
16
14
15
13
12
11
10
8
9
5
7
6
21
4
80
3
22
2
23
79
1
78
P66/TB1 IN
P65/TB0 IN
P64 /INT2
P63 /INT1
P62 /INT0
P61/TA4 IN
P60/TA4OUT
P57/TA3 IN /KI 3
P56 /TA3 OUT/KI 2
P55/TA2 IN /KI 1
P54/TA2 OUT/KI 0
P53/TA1 IN
P52/TA1 OUT
P51/TA0 IN
P50/TA0OUT
P47
P46
P45
P44
P43
P85/CLK 1
P84/CTS1/RTS1
P83/TXD0
P82/RXD0/CLKS0
P81/CLK0
P80/CTS0/RTS0/CLKS1
VCC
AVCC
VREF
AVSS
VSS
P77/AN7/X CIN
P76/AN6/X COUT
P75/AN5 /ADTRG /TXD2
P74/AN4/R XD2
P73/AN3/CLK 2
P72/AN2/CTS2
P71/AN1
P70/AN0
P67/TB2 IN/ SUB
59
60
P86/R x D1
P87/T x D1
P00/CS0
P01/CS1
P02/CS2
P03/CS3
P04/CS4
P05/RSMP
P06/A 16
P07/A 17
P10/A 8/D 8
P11/A 9/D 9
P12/A 10/D10
P13/A 11/D11
P14/A 12/D12
P15/A 13/D13
P16/A 14/D14
P17/A 15/D15
P20/A 0/D 0
P21/A 1/D 1
PIN CONFIGURATION (TOP VIEW)
Outline 80P6D-A, 80P6Q-A
P22/A 2/D 2
P23/A 3/D 3
P24/A 4/D 4
P25/A 5/D 5
P26/A 6/D 6
P27/A 7/D 7
P30/WEL
P31/WEH
P32/ALE
P33/HLDA
VSS
E/RDE
XOUT
XIN
RESET
CNVSS
BYTE
P40/HOLD
P41/RDY
P42/ 1
MITSUBISHI MICROCOMPUTERS
Y
NAR
M37735MHLXXXHP
I
ge.
ion.
icat to chan
ecif
l sp ubject
a
in
af
es
not mits ar
li
is is
: Th metric
e
ic
Not e para
Som
IM
REL
P
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Reference
External data bus width
voltage input
selection input
VREF
BYTE
Data Bus(Even)
Data Bus(Odd)
P0(8)
Instruction Queue Buffer Q0(8)
P1(8)
Instruction Queue Buffer Q2(8)
Address Bus
Input/Output
port P1
Instruction Queue Buffer Q1(8)
AVCC
Instruction Register(8)
Data Buffer DBL(8)
Input/Output
port P0
Data Buffer DBH(8)
Incrementer/Decrementer(24)
(0V)
VSS
Program Counter PC(16)
Program Bank Register PG(8)
Input/Output
port P3
P2(8)
A-D Converter(10)
CNVss
Data Address Register DA(24)
P3(4)
(0V)
AVSS
Program Address Register PA(24)
Input/Output
port P2
Incrementer(24)
2
E
Input/Output
port P4
Input/Output
port P5
Input/Output
port P6
P4(8)
P5(8)
Timer TB0(16)
Timer TA0(16)
P6(8)
Timer TB1(16)
UART0(9)
Timer TB2(16)
Timer TA1(16)
Input/Output
port P7
P7(8)
3968 bytes
RAM
Accumulator A(16)
Input/Output
port P8
124 Kbytes
P8(8)
XCOUT
XCIN
Arithmetic Logic
Unit(16)
ROM
Clock Generating Circuit
Enable
output
Accumulatcr B(16)
Watchdog Timer
XCOUT
XCIN
Index Register X(16)
Timer TA4(16)
Stack Pointer S(16)
Timer TA2(16)
RESET
Direct Page Register DPR(16)
Index Register Y(16)
Clock input Clock output
XIN
XOUT
M37735MHLXXXHP BLOCK DIAGRAM
Reset input
Processor Status Register PS(11)
Timer TA3(16)
Input Butter Register IB(16)
UART1(9)
UART2(9)
VCC
Data Bank Register DT(8)
MITSUBISHI MICROCOMPUTERS
Y
NAR
I
ge.
ion.
icat to chan
ecif
l sp ubject
a
in
af
es
not mits ar
li
is is
: Th metric
e
ic
Not e para
Som
IM
REL
M37735MHLXXXHP
P
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
FUNCTIONS OF M37735MHLXXXHP
Parameter
Number of basic instructions
Instruction execution time
Memory size
Input/Output ports
Multi-function timers
ROM
RAM
P0 – P2, P4 – P8
P3
TA0, TA1, TA2, TA3, TA4
TB0, TB1, TB2
Serial I/O
A-D converter
Watchdog timer
Interrupts
Clock generating circuit
Supply voltage
Power dissipation
Input/Output characteristic
Memory expansion
Operating temperature range
Device structure
Package
Input/Output voltage
Output current
Functions
103
333 ns (the fastest instruction at external clock 12 MHz frequency)
124 Kbytes
3968 bytes
8-bit ✕ 8
4-bit ✕ 1
16-bit ✕ 5
16-bit ✕ 3
(UART or clock synchronous serial I/O) ✕ 3
10-bit ✕ 1 (8 channels)
12-bit ✕ 1
3 external types, 16 internal types
Each interrupt can be set to the priority level (0 – 7.)
2 circuits built-in (externally connected to a ceramic resonator or a
quartz-crystal oscillator)
2.7 – 5.5 V
9 mW (at 3 V supply voltage, external clock 12 MHz frequency)
22.5 mW (at 5 V supply voltage, external clock 12 MHz frequency)
5V
5 mA
Maximum 1 Mbytes
–40 to 85 °C
CMOS high-performance silicon gate process
80-pin plastic molded fine-pitch QFP (80P6D-A;0.5 mm lead pitch)
3
MITSUBISHI MICROCOMPUTERS
Y
NAR
M37735MHLXXXHP
I
ge.
ion.
icat to chan
ecif
l sp ubject
a
in
af
es
not mits ar
li
is is
: Th metric
e
ic
Not e para
Som
IM
REL
P
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
PIN DESCRIPTION
Pin
Vcc,
Vss
CNVss
CNVss input
Input
RESET
Reset input
Input
XIN
Clock input
Input
XOUT
Clock output
Enable output
Output
Output
External data
bus width
selection input
Analog power
source input
Reference
voltage input
I/O port P0
Input
E
BYTE
AVcc,
AVss
VREF
P00 – P07
Name
Input/Output
Power source
Apply 2.7 – 5.5 V to Vcc and 0 V to Vss.
This pin controls the processor mode. Connect to Vss for the single-chip mode and the memory
expansion mode, and to Vcc for the microprocessor mode.
When “L” level is applied to this pin, the microcomputer enters the reset state.
These are pins of main-clock generating circuit. Connect a ceramic resonator or a quartzcrystal oscillator between XIN and XOUT. When an external clock is used, the clock source should
be connected to the XIN pin, and the XOUT pin should be left open.
