SURFACE MOUNT RESISTOR RoHS RMV Series: Anti-Surge SMD Resistor 1 ~ 1MΩ INTRODUCTION DIMENSIONS D RFE International, Inc. offers a wide range of chip resistors to meet your application requirements. They are made with metal glazed thick film on a high purity ceramic substrate which is overcoated for stability and protection. These resistors are AEC-Q200 qualified and are suitable for all applications (automotive, lighting, power, etc). • Standard Series See RM Series • Anti-Sulfur Thick Film see RMS Series • High Power Thick Film see RMH Series • Anti-Sulfur High Power see RMP Series • Thin Film see RMT Series • Fusible Resistors see RMF Series • Thick Film Array Chip see RCN Series • Metal Array Low-Resistance see LR Series Glass Passivation H W C L Max. Dimension (mm) Size Code L W H C D RMV06 (0603) 1.60±0.20 0.80±0.15 0.40±0.10 0.20±0.10 0.20±0.10 RMV10 (0805) 2.00±0.20 1.25±0.15 0.50±0.15 0.30±0.15 0.40±0.15 RMV12 (1206) 3.05±0.10 1.60±0.20 0.55±0.15 0.40±0.20 0.50±0.20 RMV25 (1210) 3.05±0.10 2.50±0.20 0.55±0.15 0.50±0.20 0.50±0.20 RMV1W (2010) 5.00±0.20 2.50±0.20 0.55±0.10 0.60±0.20 0.60±0.20 PART NUMBER EXAMPLE RMV2W (2512) 6.30±0.20 3.20±0.20 0.55±0.10 0.60±0.20 0.60±0.20 RMV 10 R - 10K - J Series Size Code RESISTANCE CODE Tolerance Code Resistance Code Taped & Reeled Ohms 1.0 100 1.5K 15K 1.0 Meg Code 1R0 100R 1K5 15K 1M0 ELECTRICAL CHARACTERISTICS & RESISTANCE RANGE Code Size Rated Power at 70°C Max. Working Voltage Max. Overload Voltage Resistance Range T.C.R. (PPM/°C) D (±0.5%) F (±1%) – J (±5%) 1Ω ~ 9.9Ω RMV06 (0603) 0.10W 50V 100V ±200 – RMV10 (0805) 0.25W 150V 300V ±100 10Ω ~ 1MΩ 10Ω ~ 1MΩ 10Ω ~ 1MΩ RMV12 (1206) 0.50W 200V 400V ±100 10Ω ~ 1MΩ 10Ω ~ 1MΩ 10Ω ~ 1MΩ RMV25 (1210) 0.50W 200V 400V ±100 10Ω ~ 1MΩ 10Ω ~ 1MΩ 10Ω ~ 1MΩ RMV1W (2010) 1.0W 200V 400V ±100 10Ω ~ 1MΩ 10Ω ~ 1MΩ 10Ω ~ 1MΩ RMV2W (2512) 2.0W 300V 600V ±100 10Ω ~ 1MΩ 10Ω ~ 1MΩ 10Ω ~ 1MΩ SURGE PERFORMANCE CURVE Peak Power (W) 1000 100 Size 10 2512 2010 1210 1206 0805 0603 1 0.0001 0.0010 0.0100 0.1000 1.000 Surge Duration (Sec) Page 1 of 4 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C2BB01 2015.08.07 SURFACE MOUNT RESISTOR RoHS RMV Series: Anti-Surge SMD Resistor 1 ~ 1MΩ PERORMANCE CHARACTERISTICS Operating Temperature Range -55°C to +155°C Power Derating Curve Power Ratio (%) 100 80 1 60 40 155°C 1 20 1 0 -55 0 20 40 60 70 80 100 120 140 160 Ambient Temperature (°) Power rating or current rating is in the case based on continuous full-load at ambient temperature of 70ºC. For operation at ambient temperature in excess of 70ºC, the load should be derated in accordance with figure of derating Curve. CONTINUOUS PULSE POWER CURVE (TYPICAL) The typical continuous load numbers were obtained by repetitive application of rectangular pulses. The pulse period was set to the rated power rating of the resistor 70°C. The acceptance level was 1% from initial value. Pulse Power (Watts) 10,000 1,000 Size 100 2512 2010 1210 1206 0805 0603 10 1 0.0001 0.001 0.01 0.1 1 Pulse Duration Time (Sec.) Voltage Rating or Current Rating Resistance Range: >1Ω Rated Voltage: The resistor shall have a DC continuous working voltage or a RMS AC continuous working voltage at commercial-line frequency and wave form corresponding to the power rating, as determined formula as follows: E = √P x R E = Rated Voltage (V) P = Power Rating (W) R = Nominal Resistance (Ω) Operation and Storage Temperature Type Min Max Operation Temperature -55°C 70°C Soldering Profile +5 250 Peak: 250 0 ºC 230ºC or Higher 1 Storage Temperature 20°C 30°C Storage Humidity 30% 70°C 200 180ºC Pre Heating Zone 1 150 150ºC 90 ± 30 