SURFACE MOUNT RESISTOR RoHS RMQ Series: Thick Film, High Voltage 100K~100M Ω INTRODUCTION DIMENSIONS RFE International, Inc. offers a wide range of chip resistors to meet your application requirements. They are made with metal glazed thick film on a high purity ceramic substrate which is overcoated for stability and protection. These resistors are suitable for all applications (automotive, lighting, power, etc). W C L Max. Dimension (mm) Size Code RMQ06 (0603) RMQ10 (0805) RMQ12 (1206) RMQ50 (2010) RMQ1W (2512) PART NUMBER EXAMPLE RMQ 10 R - 10K - J L W H C D 1.60 + 0.20 0.80 + 0.15 0.40 + 0.10 0.20 + 0.10 0.20 + 0.10 2.00 + 0.20 1.25 + 0.15 0.50 + 0.15 0.30 + 0.15 0.40 + 0.15 3.05 + 0.10 1.60 + 0.20 0.55 + 0.15 0.40 + 0.20 0.50 + 0.20 5.00 + 0.20 2.50 + 0.20 0.55 + 0.10 0.60 + 0.20 0.60 + 0.20 6.30 + 0.20 3.20 + 0.20 0.55 + 0.10 0.60 + 0.20 0.60 + 0.20 RESISTANCE CODE Tolerance Code Resistance Code Taped & Reeled Glass Passivation H • Lower & Ηigher values see additional RM Series • Anti-Sulfur Thick Film see RMS Series • High Power Thick Film see RMH Series • Anti-Sulfur High Power see RMP Series • Thin Film see RMT Series • Fusible Resistors see RMF Series • Thick Film Array Chip see RCN Series • Metal Array Low-Resistance see LR Series Series Size Code D Ohms 100K 1M 10M 100M Code 100K 1M0 10M 100M ELECTRICAL CHARACTERISTICS & RESISTANCE RANGE TYPE RMQ06 (0603) RMQ10 (0805) RMQ12 (1206) RMQ50 (2010) RMQ1W (2512) Rated Max Working Power at Voltage 70°C 0.10 W 0.125 W 0.25 W 0.50W 1.0W Max Overload Voltage 200V 400V 800V 2000V 3000V Resistance Range (Ω) F (+ 1%) Resistance Range (Ω) J (+ 5%) + 200 -- 100K ~ 22M + 100 100K ~ 10M -- + 200 -- 100K ~ 22M + 100 100K ~ 10M -- + 200 11M ~ 22M 100K ~ 100M + 100 100K ~ 10M -- + 200 11M ~ 22M 100K ~ 100M + 100 100K ~ 10M -- + 200 11M ~ 22M 100K ~ 100M + 100 100K ~ 10M -- T.C.R. (PPM/°C) 400V 800V 1600V 3000V 4000V PERORMANCE CHARACTERISTICS Operating Temperature Range -55°C to +155°C Power Derating Curve Power Ratio (%) 100 80 1 60 40 155°C 1 20 1 0 -55 0 20 40 60 70 80 100 120 140 160 Ambient Temperature (°C) Power rating or current rating is in the case based on continuous full-load at ambient temperature of 70ºC. For operation at ambient temperature in excess of 70ºC, the load should be derated in accordance with figure of derating Curve. Page 1 of 4 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C2BB01 2015.04.15 SURFACE MOUNT RESISTOR RoHS RMQ Series: Thick Film, High Voltage 100K~100M Ω Voltage Rating or Current Rating Resistance Range: >1Ω Rated Voltage: The resistor shall have a DC continuous working voltage or a RMS AC continuous working voltage at commercial-line frequency and wave form corresponding to the power rating, as determined formula as follows: E = √P x R E = Rated Voltage (V) P = Power Rating (W) R = Nominal Resistance (Ω) Operation and Storage Temperature TYPE Operation temperature MIN MAX -55ºC 70ºC Storage temperature 20ºC 30ºC Storage humidity 30% 70ºC TEST PROCEDURES & REQUIREMENTS Test Item Test Method Procedure Requirements Temperature Coefficient of Resistance (T.C.R) JIS C 5201-1 Clause 4.8 -55˚C ~ +155˚C, 20˚C is the reference temperature Refer to Ratings Short Time Overload JIS C 5201-1 Clause 4.13 General: 2 times working voltage or Max. Overload Voltage for 5 sec. +(1.0%+0.1Ω) +5 250 Peak: 250 0 ºC 230ºC or Higher 1 200 180ºC Pre Heating Zone 1 IR Reflow Sony SS-00254 150 150ºC +(1.0%+0.05Ω) 90 + 30 s 1 30 + 10 s 100 Soldering Zone 1 50 Heating Time Solderability IEC 60115-1 260 + 5˚C for 30 seconds > 95% Coverage Soldering Heat JIS C 5201-1 Clause 4.18 260 + 5˚C for 10 seconds +(1.0%+0.01Ω) Temperature Cycling JIS C 5201-1 Clause 4.19 -55˚C to +155 C, 5 cycles + (1.0% + 0.10Ω) Electric Iron Sony SS-00254-5 Preheating Temperature: 350 + 5 ˚C Electric Iron Preheating Time: 3+1/-0 sec. +1: +(1.0%+0.05Ω) +5: +(1.0%+0.05Ω) Resistance to Solvent JIS C 5201-1 Clause 4.29 The Tested Resistor to be immersed into isopropyl alcohol of +1: +(0.5%+0.05Ω ) 20 ~ 25˚C for 60secs. Then the resistor is left in the room +5: +(0.5%+0.05Ω) for 48hrs. Load Life in Humidity JIS C 5201-1 Clause 4.24 40 + 2˚C, 90 ~ 95% R.H. or Max. working Voltage for 1,000hrs with 1.5hrs "ON" and 0.5hr "OFF" + (5.0% + 0.01Ω) Load Life (Endurance) JIS C 5201-1 Clause 4.25 70 + 2˚C, or Max. working Voltage for 1,000hrs with 1.5hrs "ON" and 0.5hr "OFF" + (5.0% + 0.1Ω) Insulation Resistance JIS C 5201-1 Clause 4.6 Max Overload Voltage for 1 min. > 1,000MΩ Page 2 of 4 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C2BB01 2015.04.15 SURFACE MOUNT RESISTOR RoHS RMQ Series: Thick Film, High Voltage 100K~100M Ω PACKAGE & DIMENSION (mm) Package Q'ty Size RMQ06 (0603) RMQ10 (0805) RMQ12 (1206) RMQ50 (2010) RMQ1W (2512) A ɸB ɸC ɸD W ɸM 7" 5K/Reel 2.0 + 0.5 13.5 + 1.0 21 + 1.0 60 + 1.0 10" 10K/Reel 2.0 + 0.5 13.5 + 1.0 21 + 1.0 100 + 1.0 11.5 + 2.0 254 + 2.0 13" 20K/Reel 2.0 + 0.5 13.5 + 1.0 21 + 1.0 100 + 1.0 11.5 + 2.0 330 + 2.0 7" 4K/Reel 2.0 + 0.5 13.5 + 1.0 21 + 1.0 60 + 1.0 10" 8K/Reel 2.0 + 0.8 13.0 + 1.0 21 + 1.0 100 + 1.0 7" 4K/Reel 2.0 + 0.5 13.5 + 1.0 21 + 1.0 60 + 1.0 13" 16K/Reel 2.0 + 0.5 13.5 + 1.0 21 + 1.0 100 + 1.0 11.5 + 2.0 178 + 2.0 16.0 + 2.0 178 + 2.0 20 Max 254 + 2.0 16.0 + 2.0 178 + 2.0 20 Max 330 + 2.0 TAPING SPECIFICATION Paper Type (P= 2.0 ± 0.1) Size RMQ06 (0603) RMQ10 (0805) RMQ12 (1206) RMQ50 (2010) RMQ1W (2512) A B W E F G H T ɸD 1.05 + 0.20 1.80 + 0.20 8.0 + 0.20 1.75 + 0.10 3.5 + 0.05 4.0 + 0.10 2.0 + 0.05 0.60 + 0.10 1.50 + 0.10 1.55 + 0.20 2.30 + 0.20 8.0 + 0.20 1.75 + 0.10 3.5 + 0.05 4.0 + 0.10 2.0 + 0.05 0.75 + 0.10 1.50 + 0.10 1.90 + 0.20 3.50 + 0.20 8.0 + 0.20 1.75 + 0.10 3.5 + 0.05 4.0 + 0.10 2.0 + 0.05 0.75 + 0.10 1.50 + 0.10 2.80 + 0.20 5.50 + 0.20 12.0 + 0.30 1.75 + 0.10 8.5 + 0.05 4.0 + 0.10 2.0 + 0.05 0.75 + 0.10 1.50 + 0.10 3.50 + 0.20 6.70 + 0.20 12.0 + 0.30 1.75 + 0.10 8.5 + 0.05 4.0 + 0.10 2.0 + 0.05 0.75 + 0.10 1.50 + 0.10 Page 3 of 4 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C2BB01 2015.04.15 SURFACE MOUNT RESISTOR RoHS RMQ Series: Thick Film, High Voltage 100K~100M Ω Legal Disclaimer Notice All products, specifications and data are subject to change without notice to improve design, reliability, function and other product or regulatory reasons. No license, or intellectual property rights is granted by this disclaimer document. RFE International, Inc. including its affiliates, agents, employees, officers and any person acting on its or their collective behalf, disclaim any and all liability for errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product or service. RFE makes no warranty, guarantee or representation regarding the suitability of a product for any particular purpose or the continuing production of any product. RFE disclaims any and all liability arising out of the application or use of any product, any and all liability, including without limitation, special consequential or incidental damages and any and all implied warranties, including warranties of fitness for particular purpose. Any statements regarding the suitability of any product for certain applications are based on knowledge of product requirements that RFE may have observed when products are applied in generic applications. Any statement is not a binding statement about the suitability of any product for specific application. The customer is responsible to validate that a particular product for a particular application. Product specifications included in any datasheet or specification may vary in different application and performance may vary over time. All product specification must be validated for each customer application by the customer's technical staff. Product specifications do not modify RFE's terms and conditions of purchase including but not limited to the warranty expressed therein. RFE product are not designed for use in medical, life-saving, or life-support applications or other applications in which the failure of the RFE product may result in personal injury or death. Material Category Statement RFE International, Inc. certifies that all its products that are identified as RoHS Compliant fulfill the definitions defined under Directive 2011/65/UE concerning the restriction of the use of certain hazardous substances in electrical & electronic equipment. RFE certifies that all its products that are identified as Halogen-Free follow the JEDEC JS709A standards concerning Halogen Free products. Page 4 of 4 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C2BB01 2015.04.15