In the single-chip mode, this pin functions as the enable signal output pin which indicates the
access status in the internal bus.
In the memory expansion mode or the microprocessor mode, this pin functions as the RDE signal
output pin.
In the memory expansion mode or the microprocessor mode, this pin determines whether the
external data bus has an 8-bit width or a 16-bit width. The data bus has a 16-bit width when “L”
signal is input and an 8-bit width when “H” signal is input.
Power source input pin for the A-D converter. Externally connect AVcc to Vcc and AVss to Vss.
Input
This is reference voltage input pin for the A-D converter.
I/O
In the single-chip mode, port P0 becomes an 8-bit I/O port. An I/O direction register is available so
that each pin can be programmed for input or output. These ports are in the input mode when
reset.
In the memory expansion mode or the microprocessor mode, these pins output CS0 – CS4,
RSMP signals, and address (A16, A17).
In the single-chip mode, these pins have the same functions as port P0. When the BYTE pin is set
to “L” in the memory expansion mode or the microprocessor mode and external data bus has a
16-bit width, high-order data (D8 – D15) is input/output or an address (A8 – A15) is output. When
the BYTE pin is “H” and an external data bus has an 8-bit width, only address (A8 – A15) is output.
In the single-chip mode, these pins have the same functions as port P0. In the memory expansion
mode or the microprocessor mode, low-order data (D0 – D7) is input/output or an address
(A0 – A7) is output.
In the single-chip mode, these pins have the same function as port P0. In the memory expansion
mode or the microprocessor mode, WEL, WEH, ALE, and HLDA signals are output.
In the single-chip mode, these pins have the same functions as port P0. In the memory expansion
mode or the microprocessor mode, P40, P41, and P42 become HOLD and RDY input pins, and
clock φ 1 output pin, respectively.
Functions of the other pins are the same as in the single-chip mode. However, in the memory
expansion mode, P42 also functions as an I/O port.
In addition to having the same functions as port P0 in the single-chip mode, these pins also
function as I/O pins for timers A0 to A3 and input pins for key input interrupt input (KI0 – KI3).
In addition to having the same functions as port P0 in the single-chip mode, these pins also
function as I/O pins for timer A4, input pins for external interrupt input (INT0 – INT2) and input pins
for timers B0 to B2. P67 also functions as sub-clock φ SUB output pin.
In addition to having the same functions as port P0 in the single-chip mode, these pins function
as input pins for A-D converter. P72 to P75 also function as I/O pins for UART2. Additionally, P76
and P77 have the function as the output pin (XCOUT) and the input pin (XCIN) of the sub-clock
(32 kHz) oscillation circuit, respectively. When P76 and P77 are used as the XCOUT and XCIN pins,
connect a resonator or an oscillator between the both.
In addition to having the same functions as port P0 in the single-chip mode, these pins also
function as I/O pins for UART 0 and UART 1.
P10 – P17 I/O port P1
I/O
P20 – P27 I/O port P2
I/O
P30 – P33 I/O port P3
I/O
P40 – P47 I/O port P4
I/O
P50 – P57 I/O port P5
I/O
P60 – P67 I/O port P6
I/O
P70 – P77 I/O port P7
I/O
P80 – P87 I/O port P8
I/O
4
Functions
MITSUBISHI MICROCOMPUTERS
MI
I
L
E
N
ARY
M37735MHLXXXHP
e.
n.
atio chang
cific
o
spe bject t
l
a
fin
su
ot a its are
is n
m
This etric li
:
e
m
ic
Not e para
Som
PR
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
BASIC FUNCTION BLOCKS
ADDRESSING MODES
The M37735MHLXXXHP has the same functions as the
M37735MHBXXXFP except for the package and the reset circuit.
Refer to the section on the M37735MHBXXXFP.
The M37735MHLXXXHP has 28 powerful addressing modes. Refer
to the “7700 Family Software Manual” for the details.
MACHINE INSTRUCTION LIST
RESET CIRCUIT
_____
The microcomputer is released from the reset state when the RESET
pin is returned to “H” level after holding it at “L” level with the power
source voltage at 2.7 – 5.5 V. Program execution starts at the address
formed by setting address A23 – A16 to 0016, A15 – A 8 to the contents
of address FFFF16 , and A7 – A0 to the contents of address FFFE16.
Figure 1 shows an example of a reset circuit. When the stabilized
clock is input from the external to the main-clock oscillation circuit,
the reset input voltage must be 0.55 V or less when the power source
voltage reaches 2.7 V. When a resonator/oscillator is connected to
the main-clock oscillation circuit, change the reset input voltage from
“L” to “H” after the main-clock oscillation is fully stabilized.
The status of the internal registers during reset is the same as the
M37735MHBXXXFP’s.
The M37735MHLXXXHP has 103 machine instructions. Refer to the
“7700 Family Software Manual” for the details.
DATA REQUIRED FOR MASK ROM ORDERING
Please send the following data for mask orders.
(1) M37735MHLXXXHP mask ROM order confirmation form
(2) 80P6D, 80P6Q mark specification form
(3) ROM data (EPROM 3 sets)
Power on
2.7V
VCC
RESET
VCC
0V
RESET
0V
0.55V
Note. In this case, stabilized clock is input from the
external to the main-clock oscillation circuit.
Perform careful evalvation at the system design
level before using.
Fig. 1 Example of a reset circuit
5
MITSUBISHI MICROCOMPUTERS
Y
NAR
M37735MHLXXXHP
I
ge.
ion.
