BRIDGE RECTIFIER GBJ15005 Thru GBJ1510 RoHS 15.0 Amps HOLE FOR NO. 6 SCREW .189(4.8) .173(4.4) FEATURES 1.193(30.3) 1.169(29.7) • UL Recognized • Current 15 Amps • Voltage Range 50V ~ 1000V • Glass passivated chip junction • High surge forward current capability • GBJ available in 6A, 8A, 10A, 15A, .150(3.8) .134(3.4) .800(20.3) .776(19.7) 20A, 25A, 35A and 50A .153(3.9) .165(4.2) .134(3.4) .150(3.8) .708(18.0) .669(17.0) .106(2.7) .096(2.3) .094(2.4) .078(2.0) MECHANICAL DATA • Molded plastic body (UL 94V-0 rated) • Mounting through hole for No. 6 screw • Mounting Torque: recommend 5Kg • cm • Polarity: As marked • Lead: solder plated .043(1.1) .035(0.9) .134(3.4) .122(3.1) DIA .441(11.2) .425(10.8) .228(5.8) .189(4.8) .402(10.2) .386(9.8) .303(7.7) .287(7.3) .031(0.8) .023(0.6) .303(7.7) .287(7.3) GBJ Dimensions in inches and (millimeters) MAXIMUM RATINGS & ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load For capactitive load, derate current by 20% Symbol GBJ 15005 GBJ 1501 GBJ 1502 GBJ 1504 GBJ 1506 GBJ 1508 GBJ 1510 Unit Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking Voltage VDC 50 100 200 400 600 800 1000 V Parameter Maximum Average Forward Rectified Current, @TC=100°C (with heat sink) Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) 2 Io (AV) 15 A IFSM 220 A 2 I t for fusing (t < 8.3ms), non-repetitive I t 2 200 AS Maximum Instantaneous Forward Voltage @7.5A VF 1.1 V Maximum DC Reverse Current at rated DC Blocking voltage Per Element IR 10 A Typical Thermal Resistance (Note) RqJC 1.5 °C/W Operating Temperature Range TJ -55 to + 150 °C TSTG -55 to + 150 °C Storage Temperature Range NOTE: Thermal Resistance from Junction to Case, with heat sink Page 1 of 2 C3GBJ15 2011.11.30 BRIDGE RECTIFIER GBJ15005 Thru GBJ1510 15.0 Amps RoHS RATING & CHARACTERISTIC CURVES FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT Sine wave heatsink Sine wave R-load with heatsink IFSM PE AK F OR WARD SURGE CURR ENT (A) AVERAGE FOR WARD CURR ENT (A) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE non-repetitive T J =25°C CASE TEMPERATURE (°C) NUMBER OF CYCLES AT 60Hz FIG.4-TYPICAL REVERSE CHARACTERISTICS I NS TA NTANE OUS R EVE RSE CURRENT ( uA) INSTAN TANEOUS F ORWA RD SU RGE CU RRENT ( A) FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD VOLTAGE (V) PERCENT OF PEAK REVERSE VOLTAGE (%) Page 2 of 2 C3GBJ15 2011.11.30