FILM RESISTORS MGHV SERIES: High Voltage Resistor INTRODUCTION RoHS ü INTRODUCTION MGHV Series resistors are designed for applications which could be subjected to high voltages. The metal glaze construction and excellent coating material makes this an ideal choice for high voltage applications. • High IR Epoxy coating • Metal Glazed Construction • High Surge Capability * * H dimension for bulk pack. If taped use taped dimensions Epoxy Coating - Light Blue SPECIFICATIONS Type Small Size MGHV50M MGHV25 MGHV50 MGHV100S MGHV100 MGHV200S MGHV200 MGHV300S L 6.3 + 9.0 + 9.0 + 11.5 + 11.5 + 15.5 + 0.5 0.5 0.5 1.0 1.0 1.0 2.3 3.2 4.0 4.0 4.5 5.0 D + 0.3 + 0.5 + 0.5 + 0.5 + 0.5 + 0.5 DIMENSION (mm) H 28 + 2.0 0.55 26 + 2.0 0.65 26 + 2.0 0.65 35 + 2.0 0.80 35 + 2.0 0.80 32 + 2.0 0.80 d + + + + + + 0.05 0.05 0.05 0.05 0.05 0.05 Standard Tape T-52 T-52 T-52 T-52 T-52 T-52 Qty / Pckg 5,000 3,000 2,500 2,500 2,500 1,000 Rating Ambient Temp = 70°C Operating Temp Range = -55°C ~ +175°C RATING Type Power Rating MGHV25 MGHV50M MGHV50 MGHV100S MGHV100 MGHV200S MGHV200 MGHV300S 0.25W 0.5W 0.5W 1W 1W 2W 2W 3W Max. Working Voltage 1600Vdc 1700Vdc 2000Vdc 2500Vdc 3000Vdc 3500Vdc 3500Vdc 3500Vdc Dielectric Max. Overload Withstanding Voltage Voltage 2000Vdc 500V 2200Vdc 500V 2500Vdc 700V 3500Vdc 700V 4000Vdc 1000V 4000Vdc 1000V 7500Vdc 1200V 7500Vdc 1200V Resistance Range 100K ~ 1G 100K ~ 1G 100K ~ 1G 100K ~ 1G 100K ~ 1G 100K ~ 1G 100K ~ 1G 100K ~ 1G Resistance Tolerance K = 5% J = 5% F = 1% T.C.R E12 + 200ppm / °C E24 + 100ppm / °C E24 PERFORMANCE SPECIFICATIONS Test Items Short time overload Moisture resistance Load life Insulation resistance Resistance to soldering heat Terminal strength Anti-surge characteristics Intermittant Overload Test Methods Rated Voltage X 2.5 or Max. overload Vol., whichever is lower, for 5sec. 40 °C + 2 °C, 90% ~ 95%RH,1000h 90 min [ON] 30min [OFF] 1000hours at rated voltage, 70 °C 90 min [ON] 30min [OFF] 500 + 50V DC During 1 min V-Block method 260 °C + 5 °C,10s + 1s or 350 °C + 10 °C, 3.5s + 0.5s Direct load for 10 sec. in the direction off the terminal leads. R > 100K : 8KV/10nF R < 100K : 10KV/10nF 2.5sec on/off 10 Cycle 4 Times RCWV for 10,000 Cycles (1sec on, 25 sec off) Specifications + (1.0% + 0.05¿) + (5.0% + 0.05¿) + (3.0% + 0.05¿) 10,000M ¿ Over + (1.0% + 0.05¿) Tensile: > 2.5kg Rmax. +10% no damage. = + (1% + 0.05¿) PART NUMBER EXAMPLE MGHV 50S R - 4M7 - J or 1 MGHV 200 R - 1M0 - F 100 T52 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C2CB06 FILM RESISTORS MGHV SERIES: High Voltage Resistor RoHS ü PERFORMANCE SPECIFICATIONS Power Graph 50 100 40 80 20 60 50 40 30 20 10 0 -60 1 1 2W, 3WS 40 1 1 1W, 2WS 1/2W, 1WS 1/4W, 1/2WS 30 1 20 1 10 0 25 50 75 100 Applied Load % of RCWV 1 Rated Load (%) Surface Temperature (°C) Surface Temp. Rise 1 1 1 1 1 1 -55 -40 -20 0 20 40 60 80 100 70 120 140 160 155 Ambient Temperature (°C) HIGH VOLTAGE SURGE TEST 10 discharges from a 10nF capacitor charged to Vmax: 12 discharges/min no evidence of flash over, mechanical damage, arching or, insulation breakdown. RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C2CB06