icat to chan
ecif
l sp ubject
a
in
af
es
not mits ar
li
is is
: Th metric
e
ic
Not e para
Som
IM
REL
P
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
ABSOLUTE MAXIMUM RATINGS
Symbol
Vcc
AVcc
VI
VI
VO
Pd
Topr
Tstg
Parameter
Power source voltage
Analog power source voltage
Input voltage RESET, CNVss, BYTE
Input voltage P00 – P07, P10 – P17, P20 – P27, P30 – P33,
P40 – P47, P50 – P57, P60 – P67, P70 – P77,
P80 – P87, VREF, XIN
Output voltage P00 – P07, P10 – P17, P20 – P27, P30 – P33,
P40 – P47, P50 – P57, P60 – P67, P70 – P77,
P80 – P87, XOUT, E
Power dissipation
Operating temperature
Storage temperature
Conditions
Ratings
–0.3 to +7
–0.3 to +7
–0.3 to +12
Unit
V
V
V
–0.3 to Vcc + 0.3
V
–0.3 to Vcc + 0.3
V
200
–40 to +85
–65 to +150
mW
°C
°C
Ta = 25 °C
RECOMMENDED OPERATING CONDITIONS (Vcc = 2.7 – 5.5 V, Ta = –40 to +85 °C, unless otherwise noted)
Symbol
Vcc
AVcc
Vss
AVss
VIH
VIH
VIH
VIL
VIL
VIL
IOH(peak)
IOH(avg)
IOL(peak)
IOL(peak)
IOL(avg)
IOL(avg)
f(XIN)
f(XCIN)
Parameter
f(XIN) : Operating
f(XIN) : Stopped, f(XCIN) = 32.768 kHz
Analog power source voltage
Power source voltage
Analog power source voltage
High-level input voltage P00 – P07, P30 – P33, P40 – P47, P50 – P57, P60 – P67, P70 – P77,
P80 – P87, XIN, RESET, CNVss, BYTE, XCIN (Note 3)
High-level input voltage P10 – P17, P20 – P27 (in single-chip mode)
High-level input voltage P10 – P17, P20 – P27
(in memory expansion mode and microprocessor mode)
Low-level input voltage P00 – P07, P30 – P33, P40 – P47, P50 – P57, P60 – P67, P70 – P77,
P80 – P87, XIN, RESET, CNVss, BYTE, XCIN (Note 3)
Low-level input voltage P10 – P17, P20 – P27 (in single-chip mode)
Low-level input voltage P10 – P17, P20 – P27
(in memory expansion mode and microprocessor mode)
High-level peak output current P00 – P07, P10– P17, P20 – P27, P30 – P33,
P40 – P47, P50 – P57, P60 – P67, P70 – P77,
P80 – P87
High-level average output current P00 – P07, P10 – P17, P20 – P27, P30 – P33,
P40 – P47, P50 – P57, P60 – P67, P70 – P77,
P80 – P87
Low-level peak output current P00 – P07, P10 – P17, P20 – P27, P30 – P33,
P40 – P43, P54 – P57, P60 – P67, P70 – P77,
P80 – P87
Low-level peak output current P44 – P47, P50 – P53
Low-level average output current P00 – P07, P10 – P17, P20 – P27, P30 – P33,
P40 – P43, P54 – P57, P60 – P67, P70 – P77,
P80 – P87
Low-level average output current P44 – P47, P50 – P53
Main-clock oscillation frequency (Note 4)
Sub-clock oscillation frequency
Power source voltage
Min.
2.7
2.7
Limits
Typ.
Max.
5.5
5.5
Vcc
0
0
Unit
V
V
V
V
0.8 Vcc
Vcc
V
0.8 Vcc
Vcc
V
0.5 Vcc
Vcc
V
0
0.2Vcc
V
0
0.2Vcc
V
0
0.16Vcc
V
–10
mA
–5
mA
10
mA
16
mA
5
mA
12
12
50
mA
MHz
kHz
32.768
Notes 1. Average output current is the average value of a 100 ms interval.
2. The sum of IOL(peak) for ports P0, P1, P2, P3, and P8 must be 80 mA or less, the sum of IOH(peak) for ports P0, P1, P2, P3, and P8 must
be 80 mA or less, the sum of IOL(peak) for ports P4, P5, P6, and P7 must be 100 mA or less, and the sum of IOH(peak) for ports P4, P5,
P6, and P7 must be 80 mA or less.
3. Limits VIH and VIL for XCIN are applied when the sub clock external input selection bit = “1”.
4. The maximum value of f(XIN) = 6 MHz when the main clock division selection bit = “1”.
6
MITSUBISHI MICROCOMPUTERS
Y
NAR
M37735MHLXXXHP
I
ge.
ion.
icat to chan
ecif
l sp ubject
a
in
af
es
not mits ar
li
is is
: Th metric
e
ic
Not e para
Som
IM
REL
P
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
ELECTRICAL CHARACTERISTICS (Vcc = 5 V, Vss = 0 V, Ta = –40 to +85 °C, f(XIN) = 12 MHz, unless otherwise noted)
Symbol
Parameter
VOH
High-level output voltage P00 – P07, P10 – P17, P20 – P27, P33,
P40 – P47, P50 – P57, P60 – P67, P70 – P77,
P80 – P87
High-level output voltage P00 – P07, P10 – P17, P20 – P27, P33
VOH
High-level output voltage P30 – P32
VOH
High-level output voltage E
VOL
Low-level output voltage P00 – P07, P10 – P17, P20 – P27, P33,
P40 – P43, P54 – P57, P60 – P67, P70 – P77,
P80 – P87
VOH
VOL
Low-level output voltage P44 – P47, P50 – P53
VOL
Low-level output voltage P00 – P07, P10 – P17, P20 – P27, P33
VOL
Low-level output voltage P30 – P32
VOL
Low-level output voltage E
VT+ – VT–
Hysteresis HOLD, RDY, TA0IN – TA4IN, TB0IN – TB2IN,
INT0 – INT2, ADTRG, CTS0, CTS1, CTS2, CLK0,
CLK1, CLK2, KI0 – KI3
VT+ – VT–
Hysteresis RESET
VT+ – VT–
Hysteresis XIN
VT+ – VT–
Hysteresis XCIN (When external clock is input)
IIH
IIL
High-level input current P00 – P07, P10 – P17, P20 – P27, P30 – P33,
P40 – P47, P50 – P57, P60 – P67, P70 – P77,
P80 – P87, XIN, RESET, CNVss, BYTE
Low-level input current P00 – P07, P10 – P17, P20 – P27, P30 – P33,
P40 – P47, P50 – P53, P60, P61, P65 – P67,
P70 – P77, P80 – P87, XIN, RESET, CNVss, BYTE
Low-level input current P54 – P57, P62 – P64
Test conditions
VCC = 5 V, IOH = –10 mA
Limits
Typ.
Min.
Unit
Max.
3
VCC = 3 V, IOH = –1 mA
2.5
VCC = 5 V, IOH = –400 µA
VCC = 5 V, IOH = –10 mA
VCC = 5 V, IOH = –400 µA
VCC = 3 V, IOH = –1 mA
VCC = 5 V, IOH = –10 mA
VCC = 5 V, IOH = –400 µA
VCC = 3 V, IOH = –1 mA
4.7
3.1
4.8
2.6
3.4
4.8
2.6
V
V
V
V
2
VCC = 5 V, IOL = 10 mA
VCC = 3 V, IOL = 1 mA
0.5
VCC = 5 V, IOL = 16 mA
VCC = 3 V, IOL = 10 mA
VCC = 5 V, IOL = 2 mA
VCC = 5 V, IOL = 10 mA
VCC = 5 V, IOL = 2 mA
VCC = 3 V, IOL = 1 mA
VCC = 5 V, IOL = 10 mA
VCC = 5 V, IOL = 2 mA
VCC = 3 V, IOL = 1 mA
1.8
1.5
0.45
1.9
0.43
0.4
1.6
0.4
0.4
VCC = 5 V
0.4
1
VCC = 3 V
0.1
0.7
VCC = 5 V
VCC = 3 V
VCC = 5 V
VCC = 3 V
VCC = 5 V
VCC = 3 V
0.2
0.1
0.1
0.06
0.1
0.06
0.5
0.4
0.4
0.26
0.4
0.26
VCC = 5 V, VI = 5 V
5
VCC = 3 V, VI = 3 V
4
VCC = 5 V, VI = 0 V
–5
VCC = 3 V, VI = 0 V
–4
VI = 0 V,
VCC = 5 V
–5
transistor
VCC = 3 V
–4
VI = 0 V,
VCC = 5 V
–0.25
–0.5
–1.0
VCC = 3 V
–0.08
–0.18
–0.35
without a pull-up
IIL
with a pull-up
transistor
VRAM
RAM hold voltage
When clock is stopped.
