MULTILAYER CERAMIC CAPACITOR RoHS AD Series (C0G/NPO): Axial Leaded INTRODUCTION FEATURES Radial Leaded Multilayer Ceramic Capacitors are made with a superior epoxy coating for moisture and mechanical protection. The small size is suitable for a wide range of applications, including: data processing, telecommunications, instrumentation, and industrial controls. • Epoxy Coating • Minature Size • Auto Insertable • Operating Temperature Range -55 to 125°C • Temperature Characterisistics 0 ± 30 PPM/°C PART NUMBER EXAMPLE AD10 CG 104 K 500 R Packing Code Temperature Coefficient Voltage Code Tolerance Code P=5.0+/-0.5mm T1=6.0+/-0.3mm W=52+/-1 L1=L2=24 SIZE CODE & CAPACITANCE RANGE Dimensions (mm) Size Code T (max) AD10 2.6 AD15 4.0 3.1 Voltage Vdc Voltage Code 6.3V 10V 16V 25V 50V 100V 250V 6.3V 10V 16V 25V 50V 100V 250V 500V 060 100 160 250 500 101 251 60 100 160 250 500 101 251 501 C0G / NPO (pF) D (max) 5.1 1 ~ 10,000 1 ~ 4,700 100 ~ 2,700 3,900 ~ 33,000 3,900 ~ 10,000 3,300 ~ 8,200 100 ~ 3,300 CAPACITANCE CODE Code Capacitance 1R0 3R3 100 470 101 102 222 1.0pF 3.3pF 10pF 47pF 100pF 1000pF 2200pF 103 10000pF 333 33000 pF Page 1 of 4 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C1BD03 2012.12.13 MULTILAYER CERAMIC CAPACITOR RoHS AD Series (C0G/NPO): Axial Leaded TOLERANCE CODE Symbol Cap. TEMPERATURE COEFFICIENT Tol. C ±0.25pF D ±0.5pF F ±1% G ±2% J ±5% K ±10% M ±20% Code Temp. Charact. Temperature Range Capacitance Change CG C0G/NPO -55 ~ 125°C 0±30 ppm/°C X5R X5R -55 ~ 85°C ±15°C XR X7R -55 ~ 125°C ±15°C YV Y5V -30 ~ 85°C +22°C, -82% ZU Z5U +10 ~ 85°C +22°C, -56% * See other AD Series for X5R, X7R, Y5V, Z5U +80%, -20% Z DIMENSIONS Tape Spec. Symbol Dimension (mm) 5.08±0.51 Pitch of component P Culmulative Tolerance of P ±0.15 Over 6 Consecutive Units. 6.0±1.0 Tape Width Wt Lead Wire Protrusion Le 1.0 max Lead Extension into Tape Li 1.5 max Offset Between Tapes T 0.8 max 52.4±1.5 Width Between Tapes W Lead Diameter d 0.483 Reel Spec. Centered Core Diameter Reel Diameter Core Width Recess Depth Arbor Hole Deflection from Nominal Position Symbol Dimension (mm) ±0.76 C D1 34.9-92.1 Standard 82 D2 360 max Standard 340 W1 67(+1.5, -0) 9.5 min. R Standard 16 13.89-38.10 H0 Standard 17 h 1.2 max Page 2 of 4 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C1BD03 2012.12.13 MULTILAYER CERAMIC CAPACITOR RoHS AD Series (C0G/NPO): Axial Leaded ELECTRICAL CHARACTERISTICS C0G/NPO Specification Parameter Capacitance Q Measuring Condition With the specified tolerance Shall be measured at 25°C ± 2°C at the frequency and voltage C=> 30pF : Q=> 1000 C < 30pF : Q=> 400+20xC (C is nominal capacitance) C< = 1000pF@1MHz ± 20%, 1±0.2Vrms C > 1000pF@1MHz ± 10%, 1±0.2Vrms Applied voltage: Rated voltage x 2.5 Withstanding Voltage Insulation Resistance No defects 100V~500V Rated voltage (over) x 1.5 Duration: 1 to 5 sec. The charge/discharge current is less than 50mA More than 10GΩ or 500MΩ • µF Whichever is less Apply rated voltage for 1 minute at 25°C ± 2°C and 70% R.H. max 16Vdc product: More than 10GΩ or 100MΩ • µF whichever is less 16Vdc product: Measurement voltage is 25Vdc STORAGE 1. The storage conditions <40°C, < 70% R.H. 2. After opening the package, please store in desiccators. ENVIRONMENTAL AND TEST CHARACTERISTICS Parameter Strength of Specification Measuring Condition Termination not to be broken or loosened termination Force : 4 LB min. Keep time : 10±1 sec. Solderability Lead wire to be soldered vertically up to the coating end point. of leads At least 75% of lead surface is covered Solder temperature: 260 ± 5°C Dipping: 2 ± 0.5 sec. (containing Ag 2~5%) (Flux shall be used) Page 3 of 4 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C1BD03 2012.12.13 MULTILAYER CERAMIC CAPACITOR RoHS AD Series (C0G/NPO): Axial Leaded ELECTRICAL CHARACTERISTICS C0G/NPO Item Measuring Condition Specification Resistance to Soldering heat Measuring Condition Thermal shock The lead wire is immersed in the melted solder 1.5mm to 2mm from the main body at 260 ± 5°C for 10 ± 0.5sec Let sit at room temperature for 24 ± 2hrs.then measure. More than 10GΩ or 500MΩ • µF Whichever is less Perform the initial measurement. 16Vdc product: More than 10GΩ or 100MΩ • µF whichever is less Step 1 Min. Temp. Operating (℃) Temp. Time 30±3 2 Room Temp. 15 3 Max. Operating Temp. 30±3 4 Room Temp. 15 Perform the initial measurement. Measuring Condition Measuring Condition Moisture resistance (Steady state) High temperature loading Apply the rated DC voltage at 40 ± 2°C and 90 to 95% R.H. for 500+- 240 hrs. Remove and let sit at room temperature for24 ± 2 hrs., then measure. More than 1000MΩ or 50MΩ • µF Whichever is less Perform the five cycles according to the four heat treatments listed in the following table. Remove and let sit at room temperature for 24 ± 2hrs., then measure. Apply 200%of the rated DC voltage for 1000 +48 - 0 hrs at the maximum operating temperature ± 2°C. Remove and let sit at room temperature for 24 ± 2hrs, then measure. The charge/discharge current is less than 50mA. Perform the initial measurement. Perform the initial measurement. * 100% for 100V～500V over. 16Vdc product: More than 1000MΩ or 10MΩ • µF whichever is less • Withstanding voltage: No defects • Exterior: No abnormalities Page 4 of 4 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C1BD03 2012.12.13