Bulletin 112 IEC Combination Starters 3 Fusible and Non-Fusible Disconnect Type Bulletin 112 Cat. No. 112-C09FBA1F-1-7 IP66 (Type 3,4,12) Metal Enclosure with Hinged Cover • Compact Design • Can Be Modified in the Field • Selection of Enclosures IP42 (Type 1) and IP66 (Type 3/4/12) • Bimetallic Class 10 Overload Relays • Solid-State Overload Relays • Fusible or Non-Fusible Versions • Handle with Defeater Mechanism • Padlockable Handle with up to Three Padlocks TABLE OF CONTENTS Description Page Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-75 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-89 Description Page Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-100 Approximate Dimensions . . . . . . . . . . . . . . . . . . . . 3-105 and 3-108 Description Bulletin 112 is the first true IEC combination starter on the market, in that the enclosure and components have been designed to specific IEC standard requirements. The Bulletin 112 combination starter consists of a Bulletin 100 Contactor, Bulletin 193 bimetallic (Class 10) or solid-state overload relay and Bulletin 194R fused disconnect switch installed in a common enclosure. These full-voltage combination starters are designed to provide the disconnecting means, short-circuit protection (with suitable fuses), control and overload protection for three-phase squirrel-cage motors. All starters include a normally open auxiliary contact as standard. Conformity to Standards: Approvals: IEC 947 VDE 0660 CSA 22.2 UL 508 cUL US A-B EXPRESS Fast Shipment Program • Fast shipment of Bulletin 112 IEC Products to satisfy your unexpected demands. • Make your selections from any of the Cat. Nos. printed in blue and identify your order as Your order must include: • Cat. No. of the combination starter selected. • Coil Voltage Code. • Overload Relay Suffix Code. • If required, factory-installed modifications suffix code. • If required, Cat. No. of any accessories. 3-74 Bulletin 112 IEC Combination Starters Product Selection Fusible Disconnect Type Fast Shipment Program Cat. Nos. are printed in blue. AC Operated Ratings (AC3, AC4) HP Max Ie [A] 3∅ 200V 230V 460V 575V Fuse Clip Rating Amperes/ UL Class IP42 (Type 1) General Purpose Sheet Metal Enclosure (Hinged Cover) IP66 (Type 3/4/12) Watertight, Dusttight Sheet Metal Enclosure (Hinged Cover) Cat. No. Cat. No. 9 2 2 5 7-1/2 30A/Class CC 112-C09A⊗✪ 112-C09F⊗✪ 12 3 3 7-1/2 10 30A/Class J 112-C12A⊗✪ 112-C12F⊗✪ 23 5 7-1/2 15 15 30A/Class J 112-C23A⊗✪ 112-C23F⊗✪ 30 7-1/2 10 20 25 60A/Class J 112-C30A⊗✪ 112-C30F⊗✪ 43 10 15 30 30 60A/Class J 112-C43A⊗✪ 112-C43F⊗✪ 60 15 20 40 50 100A/Class J 112-C60A⊗✪ 112-C60F⊗✪ 72 20 25 50 60 100A/Class J 112-C72A⊗✪ 112-C72F⊗✪ 110 30 40 75 100 200A/Class J 112-B110A⊗✪ 112-B110F⊗✪ 180 50 60 125 150 200A/Class J 112-A180A⊗✪ 112-A180F⊗✪ 180 60 — 150 — 400A/Class J 112-B180A⊗✪ 112-B180F⊗✪ 250 75 100 200 250 400A/Class J 112-B250A⊗✪ 112-B250F⊗✪ 300 100 100 250 300 400A/Class J 112-B300A⊗✪ 112-B300F⊗✪ ⊗ Coil Voltage Code The Cat. No. as listed is incomplete. Select a Coil Voltage Code from the table below to complete the Cat. No. Example: Cat. No. 112-C09A⊗✪ becomes Cat. No. 112-C09AB✪. Voltage Common Control ➊ Coil Voltage