2
V
V
V
V
V
V
V
V
V
µA
µA
µA
mA
V
7
MITSUBISHI MICROCOMPUTERS
Y
NAR
M37735MHLXXXHP
I
ge.
ion.
icat to chan
ecif
l sp ubject
a
in
af
es
not mits ar
li
is is
: Th metric
e
ic
Not e para
Som
IM
REL
P
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
ELECTRICAL CHARACTERISTICS (Vcc = 5 V, Vss = 0 V, Ta = –40 to +85 °C, unless otherwise noted)
Symbol
Parameter
Power source
current
ICC
Limits
Typ.
Max.
VCC = 5 V,
f(XIN) = 12 MHz (square waveform),
(f(f2) = 6 MHz),
f(XCIN) = 32.768 kHz,
in operating (Note 1)
4.5
9
mA
VCC = 3 V,
f(XIN) = 12 MHz (square waveform),
(f(f2) = 6 MHz),
f(XCIN) = 32.768 kHz,
in operating (Note 1)
3
6
mA
VCC = 3 V,
f(XIN) = 12 MHz (square waveform),
(f(f2) = 0.75 MHz),
f(XCIN) : Stopped,
in operating
0.4
0.8
mA
6
12
µA
30
60
µA
3
6
µA
1
µA
20
µA
Test conditions
Min.
When single-chip
mode, output pins
are open, and
other pins are VSS. VCC = 3 V,
f(XIN) = 12 MHz (square waveform),
f(XCIN) = 32.768 kHz,
when a WIT instruction is executed (Note 2)
VCC = 3 V,
f(XIN) : Stopped,
f(XCIN) = 32.768 kHz,
in operating (Note 3)
VCC = 3 V,
f(XIN) : Stopped,
f(XCIN) = 32.768 kHz,
when a WIT instruction is executed (Note 4)
Ta = 25 °C,
when clock is stopped
Ta = 85 °C,
when clock is stopped
Unit
Notes 1. This applies when the main clock external input selection bit = “1”, the main clock division selection bit = “0”, and the signal output stop
bit = “1”.
2. This applies when the main clock external input selection bit = “1” and the system clock stop bit at wait state = “1”.
3. This applies when CPU and the clock timer are operating with the sub clock (32.768 kHz) selected as the system clock.
4. This applies when the XCOUT drivability selection bit = “0” and the system clock stop bit at wait state = “1”.
A–D CONVERTER CHARACTERISTICS
(VCC = AVCC = 5 V, VSS = AVSS = 0 V, Ta = –40 to +85 °C, f(XIN) = 12 MHz, unless otherwise noted (Note))
Symbol
—
—
RLADDER
tCONV
VREF
VIA
Parameter
Resolution
Absolute accuracy
Ladder resistance
Conversion time
Reference voltage
Analog input voltage
Test conditions
VREF = VCC
VREF = VCC
VREF = VCC
Note. This applies when the main clock division selection bit = “0” and f(f2) = 6 MHz.
8
Min.
10
19.6
2.7
0
Limits
Typ.
Max.
10
±3
25
VCC
VREF
Unit
Bits
LSB
kΩ
µs
V
V
MITSUBISHI MICROCOMPUTERS
Y
NAR
M37735MHLXXXHP
I
ge.
ion.
icat to chan
ecif
l sp ubject
a
in
af
es
not mits ar
li
is is
: Th metric
e
ic
Not e para
Som
IM
REL
P
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
TIMING REQUIREMENTS (VCC = 2.7 – 5.5 V, VSS = 0 V, Ta = –40 to +85 °C, f(XIN) = 12 MHz, unless otherwise noted (Note 1))
Notes 1. This applies when the main clock division selection bit = “0” and f(f2) = 6 MHZ.
2. Input signal’s rise/fall time must be 100 ns or less, unless otherwise noted.
External clock input
Symbol
tc
tw(H)
tw(L)
tr
tf
Parameter
External clock input cycle time (Note 1)
External clock input high-level pulse width (Note 2)
External clock input low-level pulse width (Note 2)
External clock rise time
External clock fall time
Limits
Min.
83
33
33
Max.
15
15
Unit
ns
ns
ns
ns
ns
Notes 1. When the main clock division selection bit = “1”, the minimum value of tc = 166 ns.
2. When the main clock division selection bit = “1”, values of tw(H) / tc and tw(L) / tc must be set to values from 0.45 through 0.55.
Single-chip mode
Symbol
tsu(P0D–E)
tsu(P1D–E)
tsu(P2D–E)
tsu(P3D–E)
tsu(P4D–E)
tsu(P5D–E)
tsu(P6D–E)
tsu(P7D–E)
tsu(P8D–E)
th(E–P0D)
th(E–P1D)
th(E–P2D)
th(E–P3D)
th(E–P4D)
th(E–P5D)
th(E–P6D)
th(E–P7D)
th(E–P8D)
Parameter
Port P0 input setup time
Port P1 input setup time
Port P2 input setup time
Port P3 input setup time
Port P4 input setup time
Port P5 input setup time
Port P6 input setup time
Port P7 input setup time
Port P8 input setup time
Port P0 input hold time
Port P1 input hold time
Port P2 input hold time
Port P3 input hold time
Port P4 input hold time
Port P5 input hold time
Port P6 input hold time
Port P7 input hold time
Port P8 input hold time
Limits
Min.
200
200
200
200
200
200
200
200
200
0
0
0
0
0
0
0
0
0
Max.
Unit
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
Memory expansion mode and microprocessor mode
Symbol
tsu(D–RDE)
tsu(RDY– φ 1)
tsu(HOLD– φ 1)
th(RDE–D)
th( φ 1–RDY)
th( φ 1–HOLD)
Parameter
Data input setup time
RDY input setup time
HOLD input setup time
Data input hold time
RDY input hold time
HOLD input hold time
Limits
Min.
50
80
80
0
0
0
Max.
Unit
ns
ns
ns
ns
ns
ns
9
MITSUBISHI MICROCOMPUTERS
Y
NAR
M37735MHLXXXHP
I
ge.
ion.
icat to chan
ecif
l sp ubject
a
in
af
es
not mits ar
li
is is
: Th metric
e
ic
Not e para
Som
IM
REL
P
Timer A input
(Count input in event counter mode)
Symbol
tc(TA)
tw(TAH)
tw(TAL)
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Parameter
TAiIN input cycle time
TAiIN input high-level pulse width
TAiIN input low-level pulse width
Limits
Min.
250
125
125
Max.
Unit
ns
ns
ns
Timer A input (Gating input in timer mode)
Symbol
tc(TA)
tw(TAH)
tw(TAL)
Parameter
TAiIN input cycle time (Note)
TAiIN input high-level pulse width (Note)
TAiIN input low-level pulse width (Note)
Limits
Min.
666
333
333
Max.
Unit
ns
ns
ns
Note. Limits change depending on f(XIN). Refer to “DATA FORMULAS”.