s 1 30 ± 10 s 100 Soldering Zone 1 50 Heating Time Page 2 of 4 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C2BB01 2015.08.07 SURFACE MOUNT RESISTOR RoHS RMV Series: Anti-Surge SMD Resistor 1 ~ 1MΩ TEST PROCEDURES & REQUIREMENTS Test Item Procedure Test Method Requirements Temperature JIS C 5201-1 Coefficient of Resistance (T.C.R.) Clause 4.8 -55°C ~ +155°C, 20°C is the reference temperature Refer to Ratings Short Time Overload General: 2.5 times RCWV or Max. Overload voltage for 5 seconds High Power: 2.5 times RCWV or Max. Overload voltage for 2 seconds ±1: ±(1.0%+0.05Ω) ±5: ±(2.0%+0.1Ω) JIS C 5201-1 Clause 4.13 +5 250 Peak: 250 0 ºC 230ºC or Higher 1 200 180ºC Pre Heating Zone 1 150 IR Reflow Sony SS-00254 1 100 150ºC 30 + 10 s Soldering Zone 1 50 ±1: ±(1.0%+0.05Ω) ±5: ±(2.0%+0.1Ω) 90 + 30 s Heating Time Leaching Sony SS-00254-9 260 ±5°C for 30 seconds > 95% Coverage Soldering Heat JIS C 5201-1 Clause 4.18 260 ±5°C for 10 seconds ±1: ±(0.5%+0.05Ω) ±5: ±(1.0%+0.05Ω) Temperature Cycling JIS C 5201-1 Clause 4.19 -55°C ~ +155°C, 5 cycles 0.1% ' 0.5% ' 1% ±(0.5%+0.05Ω) 2% ' 5% ±(1.0%+0.1Ω) Electric Iron Sony SS-00254-5 Preheating termperature: 350 ± 5°C Electric Iron preheating time: 3 +1/-0 sec. ±1: ±(0.5%+0.05Ω) ±5: ±(1.0%+0.05Ω) Resistance to Solvent JIS C 5201-1 Clause 4.29 The tested resistor be immersed into isopropyl alcoho of 20~25°C for 60 seconds. Then the resistor is left in the room for 48 hours. ±1: ±(0.5%+0.05Ω) ±5: ±(1.0%+0.05Ω) Load Life in Humidity JIS C 5201-1 Clause 4.24 40 ± 2°C, 90~95% R.H. or Max. working voltage for 1000 hours with 1.5 hrs “ON” and 0.5hr “OFF”. 0.1% ' 0.5% ' 1% ±(0.5%+0.05Ω) 2% ' 5% ±(3.0%+0.1Ω) Load Life (Endurance) JIS C 5201-1 Clause 4.25 70 ± 2°C, or Max. working voltage for 1000 hours with 1.5 hrs “ON” and 0.5hr “OFF”. 0.1% ' 0.5% ' 1% ±(1.0%+0.05Ω) 2% ' 5% ±(3.0%+0.1Ω) Terminal Bending Strength JIS C 5201-1 Clause 4.33 Bending once for 5 seconds D: RM Series 0402 ' 0603 ' 0805 = 5mm RM Series 1206 ' 1210 ' 1812 = 3mm RM Series 1218 ' 2010 ' 2512 ' 2030 = 2mm ±1: ±(1.0%+0.05Ω) ±5: ±(1.0%+0.05Ω) Insulation Resistance JIS C 5201-1 Clause 4.6 Max Overload Voltage for 1 min. ≥ 10G Page 3 of 4 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C2BB01 2015.08.07 SURFACE MOUNT RESISTOR RoHS RMV Series: Anti-Surge SMD Resistor 1 ~ 1MΩ PACKAGE & DIMENSION (mm) Size Package Qty 5K/reel A ΦB ΦC ΦD W ΦM 2.0±0.5 13.5±1.0 21±1.0 60±1.0 11.5±2.0 178±2.0 RMV06 (0603) 7” RMV10 (0805) 10” 10K/reel 2.0±0.5 13.5±1.0 21±1.0 100±1.0 11.5±2.0 254±2.0 RMV12 (1206) 13” 20K/reel 2.0±0.5 13.5±1.0 21±1.0 100±1.0 11.5±2.0 330±2.0 RMV25 (1210) 7” 5K/reel 2.0±0.5 13.5±1.0 21±1.0 60±1.0 11.5±2.0 178±2.0 7” 4K/reel 2.0±0.5 13.5±1.0 21±1.0 60±1.0 16.0±2.0 178±2.0 RMV1W (2010) RMV2W (2512) TAPING SPECIFICATION Paper Type (P= 2.0 ± 0.1) Size A B W E F G H T ØD RMV06(0603) 1.05±0.20 1.80±0.20 8.0±0.20 1.75±0.10 3.5±0.05 4.0±0.10 2.0±0.05 0.60±0.10 1.50±0.10 RMV10(0805) 1.55±0.20 2.30±0.20 8.0±0.20 1.75±0.10 3.5±0.05 4.0±0.10 2.0±0.05 0.75±0.10 1.50±0.10 RMV12(1206) 1.90±0.20 3.50±0.20 8.0±0.20 1.75±0.10 3.5±0.05 4.0±0.10 2.0±0.05 0.75±0.10 1.50±0.10 RMV25(1210) 2.85±0.20 3.50±0.20 8.0±0.20 1.75±0.10 3.5±0.05 4.0±0.10 2.0±0.05 0.75±0.10 1.50±0.10 Embossed Type (P= 4.0 ± 0.1) (2W.P= 8.0 ± 0.2) Size A B W E F G H T ØD ØD1 T1 RMV1W (2010) 2.80±0.20 5.60±0.20 12±0.10 1.75±0.10 5.5±0.05 4.0±0.10 2.0±0.05 0.23±0.10 1.50±0.10 1.50±0.10 0.85±0.15 RMV2W (2512) 3.30±0.20 4.60±0.20 12±0.10 1.75±0.10 5.5±0.05 4.0±0.10 2.0±0.05 0.23±0.10 1.50±0.10 1.50±0.10 0.85±0.15 Page 4 of 4 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C2BB01 2015.08.07