HIGH VOLTAGE SILICON RECTIFIER RoHS GP02-25 Thru GP02-60 0.2Amp FEATURES • Avalanche operation • UL 94V0 flame retardant epoxy molding compond • Beveled round chip • RoHS compliance MECHANICAL DATA DO-41 (GP02-25 & GP02-30) • Transfer molded case • Solderable leads per MIL-STD-202, method 208 • Cathode indicated by color band • Weight: 0.35 grams(DO-41) 0.40 grams(DO-15) DO-15 (GP02-35 Thru GP02-50) MAXIMUM RATINGS & ELECTRICAL CHARACTERISTICS Note: 2500V & 3000V use DO41 package, 3500V thru 6000V, use Do15 package Parameter Symbol GP02-25 GP02-30 GP02 -35 GP02-40 GP02-50 GP02-60 Unit Maximum Recurrent Peak Reverse Voltage V RRM 2500 3000 3500 4000 5000 6000 V Maximum RMS Voltage V RMS V DC 1750 2100 2450 2800 3500 4200 V 2500 3000 3500 4000 5000 6000 V Maximum DC blocking Voltage 0.2 IO Peak Forward Surge Current, 8.3ms single half sine-wave superimposed on rated load Typical Junction Capacitance Measured At 1MH Z and applied reverse voltage at 4.0 volts I FSM 25 20 A CJ 7 5 pF 50 Typical Thermal Resistance (Note 1 ) Storage Temperature Range T STG -55 to +150 Operating Temperature Range T OP -55 to +125 O A VF 3.0 5.0 7.0 V IR 5 A IR 50 A Page 1 of 2 C3CH01 2011.05.04 HIGH VOLTAGE SILICON RECTIFIER RoHS GP02-25 Thru GP02-60 0.2Amp I O-PERCENT OF AVERAGE RECTIFIED CURRENT (%) FIG. 1 MAXIMUM CURRENT RATING EFFECT OF COPPER AREA. RESISTIVE/INDUCTIVE LOAD A=20 mm 100 A=10 mm 80 A=5.5 mm 60 10mm 10mm 40 20 PC BOARD COPPER AREA o 0 20 40 60 80 100 120 140 160 INSTANTANEOUS REVERSE CURRENT MICROAMPERES RATING & CHARACTERISTIC CURVES FIG. 4 TYPICAL REVERSE CHARCTERISTICS AT TJ °C 10 1.0 0.1 .01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE RESISTIVE/INDUCTIVE 100 5 C APACTIVE LOADS 10 80 20 60 10mm 40 10mm 20 COPPER AREA 5.5 mm 0 0 20 40 PC BOARD FORWARD SURGE CURRENT, PK AV FIG. 5 MAXIMUM FORWARD SURGE VS NUMBER OF CYCLES 30 24 GP02-25-LF~40-LF 18 12 6 GP02-50-LF~60-LF 0 1 60 80 100 120 140 160 10 100 NO. OF CYCLES AT 60H Z FIG. 3 MAXIMUM CURRENT RATING EFFECT OF COPPER AREA. RESISTIVE/INDUCTIVE LOAD L=5mm 100 L=10mm 80 L=20mm 60 10mm 10mm 40 20 COPPER AREA 0 20 40 PC BOARD CJ-JUNCTION CAPACITANCE (PF) IO-PERCENT OF AVERAGE RECTIFIED CURRENT (%) FIG. 2 MAXIMUM CURRENT RATING CAPACITIVE LOAD, 10mm LEAD LENGTHS FIG. 6 TYPICAL JUNCTION CAPACITANCE 100 10 GP02-25-LF~40 -LF GP02-50-LF~60-L F 0 60 80 100 120 140 160 10 100 1000 VR-REVERSE VOLAGE (V) Page 2 of 2 C3CH01 2011.05.04