Timer A input (External trigger input in one-shot pulse mode)
Symbol
t c(TA)
tw(TAH)
tw(TAL)
Parameter
TAiIN input cycle time (Note)
TAiIN input high-level pulse width
TAiIN input low-level pulse width
Limits
Min.
666
166
166
Max.
Unit
ns
ns
ns
Note. Limits change depending on f(XIN). Refer to “DATA FORMULAS”.
Timer A input (External trigger input in pulse width modulation mode)
Symbol
tw(TAH)
tw(TAL)
Parameter
TAiIN input high-level pulse width
TAiIN input low-level pulse width
Limits
Min.
166
166
Max.
Unit
ns
ns
Timer A input (Up-down input in event counter mode)
Symbol
tc(UP)
tw(UPH)
tw(UPL)
tsu(UP–TIN)
th(TIN–UP)
Parameter
TAiOUT input cycle time
TAiOUT input high-level pulse width
TAiOUT input low-level pulse width
TAiOUT input setup time
TAiOUT input hold time
Limits
Min.
3333
1666
1666
666
666
Max.
Unit
ns
ns
ns
ns
ns
Timer A input (Two-phase pulse input in event counter mode)
Symbol
tc(TA)
tsu(TAjIN–TAjOUT)
tsu(TAjOUT–TAjIN)
10
Parameter
TAjIN input cycle time
TAjIN input setup time
TAjOUT input setup time
Limits
Min.
2000
500
500
Max.
Unit
ns
ns
ns
MITSUBISHI MICROCOMPUTERS
Y
NAR
M37735MHLXXXHP
I
ge.
ion.
icat to chan
ecif
l sp ubject
a
in
af
es
not mits ar
li
is is
: Th metric
e
ic
Not e para
Som
IM
REL
P
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Timer B input (Count input in event counter mode)
Symbol
tc(TB)
tw(TBH)
tw(TBL)
tc(TB)
tw(TBH)
tw(TBL)
Parameter
TBiIN input cycle time (one edge count)
TBiIN input high-level pulse width (one edge count)
TBiIN input low-level pulse width (one edge count)
TBiIN input cycle time (both edges count)
TBiIN input high-level pulse width (both edges count)
TBiIN input low-level pulse width (both edges count)
Limits
Min.
250
125
125
500
250
250
Max.
Unit
ns
ns
ns
ns
ns
ns
Timer B input (Pulse period measurement mode)
Symbol
tc(TB)
tw(TBH)
tw(TBL)
Parameter
TBiIN input cycle time (Note)
TBiIN input high-level pulse width (Note)
TBiIN input low-level pulse width (Note)
Limits
Min.
666
333
333
Max.
Unit
ns
ns
ns
Note. Limits change depending on f(XIN). Refer to “DATA FORMULAS”.
Timer B input (Pulse width measurement mode)
Symbol
tc(TB)
tw(TBH)
tw(TBL)
Parameter
TBiIN input cycle time (Note)
TBiIN input high-level pulse width (Note)
TBiIN input low-level pulse width (Note)
Limits
Min.
666
333
333
Max.
Unit
ns
ns
ns
Note. Limits change depending on f(XIN). Refer to “DATA FORMULAS”.
A-D trigger input
Symbol
tc(AD)
tw(ADL)
Parameter
ADTRG input cycle time (minimum allowable trigger)
ADTRG input low-level pulse width
Limits
Min.
1333
166
Max.
Unit
ns
ns
Serial I/O
Symbol
tc(CK)
tw(CKH)
tw(CKL)
td(C–Q)
th(C–Q)
tsu(D–C)
th(C–D)
Parameter
CLKi input cycle time
CLKi input high-level pulse width
CLKi input low-level pulse width
TXDi output delay time
TXDi hold time
RXDi input setup time
RXDi input hold time
Limits
Min.
333
166
166
Max.
100
0
65
75
Unit
ns
ns
ns
ns
ns
ns
ns
External interrupt INTi input, key input interrupt KIi input
Symbol
tw(INH)
tw(INL)
tw(KIL)
Parameter
INTi input high-level pulse width
INTi input low-level pulse width
KIi input low-level pulse width
Limits
Min.
250
250
250
Max.
Unit
ns
ns
ns
11
MITSUBISHI MICROCOMPUTERS
Y
NAR
M37735MHLXXXHP
I
ge.
ion.
icat to chan
ecif
l sp ubject
a
in
af
es
not mits ar
li
is is
: Th metric
e
ic
Not e para
Som
IM
REL
P
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
DATA FORMULAS
Timer A input (Gating input in timer mode)
Symbol
Parameter
tc(TA)
TAiIN input cycle time
tw(TAH)
TAiIN input high-level pulse width
tw(TAL)
TAiIN input low-level pulse width
Limits
Min.
8 ✕ 109
2 • f(f2)
4 ✕ 109
2 • f(f2)
4 ✕ 109
2 • f(f2)
Max.
Unit
ns
ns
ns
Timer A input (External trigger input in one-shot pulse mode)
Symbol
tc(TA)
Parameter
TAiIN input cycle time
Limits
Min.
8 ✕ 109
2 • f(f2)
Max.
Unit
ns
Timer B input (In pulse period measurement mode or pulse width measurement mode)
Symbol
Parameter
tc(TB)
TBiIN input cycle time
tw(TBH)
TBiIN input high-level pulse width
tw(TBL)
TBiIN input low-level pulse width
Limits
Min.
8 ✕ 109
2 • f(f2)
4 ✕ 109
2 • f(f2)
4 ✕ 109
2 • f(f2)
Note. f(f2) represents the clock f2 frequency.
For the relation to the main clock and sub clock, refer to Table 10 in data sheet “M37735MHBXXXFP”.
12
Max.
Unit
ns
ns
ns
Y
NAR
MI
ELI
MITSUBISHI MICROCOMPUTERS
M37735MHLXXXHP
.
e
n.
atio chang
cific
o
spe bject t
l
a
fin
su
ot a its are
is n
his tric lim
T
:
e
m
ice
Not e para
Som
PR
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
SWITCHING CHARACTERISTICS
(VCC = 2.7 – 5.5 V, VSS = 0 V, Ta = –40 to +85°C, f(XIN) = 12 MHz, unless otherwise noted (Note))
Single-chip mode
Symbol
td(E–P0Q)
td(E–P1Q)
td(E–P2Q)
td(E–P3Q)
td(E–P4Q)
td(E–P5Q)
td(E–P6Q)
td(E–P7Q)
td(E–P8Q)
Parameter
Test conditions
Port P0 data output delay time
Port P1 data output delay time
Port P2 data output delay time
Port P3 data output delay time
Port P4 data output delay time
Port P5 data output delay time
Port P6 data output delay time
Port P7 data output delay time
Port P8 data output delay time
Fig. 2
Limits
Min.
Max.
300
300
300
300
300
300
300
300
300
Unit
ns
ns
ns
ns
ns
ns
ns
ns
ns
Note. This applies when the main clock division selection bit = “0” and f(f2) = 6 MHz.
