F E D C B A 24,99 +- 0,13 0,12 11 `0,3 3,43 `0,1 3,2 `0,2 n3,2 `0,1 (2x) 6,35 `0,3 A1 n3,1 `0,1 (2x) D P.C.B. EDGE (5:1) 11,65 `0,3 9,35 12,45 `0,1 D P.C.B. HOLE DRILLINGS ( P.C.B. TOP SIDE ) 30,88 +- 0,31 0,45 0,8 16,41 +- 0,05 0,2 6,13 +- 0,17 0,08 24,99 +- 0,13 0,12 0,02 8 +- 0,23 12,6 +- 0,33 0,43 C 10° n2,85 (2x) PCB SNAP PRESS FOR FIXING ON PCB 12,1 METAL BRACKET C 302W2CSXX73P40X 8,55 `0,2 6,5 n4 4-40 UNC 11,3 max. CONEC ABC B B SEE NOTE 8 NOTES: 1. METALSHELLS: STEEL; min. 315µin TIN over 40-80µin NICKEL 2. INSULATOR: PBT GF UL 94 V-0; GREEN 3. HIGH POWER CONTACTS 20A: COPPER ALLOY PLATING MATING AREA: GOLD FLASH over NICKEL PLATING TERMINATION SIDE: 160-240µin TIN over 80µin NICKEL FEMALE CONTACT ON POS. A2; MALE CONTACT ON POS. A1 4. METAL BRACKETS: ZINC DIE CAST; 300µin COPPER/40-120µin NICKEL/120-200µin TIN 5. THREADED LOCKS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 6. PCB-SNAPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB-HOLE: n3.1`0,1; PCB THICKNESS 1.6mm 7. MAXIMUM TORQUE VALUE FOR THREAD: 6 in.LB Directive 2002/95/EC RoHS compliant F E DO NOT ALTER CAD DRAWING BY HAND A THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH 8. CONNECTOR IS PART MARKED: 302W2CSXX73P40X CONEC ABC scale: material: tolerance 2:1 (5:1) SEE NOTES dim. in mm date drawn 01.09.11 Lehmenkühler appd. 02.09.11 A title: name D-SUB COM. FEMALE 90° 2W2CS with threaded lock, metal bracket and snap dwg no: Inventor 10 DIN- Koch norm d-old Original rev. description D date part no: name C A3 sh: 1 13K1A3762 R a B 302W2CSXX73P40X A