MULTILAYER CERAMIC CAPACITOR RoHS RD Series (C0G/NPO): Radial Leaded INTRODUCTION FEATURES Radial Leaded Multilayer Ceramic Capacitors are made with a superior epoxy coating for moisture and mechanical protection. The small size is suitable for a wide range of applications, including: data processing, telecommunications, instrumentation, and industrial controls. • Epoxy Coating • Minature Size • Auto Insertable • Operating Temperature Range -55 to 125℃ • Temperature Characterisistics 0 ± 30 PPM/℃ PART NUMBER EXAMPLE W T W RD 25 CG 104 M 101 B XX XX Lead Forming Size code Temperature Lead Code Packing Code Voltage Code 7.62 mm max H H MIN 20mm Tolerance Code d d=0.5±0.05 F SIZE CODE & CAPACITANCE RANGE Dimensions (mm) Size Code RD2 W * 4.0 5.0 * RD3 H Voltage Vdc 6.3V 10V 16V 25V 50V 100V 250V 6.3V 10V 16V 25V 50V 100V 250V 500V T 2.5 4.0 5.0 3.0 Voltage Code C0G/NPO (pF) 060 100 160 250 500 101 251 1~10,000 1~4,700 100~2,700 060 100 160 250 500 101 251 501 3,900~33,000 3,900~10,000 3,300~8,200 100~3,300 * 2 = 2.5mm ± 1mm Lead Spacing, F Dimension * 5 = 5.0mm ± 1mm Lead Spacing, F Dimension CAPACITANCE CODE Code Capacitance 1R0 3R3 100 470 101 102 222 1.0pF 3.3pF 10pF 47pF 100pF 1000pF 2200pF 103 10000pF 333 33000 pF Page 1 of 4 C1BD01 2011.08.16 MULTILAYER CERAMIC CAPACITOR RoHS RD Series (C0G/NPO): Radial Leaded TOLERANCE CODE Symbol Cap. TEMPERATURE COEFFICIENT Tol. C ±0.25pF D ±0.5pF F ±1% G ±2% J ±5% K ±10% M ±20% Code Temp. Charact. Temperature Range Capacitance Change CG C0G/NPO -55 ~ 125℃ 0±30 ppm/℃ X5R X5R -55 ~ 85℃ ±15℃ XR X7R -55 ~ 125℃ ±15℃ YV Y5V -30 ~ 85℃ +22℃, -82% ZU Z5U +10 ~ 85℃ +22℃, -56% * See other RD Series for X5R, X7R, Y5V, Z5U TAPING & PACKAGING ±80%, -20% Z PACKAGING CODE CODE Code STYLE Style Quantity QTY B BULK 1000 A AMMO 3000 R REEL 3000 Lead Forming Code Stand off forming KO Kink Out KI Kink In LEAD LENGTH EXAMPLE (Bulk Only) Code 20 Length (mm) standard 04 10 16 30 4±1 10±1 16±1.5 1 30±3 Page 2 of 4 C1BD01 2011.08.16 MULTILAYER CERAMIC CAPACITOR RoHS RD Series (C0G/NPO): Radial Leaded ELECTRICAL CHARACTERISTICS C0G/NPO Specification Parameter Capacitance Measuring Condition Shall be measured at 25 ℃ ± 2℃ at the With the specified tolerance frequency and voltage C ≧ 30pF：Q ≧1000 Q C＜30pF：Q ≧ 400 + 20 × C C ≦1000pF＠1MHz ± 20% ,1 ± 0.2Vrms (C is nominal capacitance) C ＞1000pF＠1KHz ± 10 % ,1 ± 0.2Vrms Applied voltage： Rated voltage × 2.5 Withstanding Voltage 100V～500V Rated voltage(over) ×1.5 No defects Duration：1 to 5 sec. The charge/discharge current is less than 50mA Insulation Resistance More than 10GΩ or 500MΩ‧μr Apply rated voltage for 1 minute whichever is less at 25℃ ± 2℃ and 70%R.H.max. 16Vdc product： More than 10GΩ or 100M Ω‧μr 16Vdc product： whichever is less Measurement voltage is 25Vdc STORAGE 1. The storage conditions < 40℃, <70% R.H. 2. After opening the package, please store in desiccators. ENVIRONMENTAL AND TEST CHARACTERISTICS Parameter Specification Measuring Condition Termination not to be broken or loosened Strength of termination Solderability of leads Force：2 LB min. Keep time：10 ±1 sec. Lead wire to be soldered vertically up to the coating end point. At least 75%of lead surface is covered Solder temperature: 260 ± 5℃ Dipping: 2 ± 0.5 sec. (Containing Ag 2~5%) (Flux shall be used) Page 3 of 4 C1BD01 2011.08.16 MULTILAYER CERAMIC CAPACITOR RoHS RD Series (C0G/NPO): Radial Leaded ELECTRICAL CHARACTERISTICS C0G/NPO Item Specification Measuring Condition Measuring Condition Resistance to Soldering heat ±2.5% or ± 0.25pF C (Whichever is greater) Q C ≧ 30pF: Q ≧ 1000 C＜30pF: Q ≧ 400 + 20 X C (C is nominal capacitance) More than 10G or 500M ‧μF, whichever is less. I.R. 16V dc product: More than 10G or 100M ‧μF, whichever is less. Item Specification Thermal shock The lead wire is immersed in the melted solder 1.5mm to 2mm from the main body at 260 ± 5℃ for 10 ± 0.5sec Let sit at room temperature for 24 ± 2hrs.then measure. Perform the five cycles according to the four heat treatments listed in the following table. Remove and let sit at room temperature for 24 ± 2hrs., then measure. Step Perform the initial measurement. 1 2 Min. Temp. Room Operating (℃) Temp. Temp. Time 15 30± 3 3 4 Max. Room Operating Temp. Temp. 15 30± 3 Perform the initial measurement. Measuring Condition Measuring Condition Moisture resistance (Steady state) High temperature loading (Whichever is greater) Apply the rated DC voltage at 40 ± C ± 5% or ± 0.5pF(Moisture resistance) +24 ± 3% or ± 0.5pF(High temperature loading) 2℃ and 90 to 95% R.H. for 500- 0 hrs. C ≧ 30pF: Q ≧ 350 5 10pF>C<30pF: Q ≧ 275 + 2 X C Q Remove and let sit at room C < 10pF: Q ≧ 200+10XC temperature for24 ± 2 hrs., then (C is nominal capacitance) measure. More than 1000M or 50M ‧μF, Perform the initial measurement. whichever is less. I.R. 16V dc product: More than 1000G or 10M ‧μF, whichever is less. Apply 200%of the rated DC voltage for 1000 +48 - 0 hrs.at the maximum operating temperature ± 2℃. Remove and let sit at room temperature for 24 ± 2hrs.,then measure. The charge/discharge current is less than 50mA. Perform the initial measurement. *1 00% for 100V～500V over. • Withstanding voltage: No defects • Exterior: No abnormalibis Page 4 of 4 C1BD01 2011.08.16