P0
P1
P2
50 pF
P3
P4
P5
P6
P7
P8
1
E
Fig. 2 Measuring circuit for ports P0 – P8 and φ 1
13
MITSUBISHI MICROCOMPUTERS
Y
NAR
M37735MHLXXXHP
I
ge.
ion.
icat to chan
ecif
l sp ubject
a
in
af
es
not mits ar
li
is is
: Th metric
e
ic
Not e para
Som
IM
REL
P
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Memory expansion mode and microprocessor mode
(VCC = 2.7 – 5.5 V, VSS = 0 V, Ta = –40 to +85 °C, f(XIN) = 12 MHz, unless otherwise noted (Note 1))
Symbol
Parameter
td(CS–WE)
td(CS–RDE)
Chip-select output delay time
th(WE–CS)
th(RDE–CS)
Chip-select hold time
td(An–WE)
td(An–RDE)
Address output delay time
td(A–WE)
td(A–RDE)
Address output delay time
th(WE–An)
th(RDE–An)
Address hold time
tw(ALE)
ALE pulse width
tsu(A–ALE)
th(ALE–A)
Address output setup time
Address hold time
td(ALE–WE)
td(ALE–RDE)
ALE output delay time
td(WE–DQ)
th(WE–DQ)
Data output delay time
Data hold time
tw(WE)
WEL/WEH pulse width
tpxz(RDE–DZ)
tpzx(RDE–DZ)
Floating start delay time
Floating release delay time
tw(RDE)
RDE pulse width
td(RSMP–WE)
td(RSMP–RDE)
th( φ 1–RSMP)
td(WE– φ 1)
td(RDE– φ 1)
td( φ 1–HLDA)
Test
(Note 2)
Wait mode conditions
No wait
Wait 1
Wait 0
No wait
Wait 1
Wait 0
No wait
Wait 1
Wait 0
No wait
Wait 1
Wait 0
No wait
Wait 1
Wait 0
No wait
Wait 1
Wait 0
No wait
Wait 1
Wait 0
Fig. 2
Max.
No wait
Wait 1
Wait 0
Unit
20
ns
182
ns
4
ns
20
ns
182
ns
20
ns
162
ns
40
ns
40
ns
123
ns
10
ns
93
ns
9
ns
40
ns
4
ns
40
131
ns
ns
ns
ns
298
ns
40
90
53
128
ns
ns
ns
295
ns
25
ns
RSMP hold time
0
ns
φ 1 output delay time
0
10
No wait
Wait 1
Wait 0
RSMP output delay time
HLDA output delay time
Notes 1. This applies when the main clock division selection bit = “0” and f(f2) = 6 MHz.
2. No wait : Wait bit = “1”.
Wait 1 : The external memory area is accessed with wait bit = “0” and wait selection bit = “1”.
Wait 0 : The external memory area is accessed with wait bit = “0” and wait selection bit = “0”.
14
Limits
Min.
30
ns
120
ns
MITSUBISHI MICROCOMPUTERS
Y
NAR
M37735MHLXXXHP
I
ge.
ion.
icat to chan
ecif
l sp ubject
a
in
af
es
not mits ar
li
is is
: Th metric
e
ic
Not e para
Som
IM
REL
P
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Bus timing data formulas (VCC = 2.7 – 5.5V, VSS = 0 V, Ta = –40 to +85 °C, f(XIN) = 12 MHz (Max.), unless otherwise noted (Note1))
Symbol
Parameter
td(CS–WE)
td(CS–RDE)
Chip-select output delay time
th(WE–CS)
th(RDE–CS)
Chip-select hold time
td(An–WE)
td(An–RDE)
Wait 0
Address output delay time
Address output delay time
th(WE–An)
th(RDE–An)
Address hold time
No wait
Wait 1
Wait 0
ALE pulse width
No wait
Wait 1
Wait 0
tsu(A–ALE)
Address output setup time
No wait
Wait 1
Wait 0
th(ALE–A)
Address hold time
No wait
Wait 1
ALE output delay time
td(WE–DQ)
Data output delay time
th(WE–DQ)
Data hold time
tw(WE)
WEL/WEH pulse width
tpxz(RDE–DZ)
1 ✕ 109
2 • f(f2)
3 ✕ 109
2 • f(f2)
1 ✕ 109
2 • f(f2)
3 ✕ 109
2 • f(f2)
1 ✕ 109
2 • f(f2)
1 ✕ 109
2 • f(f2)
2 ✕ 109
2 • f(f2)
1 ✕ 109
2 • f(f2)
2 ✕ 109
2 • f(f2)
Floating release delay time
tw(RDE)
RDE pulse width
ns
ns
– 63
ns
– 68
ns
– 63
ns
– 88
ns
– 43
ns
– 43
ns
– 43
ns
– 73
ns
– 73
ns
9
1 ✕ 10
2 • f(f2)
Unit
ns
ns
No wait
Wait 1
– 43
ns
ns
4
Wait 0
1 ✕ 10
2 • f(f2)
No wait
1 ✕ 109
2 • f(f2)
2 ✕ 109
2 • f(f2)
4 ✕ 109
2 • f(f2)
9
– 43
ns
90
Wait 1
Wait 0
ns
– 35
ns
– 35
ns
10
No wait
Wait 1
Wait 0
1 ✕ 109
2 • f(f2)
2 ✕ 109
2 • f(f2)
4 ✕ 109
2 • f(f2)
1 ✕ 109
2 • f(f2)
0
ns
– 43
Floating start delay time
tpzx(RDE–DZ)
Max.
9
Wait 0
td(ALE–WE)
td(ALE–RDE)
Limits
Min.
1 ✕ 109
– 63
2 • f(f2)
9
3 ✕ 10
– 68
2 • f(f2)
4
No wait
Wait 1
Wait 0
td(A–WE)
td(A–RDE)
tw(ALE)
Wait mode
No wait
Wait 1
ns
– 30
ns
– 38
ns
– 38
ns
td(RSMP–WE)
– 58
RSMP output delay time
td(RSMP–RDE)
th( φ 1–RSMP) RSMP hold time
td(WE– φ 1)
φ 1 output delay time
0
td(RDE– φ 1)
Notes 1. This applies when the main clock division selection bit = “0”.
2. f(f2) represents the clock f2 frequency.
