DESCRIPTION FEATURES APPLICATION BLOCK DIAGRAM

PT16517
1/4, 1/3-Duty General-Purpose
LCD Display Driver
DESCRIPTION
The PT16517 is the 1/4 duty and 1/3 duty
general-purpose microprocessor-controlled LCD driver
that can be used in applications such as frequency
display in products with electronic tuning. In addition to
being able to drive up to 280 segments directly, the
PT16517 can also control up to 8 general-purpose
output ports. Because it has the PWM output of a
maximum of 6 ch, the brightness control of the LED
backlight of RGB can be done. Incorporation of an
oscillation circuit helps to reduce the number of
external resistors and capacitors required.
FEATURES
 Switching between 1/2 bias and 1/3 bias drive
techniques under serial data control.
When 1/4-duty: Capable of driving up to
280 segments
When 1/3-duty: Capable of driving up to
213 segments
 Serial data input supports serial format
communication with the system controller
(Support 3.3V and 5V operation).
 Serial data control of the power-saving mode
based backup function and the all segments
forced off function.
 Serial data control of switching between the
segment output port and general-purpose output
port function.(Support for up to 8 general-purpose
output ports)
 Support for the PWM output function of a
maximum of 6 ch (It can output from the
general-purpose output port).
 Support for clock output function of 1ch (It can
output from the general-purpose output port).
 Serial data control of the frame frequency of the
common and segment output waveforms.
 Serial data control of switching between the
internal oscillator operating mode and external
clock operating mode.
 High generality, since display data is displayed
directly without the intervention of a decoder
circuit.
 Built-in display contrast adjustment circuit.
 The INH pin allows the display to be forced to the
off state.
 Incorporation of an oscillator circuit (Incorporation
of resistor and capacitor for an oscillation).
APPLICATION
 Car Audio
 Set-Top Box
 Electronic Equipment with LCD Display.
BLOCK DIAGRAM
Tel: 886-66296288‧Fax: 886-29174598‧ http://www.princeton.com.tw‧2F, No. 233-1, Baociao Rd., Sindian Dist., New Taipei City 23145, Taiwan
PT16517
1. APPLICATION CIRCUIT
V1.0
3
October 2014
PT16517
2. ORDER INFORMATION
Valid Part Number
Package Type
Top Code
PT16517-LQ
80-PIN, LQFP
PT16517-LQ
3. PIN CONFIGURATION
V1.0
4
October 2014
PT16517
4. PIN DESCRIPTION
Pin Name
I/O
Active
Handling
when unused
S1/P1 to S8/P8
S9 to S66
S68,S70-71
O
-
OPEN
COM1 to
COM3
COM4/S67
O
-
OPEN
S69/OSCI
I/O
-
OPEN
CE
CL
DI
I
I
I
H
/INH
I
L
GND
VDD
-
-
-
VSS
-
-
-
V1.0
GND
-
Function
Pin No.
Segment outputs for displaying the display data
transferred by serial data input. The S1/P1 to S8/P8
pins can be used as general-purpose output ports
under serial data control.
79, 80,
1 to 6
7 to 64
69,71 to 72
Common driver outputs The frame frequency is fo[Hz].
The COM4/S67 pin can be used as a segment output
in 1/3 duty.
Segment output. This pin can also be used as the
external clock input pin when the external clock
operating mode is selected by control data.
Serial data transfer inputs. Must be connected to the
controller.
CE: Chip enable
CL: Synchronization clock
DI: Transfer data
Display off control input
•/INH=low(VSS)….Display forced off S1/P1 to
S8/P8=low (VSS)
(These pins are forcibly set to the
general-purpose output port function
and held at the VSS level.)
S9 to S66, S68, S70, S71=low(VSS)
COM1 to COM3= low(VSS)
COM4/S67=low(VSS)
S69/OSCI=low(VSS)
(This pin is forcibly set to the segment
output port function and held at the
VSS level.)
Stops the internal oscillator. Inhibits
external clock input. Display contrast
adjustment circuit stopped.
•/INH=high(VDD)…Display on
Enables the internal oscillator circuit.
(Internal oscillator operating mode)
Enables external clock input.
(External clock operating mode)
Display contrast adjustment circuit
operation is enabled. However, serial
data transfer is possible when the
display is forced off.
Power supply pin. A power voltage of 4.5 to 6.3V must
be applied to this pin.
Ground pin. Must be connected to ground.
5
65 to 67 68
74
76
77
78
75
70
73
October 2014
PT16517
IMPORTANT NOTICE
Princeton Technology Corporation (PTC) reserves the right to make corrections, modifications, enhancements,
improvements, and other changes to its products and to discontinue any product without notice at any time.
PTC cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a PTC product. No
circuit patent licenses are implied.
Princeton Technology Corp.
2F, 233-1, Baociao Road,
Sindian Dist., New Taipei City 23145, Taiwan
Tel: 886-2-66296288
Fax: 886-2-29174598
http://www.princeton.com.tw
V1.0
41
October 2014