F E D n3,1 `0,1 (2x) B 3,43 `0,1 A 11 `0,3 12,45 `0,1 24,99 +- 0,13 0,12 C 7,5 `0,3 D 11,5 D n4,1 `0,1 (2x) A1 (5:1) 11,65 `0,3 P.C.B. EDGE P.C.B. HOLE DRILLINGS 0,8 (P.C.B. TOP SIDE) 30,88 +- 0,31 0,45 6,13 +- 0,17 0,08 12,6 +- 0,33 0,43 24,99 +- 0,13 0,12 16,41 +- 0,05 0,2 C C 0,02 8 +- 0,23 n3,75 (2x) 14 `0,2 METAL BRACKET 302W2CSXX75G20X CONEC ABC REF. 14,8 10,7 `0,2 n3,18 (2x) 10° B B 4-40 UNC SEE NOTE 7 NOTES: 1. METALSHELLS: STEEL; min. 315µin TIN over 40-80µin NICKEL 2. INSULATOR: PBT GF UL 94 V-0; GREEN 3. HIGH POWER CONTACTS 40A: COPPER ALLOY PLATING MATING AREA: GOLD FLASH PLATING TERMINATION SIDE: 160-240µin TIN over 80µin NICKEL MALE CONTACT ON POS. A1; FEMALE CONTACT ON POS. A2 4. METAL BRACKETS: ZINC DIE CAST; 300µin COPPER/40-120µin NICKEL/120-200µin TIN 5. THREADED INSERTS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 6. MAXIMUM TORQUE VALUE FOR THREAD: 6 in.LB TITLE: COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL F E DO NOT ALTER CAD DRAWING BY HAND NAME: THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION 7. CONNECTOR IS PART MARKED: 302W2CSXX75G20X CONEC ABC scale: material: tolerance 2:1 (5:1) SEE NOTES dim. in mm A title: date name drawn 22.09.10 Henneboel D-SUB COM. FEMALE 90° appd. 22.09.10 Koch 2W2CS with threaded insert and metal bracket dwg no: Inventor 10 DIN- norm d-old Origin rev. description D date part no: name C A3 sh: 1 13K1A3432 R a B 302W2CSXX75G20X A