For the relation to the main clock and sub clock, refer to Table 10 in data sheet “M37735MHBXXXFP”.
ns
ns
30
ns
15
MITSUBISHI MICROCOMPUTERS
Y
NAR
M37735MHLXXXHP
I
ge.
ion.
icat to chan
ecif
l sp ubject
a
in
af
es
not mits ar
li
is is
: Th metric
e
ic
Not e para
Som
IM
REL
P
TIMING DIAGRAM
Single-chip mode
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
tr
tf
tw(H)
tc
XIN
E
td(E–P0Q)
Port P0 output
tsu(P0D–E)
th(E–P0D)
Port P0 input
td(E–P1Q)
Port P1 output
tsu(P1D–E)
th(E–P1D)
Port P1 input
td(E–P2Q)
Port P2 output
tsu(P2D–E)
th(E–P2D)
Port P2 input
td(E–P3Q)
Port P3 output
tsu(P3D–E)
th(E–P3D)
Port P3 input
td(E–P4Q)
Port P4 output
tsu(P4D–E)
th(E–P4D)
Port P4 input
td(E–P5Q)
Port P5 output
tsu(P5D–E)
th(E–P5D)
Port P5 input
td(E–P6Q)
Port P6 output
tsu(P6D–E)
th(E–P6D)
Port P6 input
td(E–P7Q)
Port P7 output
tsu(P7D–E)
th(E–P7D)
Port P7 input
td(E–P8Q)
Port P8 output
tsu(P8D–E)
Port P8 input
16
th(E–P8D)
tw(L)
MITSUBISHI MICROCOMPUTERS
RY
A
IMIN
M37735MHLXXXHP
e.
n.
atio chang
cific
o
spe bject t
l
a
fin
su
ot a its are
is n
m
This etric li
:
e
m
ic
Not e para
Som
REL
P
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
tc(TA)
tw(TAH)
TAiIN input
tw(TAL)
tc(UP)
tw(UPH)
TAiOUT input
tw(UPL)
In event count mode
TAiOUT input
(Up-down input)
TAiIN input
(when count by falling)
TAiIN input
(when count by rising)
th(TIN–UP)
tsu(UP–TIN)
In event counter mode
(When two-phase pulse input is selected)
tc (TA)
TAjIN input
tsu(TAjIN–TAjOUT)
tsu(TAjIN–TAjOUT)
tsu(TAjOUT–TAjIN)
TAjOUT input
tsu(TAjOUT–TAjIN)
tc(TB)
tw(TBH)
TBiIN input
tw(TBL)
17
MITSUBISHI MICROCOMPUTERS
Y
NAR
M37735MHLXXXHP
I
ge.
ion.
icat to chan
ecif
l sp ubject
a
in
af
es
not mits ar
li
is is
: Th metric
e
ic
Not e para
Som
IM
REL
P
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
tc(AD)
tw(ADL)
ADTRG input
tc(CK)
tw(CKH)
CLKi
tw(CKL)
th(C–Q)
TxDi
td(C–Q)
tsu(D–C)
RxDi
tw(INL)
INTi input
Kli input
18
tw(INH)
tw(KNL)
th(C–D)
MITSUBISHI MICROCOMPUTERS
Y
NAR
M37735MHLXXXHP
I
ge.
ion.
icat to chan
ecif
l sp ubject
a
in
af
es
not mits ar
li
is is
: Th metric
e
ic
Not e para
Som
IM
REL
P
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Memory expansion and microprocessor mode
(When wait bit = “1”)
φ1
WEL
WEH
RDE
RDY input
tsu(RDY– φ1) th( φ1–RDY)
(When wait bit = “0”)
φ1
WEL
WEH
RDE
RDY input
tsu(RDY– φ1) th( φ1–RDY)
(When wait bit = “1” or “0” in common)
φ1
tsu(HOLD– φ1)
th( φ1–HOLD)
HOLD input
td( φ1–HLDA)
td( φ1–HLDA)
HLDA output
Test conditions
• VCC = 2.7 – 5.5 V
• Input timing voltage : V IL = 0.2VCC, VIH = 0.8V CC
• Output timing voltage : V OL = 0.8 V, VOH = 2.0 V
19
MITSUBISHI MICROCOMPUTERS
Y
NAR
M37735MHLXXXHP
I
ge.
ion.
icat to chan
ecif
l sp ubject
a
in
af
es
not mits ar
li
is is
: Th metric
e
ic
Not e para
Som
IM
REL
P
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Memory expansion and m icroprocessor mode
(No wait : When wait bit = “1”)
tw(L)
tw(H)
tf
tr
tc
XIN
φ1
td(WE– φ1)
td(WE– φ1)
td(RDE– φ1)
td(RDE– φ1)
CS0 – CS4
t d(CS–WE)
td(CS–RDE)
th(WE –CS)
An
th(RDE– CS)
Address
Address
td(An–WE)
tw(ALE)
Address
td(An–RDE )
td(ALE –WE)
th(RDE –An)
th(WE –An)
ALE
td(ALE –RDE)
th(ALE –A)
tsu(A–ALE)
th(WE –DQ)
Am/Dm
Address
Data
td(WE–DQ)
tpxz(RDE –DZ)
tpzx(RDE –DZ)
Address
Address
td(A–RDE)
t d(A–WE)
tw(WE)
th(RDE –D)
WEL, WEH
t su(D–RDE)
DmIN
Data
tw(RDE)
RDE
th( φ1–RSMP)
td(RSMP –WE)
RSMP
Test condition
• Vcc = 2.7 – 5.5 V
• Output timing voltage : V OL = 0.8 V, V OH = 2.0 V
• Data input Dm IN : VIL = 0.16 VCC, VIH = 0.5 VCC
20
td(RSMP –RDE)
MITSUBISHI MICROCOMPUTERS
Y
NAR
M37735MHLXXXHP
I
ge.
ion.
icat to chan
ecif
l sp ubject
a
in
af
es
not mits ar
li
is is
: Th metric
e
ic
Not e para
Som
IM
REL
P
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Memory expansion and m icroprocessor mode
(Wait 1 : The external area is accessed when wait bit = “0” and wait selection bit = “1”.)
tw(L)
tw(H)
tf tr
tc
XIN
φ1
td(WE– φ1)
td(WE– φ1)
td(RDE– φ1)
td(RDE- φ1)
CS0 – CS4
th(WE–CS)
th(RDE–CS)
td(CS–RDE)
td(CS–WE)
An
Address
td(An–WE)
tw(ALE)
Address
th(RDE–An)
td(An–RDE)
th(WE-An)
td(ALE–WE)
ALE
th(ALE–A)
tsu(A–ALE)
Am/Dm
td(ALE–RDE)
tpxz(RDE–DZ)
th(WE–DQ)
Address
td(A–WE)
Data
td(WE–DQ)
Address
tpzx(RDE–DZ)
Address
td(A–RDE)
tw(WE)
th(RDE–D)
WEL, WEH
tsu(D–RDE)
DmIN
Data
tw(RDE)
RDE
th( φ1–RSMP)
RSMP
td(RSMP–WE)
td(RSMP–RDE)
Test condition
• Vcc = 2.7 – 5.5 V
• Output timing voltage : V OL = 0.8 V, V OH = 2.0 V
• Data input Dm IN : VIL = 0.16 VCC, VIH = 0.5 V CC
21
MITSUBISHI MICROCOMPUTERS
Y
NAR
M37735MHLXXXHP
I
ge.
ion.
icat to chan
ecif
l sp ubject
a
in
af
es
not mits ar
li
is is
: Th metric
e
ic
Not e para
Som
IM
REL
P
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Memory expansion and microprocessor mode
(Wait 0 : The external memory are is accessed when wait bit = “0” and wait selection bit = “0”.)