Code 120V — Separate Control (without transformer) Coil Voltage Code 208V 230…240V 460…480V 575…600V H A B C D D D D 60 Hz ✪ Overload Relay Code The Cat. No. as listed is incomplete. Select an overload relay code from page 3-87 or 3-88 to complete the Cat. No. ➊ When selecting a factory-installed control circuit transformer (see Modifications page 3-98), use the Common Control Coil Voltage Code to denote the transformer primary voltage. The starter coil and transformer secondary voltage will both be 120V by default. Example: Cat. No. 112-C09FB-✪-6P will have a transformer with a 480V primary/120V secondary and a 120V starter coil. If a starter coil voltage other than 120V is desired, a second Coil Voltage Code must be added to denote the coil/transformer secondary voltage. Example: Cat. No. 112-C09FBJ-✪-6P will have a transformer with a 480V primary/24V secondary and a 24V starter coil Accessories — Page 3-89 Modifications — Page 3-100 Approximate Dimensions — Page 3-105 and 3-108 3-75 Bulletin 112 IEC Combination Starters Product Selection, Continued Non-Fusible Disconnect Type Fast Shipment Program Cat. Nos. are printed in blue. AC Operated Ratings (AC3, AC4) HP Max Ie [A] IP42 (Type 1) General Purpose Sheet Metal Enclosure (Hinged Cover) IP66 (Type 3/4/12) Watertight, Dusttight Sheet Metal Enclosure (Hinged Cover) Cat. No. Cat. No. 3∅ 200V 230V 460V 575V 9 2 2 5 7-1/2 112-C09A⊗✪-DNF 112-C09F⊗✪-DNF 12 3 3 7-1/2 10 112-C12A⊗✪-DNF 112-C12F⊗✪-DNF 23 5 7-1/2 15 15 112-C23A⊗✪-DNF 112-C23F⊗✪-DNF 30 7-1/2 10 20 25 112-C30A⊗✪-DNF 112-C30F⊗✪-DNF 43 10 15 30 30 112-C43A⊗✪-DNF 112-C43F⊗✪-DNF 60 15 20 40 50 112-C60A⊗✪-DNF 112-C60F⊗✪-DNF 72 20 25 50 60 112-C72A⊗✪-DNF 112-C72F⊗✪-DNF 110 30 40 75 100 112-B110A⊗✪-DNF 112-B110F⊗✪-DNF 180 50 60 125 150 112-A180A⊗✪-DNF 112-A180F⊗✪-DNF 180 60 — 150 — 112-B180A⊗✪-DNF 112-B180F⊗✪-DNF 250 75 100 200 250 112-B250A⊗✪-DNF 112-B250F⊗✪-DNF 300 100 100 250 300 112-B300A⊗✪-DNF 112-B300F⊗✪-DNF ⊗ Coil Voltage Code The Cat. No. as listed is incomplete. Select a Coil Voltage Code from the table below to complete the Cat. No. Example: Cat. No. 112-C09A⊗✪-DNF becomes Cat. No. 112-C09AB✪-DNF. Voltage Common Control ➊ Coil Voltage Code 120V — Separate Control (without transformer) Coil Voltage Code 208V 230…240V 460…480V 575…600V H A B C AD AD CD CD 60 Hz ✪ Overload Relay Code The Cat. No. as listed is incomplete. Select an overload relay code from page 3-87 or 3-88 to complete the Cat. No. ➊ When selecting a factory-installed control circuit transformer (see Modifications page 3-98), use the Common Control Coil Voltage Code to denote the transformer primary voltage. The starter coil and transformer secondary voltage will both be 120V by default. Example: Cat. No. 112-C09FB-✪-DNF-6P will have a transformer with a 480V primary/120V secondary and a 120V starter coil. If a starter coil voltage other than 120V is desired, a second Coil Voltage Code must be added to denote the coil/transformer secondary voltage. Example: Cat. No. 112-C09FBJ-✪-DNF-6P will have a transformer with a 480V primary/24V secondary and a 24V starter coil. Accessories — Page 3-89 Modifications — Page 3-100 Approximate Dimensions — Page 3-105 and 3-108 3-76