tw(L)
tw(H)
tf tr
tc
X IN
φ1
td(WE– φ1)
td(WE– φ1)
td(RDE– φ1)
td(RDE– φ1)
CS0 – CS4
td(CS–WE)
th(WE–CS)
td(CS–RDE)
th(RDE–CS)
Address
An
Address
td(An–WE)
tw(ALE)
Address
td(An–RDE)
td(ALE–WE)
th(RDE–An)
th(WE–An)
ALE
td(ALE–RDE)
tsu(A–ALE)
Am/Dm
Address
th(ALE–A)
Data
th(WE–DQ)
tpxz(RDE–DZ)
tpzx(RDE–DZ)
Address
Address
td(WE–DQ)
td(A–WE)
td(A–RDE)
tw(WE)
WEL, WEH
tsu(D–RDE)
DmIN
Data
tw(RDE)
RDE
td(RSMP–WE)
th( φ1–RSMP)
RSMP
Test conditions
• Vcc = 2.7 – 5.5 V
• Output timing voltage : V OL = 0.8 V, V OH = 2.0 V
• Data input Dm IN : VIL = 0.16 VCC, VIH = 0.5 V CC
22
td(RSMP–RDE)
th(RDE–D)
Y
NAR
I
ge.
ion.
icat to chan
ecif
l sp ubject
a
in
af
es
not mits ar
li
is is
: Th metric
e
ic
Not e para
Som
IM
REL
MITSUBISHI MICROCOMPUTERS
M37735MHLXXXHP
P
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
PACKAGE OUTLINE
23
MITSUBISHI MICROCOMPUTERS
Y
AR
N
I
LIM
E
R
P
M37735MHLXXXHP
e.
n.
atio chang
cific
o
spe bject t
l
a
fin
su
ot a its are
is n
m
This etric li
:
e
m
ic
Not e para
Som
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
GZZ–SH00–43B<68A0>
Mask ROM number
7700 FAMILY MASK ROM ORDER CONFIRMATION FORM
SINGLE-CHIP 16-BIT MICROCOMPUTER
M37735MHLXXXHP
MITSUBISHI ELECTRIC
Receipt
Date:
Section head Supervisor
signature
signature
TEL
(
Company
name
Customer
Date
issued
)
Date:
Issuance
signatures
Note : Please fill in all items marked
Responsible
officer
Supervisor
1. Confirmation
Specify the name of the product being ordered.
Three sets of EPROMs are required for each pattern (Check @ in the appropriate box).
If at least two of the three sets of EPROMs submitted contain the identical data, we will produce masks based on this data.
We shall assume the responsibility for errors only if the mask ROM data on the products we produce differ from this data.
Thus, the customer must be especially careful in verifying the data contained in the EPROMs submitted.
(hexadecimal notation)
Checksum code for entire EPROM areas
EPROM Type :
(1) Set “FF16 ” in the shaded area.
27C201
(2) Address 016 to 1016 are the area for storing the data on
model designation and options.This area must be written
with the data shown below.
Details for option data are given next in the section
describing the STP instruction option.
Address and data are written in hexadecimal notation.
00000
00010
20000
128K
DATA
3FFFF
4D
33
37
37
33
35
4D
48
Address
0
1
2
3
4
5
6
7
4C
FF
FF
FF
FF
FF
FF
FF
Address
Address
Option data 10
8
9
A
B
C
D
E
F
2. STP instruction option
One of the following sets of data should be written to the option data address (1016) of the EPROM you have ordered.
Check @ in the appropriate box.
STP instruction enable
STP instruction disable
0116
0016
Address 1016
Address 1016
3. Mark specification
Mark specification must be submitted using the correct form for the type of package being ordered fill out the appropriate
80P6D Mark Specification Form (for M37735MHLXXXHP) and attach to the Mask ROM Order Confirmation Form.
4. Comments
24
RY
A
N
IMI
L
E
PR
ge.
ion.
icat to chan
ecif
l sp ubject
a
in
af
es
not mits ar
li
is is
: Th metric
e
ic
Not e para
Som
MITSUBISHI MICROCOMPUTERS
M37735MHLXXXHP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
25
Y
NAR
I
ge.
ion.
icat to chan
ecif
l sp ubject
a
in
af
es
not mits ar
li
is is
: Th metric
e
ic
Not e para
Som
IM
REL
MITSUBISHI MICROCOMPUTERS
M37735MHLXXXHP
P
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Keep safety first in your circuit designs!
¡ Mitsubishi Electric Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with
semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of
substitutive, auxiliary circuits, (ii) use of non-flammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
¡ These materials are intended as a reference to assist our customers in the selection of the Mitsubishi semiconductor product best suited to the customer’s application; they do not convey any license under any
intellectual property rights, or any other rights, belonging to Mitsubishi Electric Corporation or a third party.
¡ Mitsubishi Electric Corporation assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts or circuit application examples
contained in these materials.
¡ All information contained in these materials, including product data, diagrams and charts, represent information on products at the time of publication of these materials, and are subject to change by Mitsubishi
Electric Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor
product distributor for the latest product information before purchasing a product listed herein.
¡ Mitsubishi Electric Corporation semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact
Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for
transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
¡ The prior written approval of Mitsubishi Electric Corporation is necessary to reprint or reproduce in whole or in part these materials.
¡ If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the
approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
¡ Please contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor for further details on these materials or the products contained therein.
© 1996 MITSUBISHI ELECTRIC CORP.
H-LF424-A KI-9605 Printed in Japan (ROD) 2
New publication, effective May. 1996.
Specifications subject to change without notice.
REVISION DESCRIPTION LIST
Rev.
No.
M37735MHLXXXHP Datasheet
Rev.
date
Revision Description
1.00
First Edition
970414
1.01
The following are added:
980421
• MASK ROM ORDER CONFIRMATION FORM
• MARK SPECIFICATION FORM
2.00
The following are revised:
Page
Revised Version
Outline 80P6D-A
Outline 80P6D-A, 80P6Q-A
The M37735MHLXXXHP has 28 powerful
addressing modes. Refer to the MITSUBISHI
SEMICONDUCTORS DATA BOOK SINGLECHIP 16-BIT MICROCOMPUTERS for the details
of each addressing mode.
The M37735MHLXXXHP has 28 powerful
addressing modes. Refer to the “7700 Family
Software Manual” for the details.
P1
PIN CONFIGURATION
(TOP VIEW)
P5
Right column
Line 2
980731
Previous Version
MACHINE INSTRUCTION LIST
The M37735MHLXXXHP has 103 machine
instructions. Refer to the MITSUBISHI
SEMICONDUCTORS DATA BOOK SINGLECHIP 16-BIT MICROCOMPUTERS for details.
Line 10
P9
Memory expansion mode and
microprocessor
mode
(2) 80P6D mark specification form
MACHINE INSTRUCTION LIST
The M37735MHLXXXHP has 103 machine
instructions. Refer to the “7700 Family Software
Manual” for the details.
(2) 80P6D, 80P6Q mark specification form
Previous Version
Symbol
tsu (D–RDE)
Parameter
Data input setup time
Limits
Min.
Max.
80
Unit
ns
Revised Version
Symbol
tsu (D–RDE)
Parameter
Data input setup time
(1)
Limits
Min.
50
Max.
Unit
ns